2014 FORD B MAX start stop button

Downloaded from www.Manualslib.com manuals search engine Air vents.A
Direction indicators. High beam.B
Instrument cluster.C
Start button.D
Wiper lever.E
Information and entertainmentdisplay.F
Audio unit.G
Power door lock button.H
Hazard warning flasher switch.I
Climate controls. Heated rearwindow switch. Heatedwindshield switch.
J
Parking aid switch.K
Start-stop switch.L
Card holder or airbag warninglamp.M
Ignition switch.N
Cruise control switches.O
Horn.P
Driver knee airbag.Q
Steering wheel adjustment.R
Audio control. Voice control.S
Hood release lever.T
Lighting control. Front fog lamps.Rear fog lamp. Instrumentlighting dimmer.
U
FASTENING THE SAFETY
BELTS
Pull the belt out steadily. Hold the tongueand let it retract completely and smoothlyto its stowed position.
MYKEY™
The system allows you to program keyswith restricted driving modes to promotegood driving habits. You can use all but oneof the keys programmed to your vehiclewith these restricted modes.
Any keys that have not been programmedare referred to as an administrator key oradmin key. These can be used to:
•create a MyKey
•program optional MyKey settings
•clear all MyKey features.
When you have programmed a MyKey, youcan access the following information usingthe information display:
•How many admin keys and MyKeys areprogrammed to your vehicle.
•The total distance your vehicle hastraveled using a MyKey.
Note:Switch the ignition on to use thesystem.
2B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 03-05-2015, CG3574en enGBR, Edition date: 02/2014, Second Printing

Downloaded from www.Manualslib.com manuals search engine MANUAL SEATS
Moving the Seat Backward andForward
Adjusting the Lumbar Support
Adjusting the Height of the Driver’sSeat
Recline Adjustment
STARTING AND STOPPING THE
ENGINE - 1.0L ECOBOOST™
Our range of three-cylinder engines sounddifferent to the four-cylinder engine thatyou may have become used to. It may takea little time for you to get used to thisdifferent sound.
STARTING THE ENGINE
Vehicles With ManualTransmission
Note:Do not touch the accelerator pedal.
Note:Releasing the clutch pedal while theengine is starting will stop the enginecranking and return to ignition on.
1.Fully depress the clutch pedal.
Note:Vehicles with push button start: Brieflypress the button.
2.Start the engine.
Vehicles With AutomaticTransmission
Note:Do not touch the accelerator pedal.
Note:Releasing the brake pedal while theengine is starting will stop the enginecranking and return to ignition on.
1.Move the transmission selector lever toposition P or N.
2.Fully depress the brake pedal.
9B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 03-05-2015, CG3574en enGBR, Edition date: 02/2014, Second Printing

Downloaded from www.Manualslib.com manuals search engine Note:Vehicles with push button start: Brieflypress the button.
3.Start the engine.
Vehicles With a Diesel Engine
Note:Engine cranking will not commenceuntil the engine glow plug indicator hasextinguished. This may take several secondsin extremely cold conditions.
Stopping the Engine When YourVehicle is Moving - Vehicles WithPush Button Start
1.Press and hold the button for at leastone second or press it three times withintwo seconds.
2.Move the transmission selector lever toposition N and use the brakes to bringyour vehicle to a safe stop.
3.When your vehicle has stopped, movethe transmission selector lever toposition P or N and switch the ignitionoff.
AUTO-START-STOP
Using Start-Stop
Note:The system is on by default. To switchthe system off, press the switch in theinstrument panel. The system will only beswitched off for the current ignition cycle. Toturn it on, press the switch again.
To stop the engine
1.Stop your vehicle.
2.Move the gear lever to the neutralposition.
3.Release the clutch pedal.
4.Release the accelerator pedal.
The system may not shut down the engineunder certain conditions, for example:
•To maintain the interior climate.
•Low battery voltage.
•The outside temperature is too low ortoo high.
•The driver's door has been opened.
•Low engine operating temperature.
•Low brake system vacuum.
•If a road speed of 3 mph (5 km/h) hasnot been exceeded.
•The driver's safety belt has not beenfastened.
To re-start the engine
Note:The gear lever must be in the neutralposition.
Depress the clutch pedal.
The system may automatically restart theengine under certain conditions, forexample:
•Low battery voltage.
•To maintain the interior climate.
REFUELING
1.Press the flap to open it. Open the flapfully until it engages.
10B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 03-05-2015, CG3574en enGBR, Edition date: 02/2014, Second Printing