Page 6 of 17
Downloaded from www.Manualslib.com manuals search engine INFORMATION DISPLAY
CONTROL
Vehicles with voice control
Left-hand drive
A.Information display
B.Information and entertainment display
Right-hand drive
A.Information and entertainment display
B.Information display
Vehicles without voice control
A.Information display
B.Audio
WINDSHIELD WIPERS
Windshield wipers
Single wipeA
Intermittent wipe or autowipersB
Normal wipeC
High speed wipeD
Intermittent wipe
Short wipe intervalA
Intermittent wipeB
Long wipe intervalC
The rotary control can be used to adjust theintermittent wipe interval.
4C-MAX (CB7) Vehicles Built From: 10-09-2012, Vehicles Built Up To: 31-12-2014, CG3558en enGBR, Edition date: 03/2014, Second Printing
Page 7 of 17

Downloaded from www.Manualslib.com manuals search engine AUTOWIPERS
WARNING
For all warnings and cautions, referto your Owner's Manual.
High sensitivityA
OnB
Low sensitivityC
The wipers will function when moisture isdetected on the windshield. The rain sensorwill continue to monitor the amount ofmoisture on the windshield and adjust thespeed of the wipers automatically.
Use the rotary control to adjust thesensitivity of the rain sensor. With lowsensitivity, the wipers will operate when thesensor detects a large amount of moistureon the windshield. With high sensitivity, thewipers will operate when the sensor detectsa small amount of moisture on thewindshield.
REAR WINDOW WIPER AND
WASHERS
Intermittent wipeA
Low speed wipeB
Rear window washer
CHANGING THE WIPER BLADES
Windshield wiper blades
WARNINGS
Set the windshield wipers in theservice position to change the wiperblades.
You can use the service position inwinter to provide easier access to thewiper blades for freeing them fromsnow and ice. The windshield wipers willreturn to their normal position as soon asyou switch on the ignition so make sure thatthe outside of the windshield is free fromsnow and ice before you switch on theignition.
5C-MAX (CB7) Vehicles Built From: 10-09-2012, Vehicles Built Up To: 31-12-2014, CG3558en enGBR, Edition date: 03/2014, Second Printing
Page 10 of 17
Downloaded from www.Manualslib.com manuals search engine Note:As the seats slide rearwards, they alsomove slightly inboard.
4.Pull the lever on the outer front edge ofthe outboard seats and push the seatsrearwards.
To return the seats to the forward position,pull the lever and slide the seats forwards.
To return the center seat to its originalposition, pull the lever on the underside ofthe seat. Fold the center seat forwards andpush it back down fully until it engages.
Install the luggage cover.
Second row seats - Grand C-MAX
Stowing the center seat
WARNING
Make sure the center seat back is inthe upright position when the vehicleis moving.
1.Pull the lever on the back of the centerseat and push the seatback down untilit locks.
2.Pull the strap and lift the right-handseat cushion.
8C-MAX (CB7) Vehicles Built From: 10-09-2012, Vehicles Built Up To: 31-12-2014, CG3558en enGBR, Edition date: 03/2014, Second Printing
Page 11 of 17

Downloaded from www.Manualslib.com manuals search engine 3.Pull the strap to fold the center seatover into the right-hand seat base.
4.Fold the right-hand seat cushion down.
Note:You can use the space between theoutboard seats to access the third row seatswhen the center seat has been stowed.
Folding the seats forward
WARNING
Do not use the third row seats whenthe second row seats have beenfolded forward.
Note:The center seat must be stowed intothe right-hand seat base before theright-hand seat is folded.
1.Pull the strap and lift the cushion.
2.Lift the lever and push the seatbackdown until it locks.
CLOCK
You can adjust the date and time using theinformation display menu. Use the arrowbuttons on your steering wheel to accessthe menu and make the necessary changes.
KEYLESS STARTING
Ignition On
Press the button once without your foot onthe brake or clutch pedal.
Note:The keyless starting system may notfunction if the passive key is close to metalobjects or electronic devices such as cellphones.
Starting with Manual Transmission
1.Fully depress the clutch pedal.
2.Press the start button.
Note:Releasing the clutch pedal duringengine start will stop the engine cranking andreturn to ignition on.
9C-MAX (CB7) Vehicles Built From: 10-09-2012, Vehicles Built Up To: 31-12-2014, CG3558en enGBR, Edition date: 03/2014, Second Printing