2014 FIAT PANDA CD player

Note
If the TA function is activated with an audio source
other than Tuner (Radio) (CD, MP3, telephone or
Mute/Pause), the radio can carry out an automatic
search and therefore it is possible, when reactivating
the Tuner (Radio) source, that the frequency tuned
into is different from the one previously set.
With the TA function, it is possible to:
❒search only for RDS stations that broadcast in FM
and are enabled to broadcast traffic information;
❒receive traffic information even when the CD
player is in operation;
❒receive traffic information at a minimum preset
volume even with the radio volume off.Note
In some countries there are radio stations that, even
with the TP function activated, do not transmit traffic
information (the icon "TP" appears on the display).
If the radio is tuned to a station in the AM band,
when TA is activated it will tune to the last selected
station in the FM1 band.
The volume at which the traffic news is transmitted
depends on the listening volume:
❒listening volume below 5: traffic news volume 5
(fixed value);
❒listening volume above 5: traffic news volume equal
to listening volume +1.
If the volume is changed during traffic news, the level
will not be shown on the display; the new level will
only be maintained during the news.
While traffic information is being received, “TRAFFIC
INFORMATION” will appear on the display.
The TA function can be interrupted by pressing any
button on the car radio.
248
SOUND-SYSTEM

NOTES
❒Using the Menu it is only possible to adjust the
activation/deactivation of the function and not the
minimum or maximum volume value.
❒If the "TA" or "TEL" functions or an external audio
source are activated when the radio is turned on,
the radio will come on at the volume set for these
sources. The volume can be adjusted between the
minimum and the maximum level, by deactivating
the external audio source.
❒If the battery charge is low, it will not be possible
to adjust the volume between the minimum and
maximum levels.
SPEECH VOLUME function
(telephone volume setting)
By turning the
(ON/OFF) button/knob or pressing
the
/
buttons, this function allows the volume to
be adjusted (settings from 1 to 40) or to be excluded
(OFF setting) for the Telephone andBlue&Me™
(except the Media Player function).
The display shows the current function status:
❒"Speech Off": function deactivated.
❒“Speech volume 23”: function active with volume
setting 23.AUX OFFSET function
(alignment of the portable device volume with
that of the other sources)
This function enables the alignment of the volume of
the AUX source, depending on its own portable
player, with that of the other sources.
To activate the function, press the MENU button and
select “AUX offset”.
Press the buttons
or
to decrease or increase the
volume value (set from–6to+6).
RADIO OFF function
(on and off mode)
This function is used to set the radio turning off
mode to one of two different settings. To turn the
function on, use the
or
buttons.
The chosen mode appears on the display:
❒"00 MIN": the radio turns off automatically in
connection with the ignition key; the radio turns
off automatically as soon as the key is turned to
the STOP position;
❒"20 MIN": the radio turns off independently of the
ignition key; the radio remains switched on for a
maximum period of 20 minutes after the key has
been turned to the STOP position.
251
SOUND-SYSTEM

RADIO (TUNER)INTRODUCTION
When the radio is switched on, the last function
selected before it was switched off is activated:
Radio, CD, CD MP3 or Media Player (only with
Blue&Me™) or AUX (only withBlue&Me™, for
versions/markets, where provided).
To select the Radio function when another audio
source is being listened to, briefly press the FM AS or
AM buttons depending on the desired band.
Once the Radio mode has been activated, the display
will show the name (RDS stations only) and the
frequency of the selected radio station, the frequency
band selected (e.g. FM1) and the preselect button
number (e.g. P1).FREQUENCY BAND SELECTION
With the Radio mode active, press the FM AS or AM
button briefly and repeatedly to select the desired
reception band.
Each time the button is pressed the following bands
are selected cyclically:
❒By pressing the FM AS button: “FM1”, “FM2” or
“FMA”;
❒By pressing the AM button: “MW1, MW2”.
Each band is highlighted by the name in the display.
The last station selected on the respective frequency
band will be tuned into.
The FM band is divided into sections: FM1, FM2 or
"FMA"; the FMA reception band is reserved for
broadcasters stored automatically using the
Autostore function.
254
SOUND-SYSTEM

EON FUNCTION (Enhanced Other Network)
In some countries, there are circuits that group
multiple broadcasters that transmit traffic
information together. In this case, the programme of
the station that is being listened to will be
temporarily interrupted to:
❒receive traffic alerts (only with the TA function
activated);
❒listen to regional transmissions each time these are
broadcast by one of the broadcasters on the same
circuit.
STEREOPHONIC BROADCASTERS
If the incoming signal is weak, the reproduction is
automatically switched from Stereo to Mono.
CD PLAYERINTRODUCTION
This section describes the variants regarding the
operation of the CD player: as far as the operation of
the radio is concerned, refer to the description in the
"Functions and Adjustments" chapter.
SELECTING THE CD PLAYER
To activate the CD player built into the equipment,
proceed as follows:
❒insert a CD with the equipment switched on: the
first track will start to play;
or
❒if a CD has already been loaded, turn on the car
radio and then briefly press the CD button to
select the “CD” operating mode: the last track
listened to will start to play.
It is advisable to use original CDs to ensure optimum
playback. If CD-R/RWs are used, we recommend
using good quality media that are burnt at the
slowest speed possible.
257
SOUND-SYSTEM

