2014 HONDA ACCORD TOURING key

45
INSTRUMENT PANEL INDICATORS
Malfunction IndicatorsIf an indicator remains on\b there may be a problem; see your dealer
On/Off Indicators
Condition IndicatorsAction is needed by driver
PASSENGER AIRBAG OFF(next to display screen)
VSA OFF
ECON Mode on
Fog lights on Exterior lights on
Turn signals/hazards on
High beams on
Charging system
Low brake fluid AntiLock Brake System (ABS)
Malfunction lamp
(check engine light)
Tire Pressure Monitoring System
(TPMS) (blinks and stays on)
Vehicle Stability Assist
®(VSA)
Parking brake on:
Release Seat belt reminder:
Fasten seat belt(s)
Brake system
Adaptive Cruise Control (ACC)
Adaptive Cruise Control on
Smart Entry System
Low oil pressure
Supplemental Restraint System
(SRS)
Electric Power Steering (EPS)
Forward Collision Warning
(FCW)
Lane Departure Warning
(LDW)
Door/Trunk open:
Close door(s) / trunk Low tire pressure:
\bdd air
System message indicator:
Check MID
Low fuel:
Refill
Immobilizer (blinks):
Use other vehicle key
and see dealer
Briefly appear with each engine start. Red and orange indicators are most critical. Blue
and green indicators are used for general information. See your Owner’s Manual for
more information.
14 Accord 4D TRG_TOUR\AING_ATG_NEW STYLE \A7/10/2013 9\f38 AM \APage 4

1011
Door Locks
D e f a u l t L o c k S e t t i n g
The doors are preset to lock
when your vehicle reaches
about 1\f mph.
D e f a u l t U n l o c k S e t t i n g
All doors are set to unlock
when the driver’s door is
opened.
A U T O D O O R L O C K S
Program how and when the vehicle doors automatically lock and unlock.
Note: The driver’s and front passenger’s doors can be opened by pulling the inner
front door handle\b regardless of the setting. Changing the setting to “All Doors” is
useful for unlocking the rear doors when a front door handle is pulled.
Changing Settings
Follow the steps below to change your door settings. Make sure you are using the
key you want to change the settings for (Driver 1 or Driver 2) and the vehicle is in
ON mode. See your Owner’s Manual for complete setting options.
1. Press SETTINGS. Use theinterface dial to make and
enter selections.
2. Select Vehicle Settings.
3. Select Auto Door Lock or Auto Door Unlock.
4. Select from the options.
5. Press BACK to exit the menu.
S E T T I N G S F O R Y O U R V E H I C L E
Change different settings for many features in your vehicle. See your Owner’s Manual
for detailed information on settings and options.
Adjusting Vehicle Settings
Press SETTINGS to select the
settings menu. Use the
interface dial to make and
enter selections.
Choose from the available options:
Navi Settings
Change various settings for
navigation system routing.
Camera Settings
Change camera modes.
Vehicle Settings*
TPMS calibration\b meter setup\b
door setup\b and more.
System Settings
Adjust the display\b system
language\b and more. Phone Settings
Pair a phone\b change call and
text/email options\b and more.
Info Settings
Import wallpaper and select
clock type.
\budio Settings
Change sound options and
various settings for audio modes.
*The vehicle must be in Park (P) to access this menu.You can also change vehicle settings using the
multiinformation display (see page 6).
14 Accord 4D TRG_TOUR\AING_ATG_NEW STYLE \A7/10/2013 9\f38 AM \APage 7

1213
How It Works
O N E T O U C H T U R N S I G N A L
Use this quick and convenient method to signal a lane change.
• Lightly push the turn signal lever upor down for a threeblink sequence.
• For a continuous signal\b push the lever up or down until it locks into
place.
D R I V I N G P O S I T I O N M E M O R Y S Y S T E M ( D P M S )
How It Works
1. Turn on the vehicle. Make sure the shift lever is in Park (P).3. Press SET. You will hear a beep.
4. Press the memory buttoncorresponding to the remote
(1 or 2) you are using within 5
seconds. You will hear two beeps.
Note: Once set\b stored positions can be recalled by pressing one of the
memory buttons (1 or 2) on the door.
Store driver’s seat positions into memory for each corresponding keyless remote
transmitter (1 or 2).
2. Adjust the seat to your preferredposition.
How It Works
A U T O H E A D L I G H T S W I T H W I P E R I N T E G R A T I O N
For your convenience\b your vehicle’s headlights automatically turn on when the
windshield wipers operate.
Make sure your headlights are in
the AUTO position. Turn on your windshield wipers.
The headlights also turn on.
When you turn off the windshield
wipers\b the headlights turn off
shortly after.
14 Accord 4D TRG_TOUR\AING_ATG_NEW STYLE \A7/10/2013 9\f38 AM \APage 8