SYNC
®*
pairing y our phone
With sync
In order to use many of the features of
SYNC, such as making a phone call,
receiving a text or using SYNC services,
you must first connect or pair your phone
with SYNC.
To pair your phone for the first time:
1. Make sure that your vehicle is in
(P) park and your ignition and radio
are turned on.
2. Press the phone button, when the
display indicates No Phone Found
press OK.
3. When Add Bluetooth Device?
appears in the display press OK.
4. When Find SYNC appears in the
display press OK. When prompted on
your phone’s display, enter the PIN
provided by SYNC into your phone.
5. The display will indicate when the
pairing is successful.
GettInG S taRted
wIth YOUR SYnC SYS tem
SYNC is a hands-free, voice recognition system used
for entertainment, information and communication.
SYNC….Say the word.
Before you get started:
1. Set up your owner account at SyncMyRide.com (U.S.) or
SyncMyRide.ca (Canada). Register by following the on-screen
instructions. After registering, you can see what complimentary
services you are eligible for.
2. SYNC uses a wireless connection called
Bluetooth® to
communicate with your phone. Turn Bluetooth mode on in your
phone’s menu options. This lets your phone find SYNC. If you
need more details on setting up your phone with SYNC, visit
SyncMyRide.com (U.S.) or SyncMyRide.ca (Canada) or your phone
manufacturer’s website.
6 7
Note: the system may prompt you to:
• Set your phone as the primary/favorite
(the primary phone will receive
messages and voicemails).
• Download your phone book
(this is required to use the full
set of voice commands).
• Turn on 911 Assist
®.
Tips:
• Make sure you accept SYNC’s
request to access your phone.
• To pair subsequent phones, please
refer to Pairing Subsequent Phones
in the SYNC chapter of your
Owner’s Manual.
• If you are experiencing pairing
problems, try performing a clean
pairing by: 1) deleting your phone
from SYNC; 2) deleting the SYNC
connection from your phone; and
3) repeating the Pairing Your
Phone with SYNC process.
using my phone With sync
Note: You must download your phone
book to make phone calls with voice
commands by name.
Making a phone call:
Use SYNC to make a phone call to
anyone in your phone book by pressing
the voice button
and when
prompted, say any of the following
voice commands:
Call
Call at work
Call on mobile or cell
Call at home
For example, you could say Call Jake
Smith at home. SYNC repeats the
command back to you and dials
the number.
Note: You can also make phone calls
by giving the voice command Dial, then
verbally say the phone number. Answering incoming calls:
Whenever you have an incoming
call, you will be able to see the name
and number of the person calling in
your display. Press the phone button
to answer an incoming call. You
can hang up at any time by pressing
and holding the phone button
.
Do not disturb mode:
This feature blocks incoming calls and
text messages and saves them for later.
You still have access to outgoing calls
when this feature is active. Say the voice
command, Do not disturb on to enable
and Do not disturb off to disable.
Note: You can choose from privacy
mode (can listen and talk only by
phone) or open mode (listen/talk
by the vehicle) via the display.
* If equipped.
