2014 Hyundai Equus Front Passenger seat

315
Safety features of your vehicle
Ty p e A
After pressing the FRONT switch,
you can adjust the front passenger
seat forward and backward (1), and
adjust the seat back angle (2).
Type B, C
Additional switches are provided to
move front passenger seat forward
and backward (1), and adjust the seat-
back angle (2) from the rear seats.
Type D
While pressing the button, the front
passenger seat moves forward and
backward, and adjusts the seatback
angle.
Additional switches for adjusting the front passenger seat (if equipped)
■Type A
■ Type B
OVI033014/OVI033081/OVI033016N/OVI033015N
■Type C
■ Type D

Safety features of your vehicle
16 3
Lumbar support
(for rear right and left passenger’s
seat) (if equipped)
• For right side :
Press the R switch.
The lumbar support can be adjusted
by pressing the lumbar support
switch. Press the front portion of the
switch (1) to increase support or the
rear portion of the switch (2) to
decrease support.
To move the support position up or
down, press the switch (3) or (4).• For left side :
Press the L switch.
The lumbar support can be adjusted
by pressing the lumbar support
switch. Press the front portion of the
switch (1) to increase support or the
rear portion of the switch (2) to
decrease support.
To move the support position up or
down, press the switch (3) or (4).
Rear switches operating limi-
tation (if equipped)
Ty p e A
• LOCK ON : When the switch is
pressed, the indicator will illumi-
nate and switch lock function is
operated.
OVI033029
OVI033082
OVI033083
■Type A
■ Type B

317
Safety features of your vehicle
• LOCK OFF : When the switch is
pressed, the indicator will illumi-
nate and switch lock is cancelled.
Ty p e B
• LOCK : When the switch is
pressed, the indicator will illumi-
nate and switch lock function is
operated. If you press again, the
indicator will turn off and switch
lock is cancelled.
❈If your vehicle is for 2 seater in rear
seat, the switch lock is controlled
by AVN. Refer to the AVN manual.VIP Convenience function
(3 seat configuration)
The rear seat passenger may use
the switches to control the rear right
seat or front passenger seat.Front passenger side walk-in seat
Press the switch (1);
The seatback will adjust.
Press the switch (2);
The seat will move forward and back-
ward.
OVI033017
OVI033018
■Type A
■ Type B
OVI039062

Safety features of your vehicle
18 3
Rear relaxation seat system
Press the switch (3);
The front passenger seat and the
rear right side passenger seat will
move to its original position. After the
operation is completed, a beep will
sound.
Press the switch (4);
The front passenger seat will move
forward and the seatback will fold
automatically. Then the rear right
side passenger seat seatback will
lean towards the back of the vehicle.
After the operation is completed, a
beep will sound once.
VIP Convenience function
(2 seat configuration)
The rear seat passenger may use
the switches to control the rear right
seat or front passenger seat.Front passenger side walk-in seat
Press the switch (1);
The passenger seat will move for-
ward and the seatback will fold auto-
matically.
If you want to use as seat, press the
switch (3).
OVI033091
OVI033092
■Type A
■ Type B
OVI039062OVI033063N

319
Safety features of your vehicle
Rear relaxation seat system
Press the switch (2);
The front passenger seat will move
forward and the seatback will fold
automatically. And then the rear right
seat cushion will move forward and
leg support will move up. While oper-
ating the system, if you press the
switch again, the system will stop.
When the operation is completed,
the buzzer beeps.Return function (Sedan)
While the seat is moving by relax
mode operation, if the switch (3) is
pressed shortly, the rear seat is
moved to rearmost position.
However, if the switch (3) is pressed
more than 1 second, the rear seat is
moved to rearmost position and the
leg support is moved down. The front
passenger seat will automatically
move to its original position. When
the operation is completed, the
buzzer beeps.
Return function (Limousine)
While the seat is moving by relax
mode operation, if the switch (3) is
pressed shortly, the seat is moved to
previous mode.
However, if the switch (3) is pressed
more than 1 second, the rear seat is
moved to rearmost position and the
leg support is moved down. The front
passenger seat will automatically
move to its original position. When
the operation is completed, the
buzzer beeps.Leg support
• Press the switch (4);
The leg support will move down.
• Press the switch (5);
The leg support will move up.
Foot rest
• Press the switch (6);
The foot rest will move down.
• Press the switch (7);
The foot rest will move up.
OVI039063