LOADING/EJECTING A CD
To load the CD, insert it gently into the slot to
activate the motorised loading system, which will
position it correctly.
The CD can be loaded with radio off and the ignition
key turned to MAR: in this case the radio will remain
off. When the radio is turned on, the last source
listened to before being switched off will be
activated.
When a CD is inserted the display will show the
symbol "CD-IN" and the text "CD Reading". They
will remain displayed for the entire time required for
the radio to read the CD tracks. When this time has
elapsed the radio automatically starts playing the first
track.
Press the
button (EJECT) with the radio on to
activate the motorised ejection of the CD. After
ejection, the last audio source listened to before
playing the CD will be heard.
WARNING
Do not inadvertently press the eject
button when inser ting a CD.If the CD is not removed from the radio, it will
automatically be reloaded about 20 seconds later and
the Tuner mode will be activated (Radio).
The CD cannot be ejected if the car radio is off.
If the ejected CD is reloaded without having removed
it completely from the slot, the radio will not switch
to the CD source.
Possible error messages
If the CD loaded cannot be read (e.g. a CD ROM has
been inserted or the CD is inserted the wrong way
round or there is a reading error) the display will
show the words "CD error".
The CD will then be ejected and the audio source
activated prior to the CD mode selection will be
heard.
With an external audio source activated ("TA",
"ALARM" and "Phone"), the CD that cannot be read
will not be ejected until these functions have ended.
At the end, with the CD mode activated, the display
will show the text "CD error" for a few seconds and
then the CD will be ejected.
If the CD player overheats CD playback could be
temporarily interrupted. The radio will automatically
switch to the Radio (Tuner) mode and the display will
show “CD hot” and then “CD error”.
258
SOUND-SYSTEM

DISPLAY INFORMATION
When the CD player is in operation, information
appears on the display with the following meanings:
❒"CD Track 5": indicates the number of the CD
track;
❒"03.42": indicates the time elapsed since the start
of the track (if the relevant Menu function is
activated).
TRACK SELECTION (forward/backward)
Briefly press the
button to play the previous CD
track and the
button to play the next track.
The tracks are selected cyclically: the first track is
selected after the last track and vice versa.
If the track has been played for more than 3 seconds,
pressing thebutton will cause the track to be
started again from the beginning.
In this case, if you want to play the previous track,
press the button twice consecutively.
TRACK FAST FORWARD/REWIND
Keep the
button pressed down to fast forward the
selected track and hold the
button down to fast
rewind the track.
The fast forward/rewind will stop once the button is
released.PAUSE FUNCTION
To pause the CD player, press the
button. The text
“CD Pause” appears on the display.
To resume listening to the track, press the
button
again. If another audio source is selected, the pause
function is turned off.
259
SOUND-SYSTEM

CD MP3 PLAYERINTRODUCTION
This chapter only describes the variants regarding the
operation of the CD MP3 player: as far as the
operation of the radio is concerned, refer to the
description in chapters "Radio" and "CD MP3 Player".
NOTE MPEG Layer-3 audio decoding technology
licensed from Fraunhofer IIS and Thomson
multimedia.
MP3 MODE
In addition to playing regular audio CDs, the radio is
also able to play CD-ROMs on which audio files have
been stored using the MP3 compression format. The
radio operates as described in the "CD Player"
chapter when an ordinary audio CD is inserted.
To guarantee optimal playback quality it is advisable
to use good quality CDs mastered at the lowest
speed possible.
The files on an MP3 CD are structured by folder,
creating lists of all the folders containing MP3 tracks
(folders and subfolders are all displayed on the same
level); the folders that do not contain MP3 tracks
cannot be selected.
The operating conditions and specifications for
playing MP3 files are as follows:
❒the CD-ROMs used should be burnt according to
the ISO 9660 standard;❒the music files must have an ".mp3" extension: files
with a different extension cannot be played;
❒the following sampling frequencies can be played:
44.1 kHz, stereo (96 to 320 kbit) - 22.05 kHz,
mono or stereo (32 to 80 kbit);
❒tracks with a variable bit-rate can be reproduced.
Note
The names of tracks must not contain the following
characters: spaces, ' (apostrophes), ( and ) (open and
close brackets). During the burning of a MP3 CD,
make sure that the names of the files do not contain
these characters; if they do, the radio will not be able
to play the tracks involved.
260
SOUND-SYSTEM

SELECTING NEXT/PREVIOUS FOLDER
Press the
button to select one of the next folders
or press the
button to select a previous folder.
The display will show the number and the name of
the folder (e.g. "DIR 2 XXXXXX").
XXXXXX: name of the folder (the display will only
show the first 8 characters).
The folders are selected cyclically: the first folder is
selected after the last folder and vice versa.
If no other folder/track is selected in the next 2
seconds, the first track on the new folder will be
played.
If the last track in the folder at that moment selected
is played, the next folder will be played.STRUCTURE OF THE FOLDERS
The radio with MP3 player:
❒recognises only the folders that contain MP3
format files;
❒if the MP3 files on a CD-ROM are structured in
"sub-folders", their structure is compressed to a
single level structure where the "sub-folders" are
taken to the level of the main folders.
262
SOUND-SYSTEM