2014 HYUNDAI COUPE warning

[x] Cancel search: warning

Page 442 of 546

HYUNDAI COUPE 2014  Owners Manual 7-6
Maintenance
Maintenance work
•Performing maintenance work
on a vehicle can be danger-
ous. You can be seriously
injured while performing
some maintenance proce-
dures. If you lack sufficient
kno

Page 443 of 546

HYUNDAI COUPE 2014  Owners Manual 7-7
7
Maintenance
OWNER MAINTENANCE 
The following lists are vehicle checks
and inspections that should be per-
formed at the frequencies indicated
to help ensure safe, dependable
operation of your ve

Page 444 of 546

HYUNDAI COUPE 2014  Owners Manual 7-8
Maintenance
At least monthly:
• Check coolant level in the engine
coolant reservoir.
• Check the operation of all exterior
lights, including the stop lamps,
turn signals and hazard warning
fla

Page 459 of 546

HYUNDAI COUPE 2014  Owners Manual 7-23
7
Maintenance
Vacuum crankcase ventilation
hoses (if equipped)
Inspect the surface of hoses for evi-
dence of heat and/or mechanical
damage. Hard and brittle rubber,
cracking, tears, cuts, abrasi

Page 462 of 546

HYUNDAI COUPE 2014  Owners Manual 7-26
Maintenance
ENGINE OIL
Checking the engine oil level  
1. Be sure the vehicle is on level
ground.
2. Start the engine and allow it to
reach normal operating tempera-
ture.3. Turn the engine off a

Page 463 of 546

HYUNDAI COUPE 2014  Owners Manual 7-27
7
Maintenance
If it is near or at L, add enough oil to
bring the level to F.Do not overfill.
Use a funnel to help prevent oil
from being spilled on engine com-
ponents.
Use only the specified eng

Page 464 of 546

HYUNDAI COUPE 2014  Owners Manual 7-28
Maintenance
ENGINE COOLANT
The high-pressure cooling system
has a reservoir filled with year-round
antifreeze coolant. The reservoir is
filled at the factory.
Check the antifreeze protection and

Page 465 of 546

HYUNDAI COUPE 2014  Owners Manual 7-29
7
Maintenance
Check the condition and connections
of all cooling system hoses and
heater hoses. Replace any swollen
or deteriorated hoses.
The coolant level should be filled
between F (MAX) and L