2014 FIAT PANDA AUX

Audio section
❒Mute/Pause function;
❒Soft-Mute function;
❒Loudness function;
❒7-band graphic equaliser;
❒Separate bass/treble adjustment;
❒Right/left channel balance.
Media Player section (only with Blue&Me™)
For the Media Player functions see, theBlue&Me™
supplement.
AUX section (only with Blue&Me™)
(for versions/markets, where provided)
❒AUX source selection;
❒AUX Offset function: alignment of the portable
device volume with that of the other sources;
❒Portable player playback.
FUNCTIONS AND ADJUSTMENTSSWITCHING ON THE CAR RADIO
The car radio comes on when the button/knob
(ON/OFF) is pressed briefly.
When the car radio is turned on, the volume is
limited to value 20 if it was set to a higher value
when previously used or to value 5 if it was
previously set to value 0 or to Mute/Pause. The
previously set value is maintained in all other cases.
When the radio is switched on with the key
extracted from the ignition, it switches off
automatically after about 20 minutes. After the radio
has switched itself off automatically it can be turned
on for a further 20 minutes by pressing the(ON/OFF) button/knob.
SWITCHING OFF THE CAR RADIO
Briefly press the
(ON/OFF) button/knob.
SELECTING THE RADIO FUNCTIONS
By pressing the FM AS button quickly and repeatedly,
the following audio sources can be selected cyclically:
❒TUNER (“FM1”, “FM2”, “FMA”).
By pressing the AM button briefly and repeatedly, the
following audio sources can be selected cyclically:
❒TUNER ("MW1", "MW2").
242
SOUND-SYSTEM

AUDIO SETTINGS
The functions in the audio menu differ according to
the active source: AM/FM/CD/Media Player (only
withBlue&Me™) /AUX (only withBlue&Me™,
for versions/markets, where provided).
Press the
button briefly to change the Audio
functions.
After thebutton is first pressed, the display will
show the bass level value for the source activated at
that time (e.g. in FM mode the display will show the
wording "FM Bass +2").
Use the
or
buttons to scroll through the menu
functions. To change the setting of the function
selected use the
or
buttons. The current status
of the selected function appears on the display.
The functions managed by the Menu are:
❒BASS (adjustment of bass tones);
❒TREBLE (adjustment of high tones);
❒BALANCE (right/left balance adjustment);
❒FADER (front/back balance adjustment);
❒LOUDNESS (LOUDNESS function
activation/deactivation);
❒EQUALISER (activation and selection of factory-
set equaliser levels);
❒USER EQUALISER (customised equaliser setting).TONE ADJUSTMENT (bass/treble)
Proceed as follows:
❒Use
or
buttons to set the “Bass” or “Treble”
in the AUDIO menu;
❒press theor
button to increase/decrease the
bass or treble.
By pressing the buttons briefly, the levels will change
progressively. By holding them down longer, the levels
will change quickly.
BALANCE ADJUSTMENT
Proceed as follows:
❒Select the "Balance" setting in the AUDIO menu
using the
or
button;
❒press the
button to increase the volume of the
right speakers or the
button to increase the
volume of the left speakers.
By pressing the buttons briefly, the levels will change
progressively. By holding them down longer, the levels
will change quickly.
Select the value "
0
" to set the same level for
the right and left audio outputs.
244
SOUND-SYSTEM

USER EQ SETTINGS FUNCTION
(equaliser settings only if the USER setting has
been selected)
To set a customised equaliser adjustment, move to
"User" using the
or
buttons and press the
MENU button.
A 7-bar graph appears on the display, in which each
bar represents a frequency.
Select the bar to adjust using the
or
buttons; the
selected bar will start to flash and it can be adjusted
using the
or
buttons.
To store the setting, press the
button again. The
display will show the source activated at that time
followed by the text “User”. If the mode is “FM” the
display will show the text "FM EQ User".
MENU
Menu button functions
Press the Menu function briefly to activate the
MENU function. The display will show the first menu
item that can be adjusted (AF) ("AF Switching On" on
the display).
Use the
or
buttons to scroll through the menu
functions. To change the setting of the function
selected use the
or
buttons.
The current status of the function selected will be
shown on the display.
The functions managed by the Menu are:
❒AF SWITCHING (ON/OFF);❒TRAFFIC INFORMATION (ON/OFF);
❒REGIONAL MODE regional programmes
(ON/OFF);
❒MP3 DISPLAY (CD MP3 display settings);
❒SPEED VOLUME (speed-dependent automatic
volume control);
❒RADIO ON VOLUME (maximum radio volume
limit activation/deactivation);
❒SPEECH VOLUME (telephone volume setting);
❒AUX OFFSET (alignment of the portable device
volume to that of the other sources);
❒RADIO OFF (switching-off mode);
❒SYSTEM RESET Press the Menu button again to
exit the Menu function.
Note
The AF SWITCHING, TRAFFIC INFORMATION and
REGIONAL MODE adjustments are only possible in
FM mode.
246
SOUND-SYSTEM

