1
2
3
4
5
6
7
8
CR
uiSE C ontRoL
To Set y our Cruise Control Speed
1.
Press and release on.
2. Accelerate to the desired speed.
3. Press and release SEt+, then take your foot off
the accelerator.
After you set your speed, you can adjust your
cruise speed by pressing and releasing SEt +/- .
To disable, press and release oFF.
LEFt VEhiCLE inF oRMAtion DiSPLA y
Provides specific information about various
systems on your vehicle including the status of your
high-voltage battery and the other unique features of
your electric vehicle.
Use the left-hand, 5-way controls located on the
steering wheel to choose and confirm settings and
messages. Refer to the Instrument Cluster chapter of
your Owner’s Manual for more information.
SERViCE VEhiCLE Soon LiGht
Illuminates when a powertrain or high-voltage
charge system fault has been detected. If the
indicator stays on or continues to come on, contact
your authorized dealer as soon as possible.
tiL t/tELESC oPE StEERinG CoL uMn
Unlock the steering wheel by pulling the lever down.
Adjust the steering wheel to the desired position.
Push the lever up to lock the steering wheel in place .
RiGht VEhiCLE inFoRMAtion DiSPLA y
Displays information about Entertainment, Phone,
Navigation* and Surplus. Use the right hand 5-way
controls located on your steering wheel to scroll
through, highlight and make minor adjustments
within a selected menu. Refer to the MyFord Touch
®
chapter in your Owner’s Manual for
more information.
MEDiA StEERinG whEEL ContR oLS
Press + to increase or – to decrease volume levels.
Pull toward you to access voice recognition.
Press to answer an incoming phone call.
Press to end a phone call and exit phone mode .
PuSh Button St ARt–READ y to DRiVE
note: Your intelligent access key must be inside the vehicle
to put the vehicle in “Ready to Drive” mode . The keyless
warning alert sounds when you open the driver’s door and
your vehicle is in RUN.
Allows you to go into “Ready to Drive” mode by
pressing the P owER StAR t/S toP button while
fully pressing down on the brake pedal. A green
“Ready to Drive” indicator light
will appear in the
instrument cluster after you start the vehicle. This
lets you know that the vehicle is turned on and ready
for driving. Press the P owER StAR t/S toP button
again to turn the vehicle off .
hAzARD ContR oL–unL oCK/LoCK
1
3
4
6
8
Instrument Panel
2
7
5
*if equipped67
