2014 HONDA INSIGHT display

97
XXMap MenuXMap Legend
Navigation
■Traffic icon
Select the map orientation icon to change the map orientation.
TypeIcon display
control Icon
selectable Icon
searchable
Traffic speedYesNoNo
Traffic incident Yes Yes No
■ Map Orientation
1 Traffic Incident
When you use the joystick to position the cursor
(round red circle) over a traffic incident icon, you
can view a summary of the incident.
Press the ENTER button on the traffic incident
icon to view a pop-up message describing the
incident in detail.
1 Map Orientation
d “Display Heading-up” (from map screen), d
“Display North-up” (from map screen)
The red arrow in the symbol always points North.
On scales greater than 1 mile, North-up mode is
always used.
Map orientation icon
North-up : Displays the map with
North always pointing up. Map orientation icon
Heading-up : Displays the map
so that the direction you are
traveling is always pointing up.
Select
Select
INSIGHT_KA-31TM8820.book 97 ページ ２０１１年８月９日　火曜日　午後３時３１分

98
XXMap MenuXMap Legend
Navigation
Display and save your current location for future use as a destination. The address,
latitude, longitude, and elevation of your current location are displayed.
■ To save your current loca tion in the address book:
1.Select the vehicle icon on the map.
2. Select Save.
3. Edit the name, phone number, and
category.
2 Address Book P. 31
4. Select OK.
■Current Location1 Current Location
d “Display Current Location” (on map screen)
You can also save the current location by saying
d “Register the Current Location” .
If you have PIN-protec ted your address book,
enter your PIN when prompted. Select OK. PINs
are optional.
2 PIN Numbers P. 37
The elevation is not displayed if the system is
receiving insufficient GPS information. When
elevation is displayed, it may differ with roadside
elevation signs by ±100 feet or more.
Saving your current loca tion does not change or
cancel your current route.
INSIGHT_KA-31TM8820.book 98 ページ ２０１１年８月９日　火曜日　午後３時３１分

99
XXMap MenuXFM Traffic
Navigation
FM Traffic
HMAP MENU (on map) X Traffic Incidents
View and avoid specific incidents and/or congestion on your route: 1.Select an incident from the list.
XThe system displays the map
screen and the incident location.
2. Select Traffic Detail .
1FM Traffic
You must be in or near a traffic-enabled city to
receive coverage for that area. FM Traffic is
available in the lower 48 states and Hawaii.
Automatic traffic rerouting may not provide a
detour route dependi ng on circumstances.
d “Display traffic list”
You can also display traff ic incidents from the
INFO screen.
You can display traffic incidents and related
information on the map screen using voice
commands.
2 Map Display Commands P. 188
Continued
INSIGHT_KA-31TM8820.book 99 ページ ２０１１年８月９日　火曜日　午後３時３１分

101
Navigation
Changing Your Route
HDEST button (when en route)
This section describes how to alter your r oute, add an interim “waypoint” (pit stop),
choose a different destination, cancel your current destination, and continue your
trip after stopping.
Select an item.
The following items are available:
• Cancel Route : Cancels the route guidance.
2Canceling the Route P. 102
• Detour : Calculates a detour route.
2Taking a Detour P. 102
• Avoid Streets : Avoids streets along your route.
2Avoiding Streets P. 102
• Change Route Pref. : Changes the route preferences (calculating method).
2Changing the Route Preference P. 78
• Waypoint : Sets waypoints along your route.
2Adding Waypoints from the Route Menu P. 104
• My Destination : Shows a list of waypoints. You can delete waypoints or edit the
order of them.
2 Editing My Destination P. 107
1Changing Your Route
d “Display Menu” , d “Display Navigation”
(when en route)
If you press the DEST but ton when not en route,
the Destination Menu screen is displayed.
2 Entering a Destination P. 56
INSIGHT_KA-31TM8820.book 101 ページ ２０１１年８月９日　火曜日　午後３時３１分

103
XXChanging Your RouteXAdding Waypoints
Navigation
2.Select OK.
XThe system calculates a new
route.
Adding Waypoints
Add up to four waypoints (pit stops) along the route to your destination.
Waypoints are displayed on the map
screen as small, numbered red flags.
The route follows the waypoints in
the order they are listed in the
destination list.
1 Adding Waypoints
Waypoints allow you to stop for gas or food, for
example, and then continue on to your
destination.
Press the MAP/GUIDE button to return to the
map screen without adding a waypoint at any
time.
The search corridor used for adding waypoints
can be adjusted.
2 Edit Waypoint Search Area P. 46
You can delete waypoints or edit the order of
waypoints in the destination list.
2 Editing My Destination P. 107
INSIGHT_KA-31TM8820.book 103 ページ ２０１１年８月９日　火曜日　午後３時３１分

105
XXChanging Your RouteXAdding Waypoints
Navigation
3.Select a waypoint category (e.g.,
Auto Service).
4. Select a waypoint subcategory
(e.g., GAS STATION ).
5. Select a place.
XThe waypoint is added to the
destination list.
XThe route is automatically
recalculated and displayed on
the map screen.
INSIGHT_KA-31TM8820.book 105 ページ ２０１１年８月９日　火曜日　午後３時３１分

106
XXChanging Your RouteXAdding Waypoints
Navigation
1.Select a new address or location.
2. Select ADD TO My Dest.
3. Select R or U to select a location
in the destination list. Select OK .
4. Select OK.
XThe route is automatically
recalculated and displayed on
the map screen.
■Adding Waypoints from the Calculate Route Screen
INSIGHT_KA-31TM8820.book 106 ページ ２０１１年８月９日　火曜日　午後３時３１分

107
XXChanging Your RouteXEditing My Destination
Navigation
Editing My Destination
HDEST button (when en route) X My Destination
Delete or edit the order of waypoints. 1.Select Edit.
XSelect Map to display the
destination and waypoints on
the map screen.
2. Select an item.
3. Select OK.
XThe route is automatically
recalculated and displayed on
the map screen.
The following items are available:
• Delete : Select a list item to delete.
• Edit Order : Select a list item to move, select R or U to select a new location.
INSIGHT_KA-31TM8820.book 107 ページ ２０１１年８月９日　火曜日　午後３時３１分