Downloaded from www.Manualslib.com manuals search engine USING ACTIVE PARK ASSIST
Active park assist will not align the vehiclecorrectly if:
•a spare tire, or a tire worn significantlymore than the other tires is used
•the factory installed tire size is not usedon the vehicle
•the tires skid
•you allow the vehicle to roll.
•the weather conditions are poor (heavyrain, snow, fog, etc).
Move forwards at a maximum speed of 30kph (18 mph). Press the active park assistcontrol switch. Use the direction indicatorlever to select searching either to theleft-hand side or right-hand side of thevehicle.
Drive slowly to position A, then follow thesystem instructions.
Move the vehicle backwards cautiouslyusing the accelerator and brake pedals tocontrol the vehicle. Stop the vehicle whenyou hear a continuous tone.
12C-MAX (CB7) Vehicles Built From: 10-09-2012, Vehicles Built Up To: 31-12-2014, CG3558en enGBR, Edition date: 03/2014, Second Printing
Downloaded from www.Manualslib.com manuals search engine TIRE PRESSURE MONITORING
SYSTEM
The Deflation Detection System will alertyou if there is a change of air pressure in anytire. It does this by using the ABS sensorsto detect the rolling circumference of thewheels. When the circumference changes,this indicates low pressure in a tire, awarning message is displayed in theinformation display and the messageindicator will illuminate.
If a low pressure warning message isdisplayed in the information display, checkthe tire pressures as soon as possible andinflate them to the recommended pressure.
If this happens frequently, have the causedetermined and rectified as soon aspossible.
Apart from a too low tire pressure or adamaged tire, the following situations canaffect the rolling circumference:
•Vehicle load is uneven.
•When using a trailer or traveling up anddown an incline.
•Using snow chains.
•Driving on soft surfaces such as snowor mud.
Note:The system will still function correctly,but there may be an increased detectiontime.
System reset
Note:Do not reset the system when thevehicle is moving.
Note:You should reset the system followingany adjustment to the tire pressures or anychanging of tires.
Note:Turn the ignition on.
1.Using the information display control,navigate to Settings > Driver assist> Deflation detection.
2.Press and hold the OK button untilconfirmation appears.
14C-MAX (CB7) Vehicles Built From: 10-09-2012, Vehicles Built Up To: 31-12-2014, CG3558en enGBR, Edition date: 03/2014, Second Printing