327
Safety features of your vehicle
Seat belt restraint system
SEAT BELTS
WARNING
• For maximum restraint sys-
tem protection, the seat belts
must always be used whenev-
er the car is moving.
• Seat belts are most effective
when seatbacks are in the
upright position.
• Children age 12 and under
must always be properly
restrained in the rear seat.
Never allow children to ride in
the front passenger seat. If a
child over 12 must be seated
in the front seat, he/she must
be properly belted and the
seat should be moved as far
back as possible.
(Continued)
WARNING
Seat belts are designed to bear
upon the bony structure of the
body, and should be worn low
across the front of the pelvis or
the pelvis, chest and shoulders,
as applicable; wearing the lap
section of the belt across the
abdominal area must be avoided.
Seat belts should be adjusted
as firmly as possible, consis-
tent with comfort, to provide the
protection for which they have
been designed.
A slack belt will greatly reduce
the protection afforded to the
wearer.
(Continued)
(Continued)
• Never wear the shoulder belt
under your arm or behind
your back. An improperly
positioned shoulder belt can
cause serious injuries in a
crash. The shoulder belt
should be positioned midway
over your shoulder across
your collarbone.
• Never wear a seat belt over
fragile objects. If there is a
sudden stop or impact, the
seat belt can damage it.
• Avoid wearing twisted seat
belts. A twisted belt can't do
its job as well. In a collision, it
could even cut into you. Be
sure the belt webbing is
straight and not twisted.
• Be careful not to damage the
belt webbing or hardware. If
the belt webbing or hardware
is damaged, replace it.

333
Safety features of your vehicle
To release the seat belt:
When you want to release the seat
belt, press the button (1) in the lock-
ing buckle.
Pre-tensioner seat belt
Your vehicle is equipped with driver's
and front passenger's pre-tensioner
seat belts. The purpose of the pre-
tensioner is to make sure that the
seat belts fit tightly against the occu-
pant's body in certain frontal colli-
sions. The pre-tensioner seat belts
may be activated in crashes where
the frontal collision is severe enough.
When the vehicle stops suddenly, or
if the occupant tries to lean forward
too quickly, the seat belt retractor will
lock into position. In certain frontal
collisions, the pre-tensioner will acti-
vate and pull the seat belt into tighter
contact against the occupant's body.If the system senses excessive ten-
sion on the driver or passenger's
seat belt when the pre-tensioner acti-
vates, the load limiter inside the pre-
tensioner will release some of the
pressure on the affected seat belt. (if
equipped)
B210A02NF-1
WARNING
The center lap belt latching
mechanism is different from
those for the rear seat shoulder
belts. When fastening the rear
seat shoulder belts or the cen-
ter lap belt, make sure they are
inserted into the correct buck-
les to obtain maximum protec-
tion from the seat belt system
and assure proper operation.
OED030300
WARNING
For your safety, be sure that the
belt webbing is not loose or
twisted and always sit properly
on your seat.

Safety features of your vehicle
34 3
The seat belt pre-tensioner system
consists mainly of the following com-
ponents. Their locations are shown in
the illustration:
1. SRS air bag warning light
2. Retractor pre-tensioner assembly
3. SRS control module
✽NOTICE
• Both the driver's and front pas-
senger's pre-tensioner seat belts
may be activated in certain frontal
collisions.
The pre-tensioners will not be acti-
vated if the seat belts are not being
worn at the time of the collision.
• When the pre-tensioner seat belts
are activated, a loud noise may be
heard and fine dust, which may
appear to be smoke, may be visible
in the passenger compartment.
These are normal operating condi-
tions and are not hazardous.
• Although it is harmless, the fine
dust may cause skin irritation and
should not be breathed for pro-
longed periods. Wash all exposed
skin areas thoroughly after an
accident in which the pre-tension-
er seat belts were activated.
OBH038100
WARNING
To obtain maximum benefit
from a pre-tensioner seat belt:
1. The seat belt must be worn
correctly and adjusted to the
proper position. Please read
and follow all of the important
information and precautions
about your vehicle’s occupant
safety features – including
seat belts and air bags – that
are provided in this manual.
2. Be sure you and your passen-
gers always wear seat belts
properly.