1. cR uise c ontRol
To set your cruise
control speed:
1. Press the ON control
up and release.
2. Accelerate to the
desired speed.
3. Press the SET control
up and release, then
take your foot off the
accelerator. After you
set your speed, you
can press SET +/- to
adjust cruise speed.
To disable, press the
OFF control down.
Ad Aptive cR uise
contR ol*
Allows you to set a
‘gap distance’ between
yourself and the vehicle
in front of you during
highway driving. When
your cruise control is
active, press ga P up
or down to select the
gap distance. Four gap
distance settings are
available. Refer to the
Cruise Control chapter
of your Owner’s Manual
for more information. 2.
p oweR tilt/
t elescope s teeRinG
c olumn*/
Adjust Able ped Als*
Two separate controls
allow you to tilt/telescope
the steering column, and
adjust the accelerator
and brake pedals to
the desired position.
3. left vehicle
infoRmA tion
displA y*
Use the left-hand, 5-way
controls located on your
steering wheel to scroll
through information
such as fuel usage, trip
odometer, trip timer and
other features. You can
also personalize various
vehicle settings to match
your preferences. Refer
to the Information
Displays chapter of your
Owner’s Manual for
more information.
4. seR vice enGine
soon liGht
Illuminates briefly
when the ignition is
turned on. If it remains on or is blinking after the
engine is started, the
On-Board Diagnostics
(OBD-II) system has
detected a malfunction.
Drive in a moderate
fashion and contact
your authorized dealer
as soon as possible.
5. Audio contR ols
Press VOl +/- to
increase/decrease
volume levels. Press
SEEK
to access
the next/previous radio
station preset, CD track
or preset satellite
radio channel*.
Press to
access SYNC®
phone features.
Press to access
voice recognition.
6. RiGht vehicle
infoRmA tion
displA y*
Displays information
about Entertainment,
Phone and Navigation*.
Use the right-hand,
5-way controls located
on your steering wheel to scroll through,
highlight and make
minor adjustments
within a selected menu.
Refer to the
MyFord
®
Touch chapter in your
Owner’s Manual for
more information.
7. p ush-button st ARt*
Allows you to start your
vehicle by pressing
the ENgiNE ST arT/
STOP button, while
fully pressing down on
the brake pedal. Press
the button again to
turn the engine off.
Note: Your intelligent
access key must be inside
the vehicle for the ignition
to start.
8. hA zARd contR ol
INSTRUMENT
PaNEl
2
3
7
4
6
2014 Taurus /Quick RefeRence Guide /5
4/ 2014 Taurus /Quick RefeRence Guide
*if equipped
5
1
8
