SYSTEM RESET function
This function is used to restore all settings to the
factory values.
The options are:
❒NO: no restore intervention;
❒YES: the default parameters will be restored.
During this operation, the text “Resetting” appears
on the display. At the end of the operation, the
source does not change and the previous situation
will be displayed.
PHONE SET-UP
If a hands-free kit is installed on the car, when there
is an incoming phone call the radio audio will be
connected to the telephone output. The incoming
telephone sound always arrives at a fixed volume, but
it can be adjusted during the conversation using the
ON/OFF button/knob.
The fixed telephone audio volume can be adjusted
using the "SPEECH VOLUME" function in the Menu.
The text “PHONE” appears on the display during the
telephone audio deactivation.ANTI-THEFT PROTECTION
The radio is equipped with an anti-theft protection
system based on the exchange of information
between the radio and the electronic control unit
(Body Computer) on the car.
This system guarantees maximum safety and prevents
the secret code from being entered each time the
radio power supply is disconnected.
If the check has a positive outcome, the radio will
start to function, whereas if the comparison codes
are not the same or if the electronic control unit
(Body Computer) is replaced, the device will ask the
user to enter the secret code according to the
procedure described in the paragraph below.
Entering the secret code
When the radio is switched on, if the code is
requested, the display will show "Radio code" for
about 2 seconds followed by four dashes "----".
The code is made up of four numbers from 1 to 6,
each corresponding to one of the dashes.
To enter the first digit of the code, press the
corresponding button of the pre-selected stations
(from 1 to 6). Enter the other code digits in the same
way.
If the four digits are not entered within 20 seconds,
the display will show "Enter code----".Ifthis
occurs, it is not considered an incorrect code entry.
After entering the fourth digit (within 20 seconds),
the car radio will start to work.
252
SOUND-SYSTEM
LOADING/EJECTING A CD
To load the CD, insert it gently into the slot to
activate the motorised loading system, which will
position it correctly.
The CD can be loaded with radio off and the ignition
key turned to MAR: in this case the radio will remain
off. When the radio is turned on, the last source
listened to before being switched off will be
activated.
When a CD is inserted the display will show the
symbol "CD-IN" and the text "CD Reading". They
will remain displayed for the entire time required for
the radio to read the CD tracks. When this time has
elapsed the radio automatically starts playing the first
track.
Press the
button (EJECT) with the radio on to
activate the motorised ejection of the CD. After
ejection, the last audio source listened to before
playing the CD will be heard.
WARNING
Do not inadvertently press the eject
button when inser ting a CD.If the CD is not removed from the radio, it will
automatically be reloaded about 20 seconds later and
the Tuner mode will be activated (Radio).
The CD cannot be ejected if the car radio is off.
If the ejected CD is reloaded without having removed
it completely from the slot, the radio will not switch
to the CD source.
Possible error messages
If the CD loaded cannot be read (e.g. a CD ROM has
been inserted or the CD is inserted the wrong way
round or there is a reading error) the display will
show the words "CD error".
The CD will then be ejected and the audio source
activated prior to the CD mode selection will be
heard.
With an external audio source activated ("TA",
"ALARM" and "Phone"), the CD that cannot be read
will not be ejected until these functions have ended.
At the end, with the CD mode activated, the display
will show the text "CD error" for a few seconds and
then the CD will be ejected.
If the CD player overheats CD playback could be
temporarily interrupted. The radio will automatically
switch to the Radio (Tuner) mode and the display will
show “CD hot” and then “CD error”.
258
SOUND-SYSTEM
