*if equipped*if eQuiPPed18
AdVAnceTrA c®
WiTH rOLL
STABiLiTY
cOnTrOL™ (rSc
®)*
The system helps you keep
control of your vehicle when
on a slippery surface. The
electronic stability control
portion of the system helps
your vehicle avoid skids and
lateral slides. Roll stability
control helps your vehicle
avoid a vehicle rollover. The
traction control system helps
your vehicle avoid drive wheel
spin and a loss of traction. Press the control to turn portions of the system off.
Refer to your Stability Control chapter in your Owner’s Manual for more details.
eLecTrOnic LOcking differenTiAL (eLd )*
With the ELD engaged, the rear axle temporarily locks, allowing both rear
wheels to turn at the same speed. The function helps to provide additional
traction on slippery or off-road surfaces.
T O A cTiVATe
• In 4x4 vehicles with an electronic shift 4WD system, pull the 4WD control
knob toward you.
• In 2WD vehicles and vehicles equipped with a manual shift 4WD system, turn
the ELD control knob from OFF to ON.
• The indicator light
appears in the information display when ELD is active.
Note: ELD should not be used on dry surfaces.
reAr VieW
cAMerA SYSTeM*
Located under the Ford oval badge
on the tailgate, this camera provides
a video image of the area behind
the vehicle. During operation, lines
appear in the display which represent
your vehicle’s path and proximity
to objects behind the vehicle. The
display will automatically appear in
the navigation system screen* or in
the auto dimming rearview mirror
whenever the vehicle is in R (Reverse)
and uses colors (green, yellow and
red) to alert you of your proximity
to objects.
Note: Visibility aids do not replace
the need to watch where the vehicle is moving. Refer to your Owner’s Manual for
safety information, more details and limitations.
One-T OucH uP Or dOWn (frOnT WindOWS)*
This feature automatically opens or closes the window. Press or lift the switch
fully and release it. The window will open or close. Press or lift the switch again
to stop the window.
Note: The window may be disabled for up to five minutes if it is cycled up and
down repeatedly. This helps prevent damage to the motor. Normal operation
will resume once the motor cools.
funcTion
reVerSe SenSing S YSTeM*
The sensing system, only active when the transmission is in
R (Reverse), warns the driver of obstacles within a certain range of
the rear bumper area. It sounds a warning tone if there is an object
behind the vehicle. The tone will sound continuously when the
object is less than 12 inches (30 centimeters) away. The system is
not effective when the vehicle is traveling above 3 mph (5 km/h)
and may not detect certain angular or moving objects.
Note: Visibility aids do not replace the need to watch where
the vehicle is moving. Refer to your Owner’s Manual for safety
information, more details and limitations.
19*if e QuiPPed