237
uuMaintenance Under the Hood uChanging the Engine Oil and Oil Filter
Maintenance
5. Remove the oil filter and dispose of the
remaining oil.
6. Check that the filter gasket is not stuck to
the engine contact surface.
u If it is stuck, you must detach it.
7. Wipe away dirt and dust adhering to the
contact surface of the engine block, and
install a new oil filter.
u Apply a light coat of new engine oil to
the oil filter gasket.
8. Put a new washer on the drain bolt, then
reinstall the drain bolt.
u Tightening torque:
29 lbf∙ft (39 N∙m, 4.0 kgf∙m)
9. Pour the recommended engine oil into the
engine.
u Engine oil change capacity (including
filter):
3.8 US qt (3.6 L)
10. Reinstall the engine oil fill cap securely and
start the engine.
11. Run the engine for a few minutes, and
then check that there is no leak from the
drain bolt or oil filter.
12. Stop the engine, wait for three minutes,
and then check the oil level on the
dipstick.
u If necessary, add more engine oil.1Changing the Engine Oil and Oil Filter
You will need a special wrench to replace the oil
filter. You can buy this wrench from a dealer.
When installing the new oil filter, follow the
instructions supplied with the oil filter.
Reinstall the engine oil fill cap. Start the engine. The
low oil pressure indicator should go off within five
seconds. If it does not, turn off the engine, and check
your work.
Oil Filter
311
uuSpecifications u
Information
■Brake Fluid
■ Automatic Transmission (CVT) Fluid
■ Manual Transmission Fluid
SpecifiedHonda Heavy Duty Brake Fluid DOT 3
SpecifiedHonda CVTF (continuously
variable transmission fluid)
Capacity Change 3.0 US qt (2.8 L)
SpecifiedHonda Manual Transmission
Fluid
Capacity Change1.5 US qt (1.4 L)
■Engine Oil
■ Engine Coolant
*1: Manual transmission models
*2: Automatic transmission (CVT) models
Recommended·Genuine Honda Motor Oil 0W-20·API Premium-grade 0W-20 detergent oil
Capacity Change 3.6 US qt (3.4 L)
Change
including
filter
3.8 US qt (3.6 L)
SpecifiedHonda Long-Life Antifreeze/Coolant Type2
Ratio 50/50 with distilled water
Capacity
1.17 US gal (4.42 L)*1
1.15 US gal (4.35 L)*2
(change including the remaining
0.116 US gal (0.44 L) in the reserve tank)
■ Tire
*3: Optional on Canadian models
*4: 205/45R17 tires
Regular
SizeP195/55R16 86V205/45R17 84W*3
Pressure
Front
30 psi
(210 kPa [2.1 kgf/cm2])32 psi
(220 kPa [2.2 kgf/cm2])*4
Rear
30 psi
(210 kPa [2.1 kgf/cm2])30 psi
(210 kPa [2.1 kgf/cm2])*4
Compact
Spare*
Size T135/80D15 99M
Pressure 60 psi
(420 kPa [4.2 kgf/cm
2])
Wheel SizeRegular16 x 6J17 x 6.5J*3
Compact
Spare*15 x 4T
* Not available on all models
