Page 304 of 406
Items CapacityFord part name or
equivalentFord part number /
Ford specification
Engine coolant
8
(2.0L Ecoboost
engines)
8.9 qt (8.4L)
Motorcraft Orange
Antifreeze/Coolant
PredilutedVC-3DIL-B (US)
CVC-3DIL-B (Canada) /
WSS-M97B44-D2 (3.5L V6/3.7L
V6 engines)
11.5 qt (10.9L)
(3.5L V6 EcoBoost
engine)
11.8 qt (11.2L)
Windshield washer
fluidFill as requiredMotorcraft Premium
Windshield Washer
Concentrates with
Bitterant (US)
Premium Quality
Windshield Washer Fluid
(Canada)ZC-32- B2 (US)
CXC-37-(A, B, D, and F)
(Canada) /
WSB-M8B16-A2/- -
Fuel tankSedan
19.0 gal (72L)
Utility
18.6 gal (70L)——
A/C Refrigerant
(With auxiliary
A/C)
9
Utility 3.7L TiVCT
2.31 lb (1.04 kg)
3.5L GTDI
2.94 lb (1.33 kg)Motorcraft R-134a
RefrigerantYN-19 (US)
CYN-16-R (Canada) /
WSH-M17B19-A
Capacities and Specifications303
2014 Police(pol)
Owners Guide gf, 3rd Printing, September 2013
USA(fus)
Page 305 of 406
Items CapacityFord part name or
equivalentFord part number /
Ford specification
A/C Refrigerant
(Without auxiliary
A/C)
9
Sedan
2.0L EcoBoost
1.62 lb (0.74 kg)
Utility 3.5L GTDI
2.13 lb (0.96 kg)
Sedan 3.5L & 3.7L
TiVCT
1.81 lb (0.82 kg)
Utility 3.7L TiVCT
1.62 lb (0.74 kg)Motorcraft R134a
RefrigerantYN-19 (US)
CYN-16-R (Canada) /
WSH-M17B19-A
A/C Refrigerant
Compressor Oil
(With auxiliary
A/C)
9
Utility 3.7L with
auxiliary A/C
7.94 fl oz (235 ml)
Utility 3.5L GTDI
7.27 fl oz (215 ml)
Motorcraft PAG
Refrigerant
Compressor OilYN-12-D /
WSH-M1C231-B
A/C Refrigerant
Compressor Oil
(Without auxiliary
A/C)
9
Sedan 2.0L
EcoBoost, 3.5L
GTDI, 3.5L & 3.7L
TiVCT, and Utility
3.7L without
auxiliary A/C
5.24 fl oz (155 ml)
Utility 3.5L GTDI
5.58 fl oz (165 ml)
304Capacities and Specifications
2014 Police(pol)
Owners Guide gf, 3rd Printing, September 2013
USA(fus)
Page 306 of 406
Items CapacityFord part name or
equivalentFord part number /
Ford specification
1Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Brake Fluid or
equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may
cause degraded brake performance and not meet the Ford performance standards. Keep brake
fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may
result in brake system damage and possible failure.2Approximate dry fill capacity. Actual amount may vary during fluid changes.3Automatic transmissions that require MERCON LV should only use MERCON LV fluid. Refer to
scheduled maintenance informationto determine the correct service interval. Use of any fluid
other than the recommended fluid may cause transmission damage.4See your authorized dealer for fluid level checking or filling.5The design of your engine allows for the use of Motorcraft engine oils or equivalent oils that meet
Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that
meets API SN requirements and displays the API Certification Mark for gasoline engines.6Do not use API S category oils labeled as SN, SM, SL or lower category unless the label also
displays the API certification mark. These oils do not meet the requirements of the engine and
emission system.7Do not use supplemental engine oil additives in your engine. They are unnecessary and could
lead to engine damage not covered by your Ford warranty.8Add the coolant type originally equipped in your vehicle.9See warning below:
WARNING:The air conditioning refrigerant system contains refrigerant R–134a under high
pressure. Opening and air conditioning refrigerant system can cause personal injury. Only
qualified personnel should service the air conditioning refrigerant system.
Capacities and Specifications305
2014 Police(pol)
Owners Guide gf, 3rd Printing, September 2013
USA(fus)