NOTES
❒Using the Menu it is only possible to adjust the
activation/deactivation of the function and not the
minimum or maximum volume value.
❒If the "TA" or "TEL" functions or an external audio
source are activated when the radio is turned on,
the radio will come on at the volume set for these
sources. The volume can be adjusted between the
minimum and the maximum level, by deactivating
the external audio source.
❒If the battery charge is low, it will not be possible
to adjust the volume between the minimum and
maximum levels.
SPEECH VOLUME function
(telephone volume setting)
By turning the
(ON/OFF) button/knob or pressing
the
/
buttons, this function allows the volume to
be adjusted (settings from 1 to 40) or to be excluded
(OFF setting) for the Telephone andBlue&Me™
(except the Media Player function).
The display shows the current function status:
❒"Speech Off": function deactivated.
❒“Speech volume 23”: function active with volume
setting 23.AUX OFFSET function
(alignment of the portable device volume with
that of the other sources)
This function enables the alignment of the volume of
the AUX source, depending on its own portable
player, with that of the other sources.
To activate the function, press the MENU button and
select “AUX offset”.
Press the buttons
or
to decrease or increase the
volume value (set from–6to+6).
RADIO OFF function
(on and off mode)
This function is used to set the radio turning off
mode to one of two different settings. To turn the
function on, use the
or
buttons.
The chosen mode appears on the display:
❒"00 MIN": the radio turns off automatically in
connection with the ignition key; the radio turns
off automatically as soon as the key is turned to
the STOP position;
❒"20 MIN": the radio turns off independently of the
ignition key; the radio remains switched on for a
maximum period of 20 minutes after the key has
been turned to the STOP position.
251
SOUND-SYSTEM

RADIO (TUNER)INTRODUCTION
When the radio is switched on, the last function
selected before it was switched off is activated:
Radio, CD, CD MP3 or Media Player (only with
Blue&Me™) or AUX (only withBlue&Me™, for
versions/markets, where provided).
To select the Radio function when another audio
source is being listened to, briefly press the FM AS or
AM buttons depending on the desired band.
Once the Radio mode has been activated, the display
will show the name (RDS stations only) and the
frequency of the selected radio station, the frequency
band selected (e.g. FM1) and the preselect button
number (e.g. P1).FREQUENCY BAND SELECTION
With the Radio mode active, press the FM AS or AM
button briefly and repeatedly to select the desired
reception band.
Each time the button is pressed the following bands
are selected cyclically:
❒By pressing the FM AS button: “FM1”, “FM2” or
“FMA”;
❒By pressing the AM button: “MW1, MW2”.
Each band is highlighted by the name in the display.
The last station selected on the respective frequency
band will be tuned into.
The FM band is divided into sections: FM1, FM2 or
"FMA"; the FMA reception band is reserved for
broadcasters stored automatically using the
Autostore function.
254
SOUND-SYSTEM

AUX (only with the Blue&Me™
system)(for versions/markets, where provided)
INTRODUCTION
This section describes the variants regarding the
operation of the AUX source: as far as the operation
of the radio is concerned, refer to the description in
the "Functions and Adjustments" chapter.
AUX MODE
To activate the AUX source, press the MEDIA
button or the SRC control on the steering wheel
several times until the corresponding source is
displayed.IMPORTANT
The functions of the device connected to the AUX
socket are directly managed by the device itself; it is
not possible to change track/folder/playlist with radio
or steering wheel controls.
Do not leave the cable of your portable player
connected with the AUX socket after disconnection,
to avoid possible hiss from the speakers.
NOTE The AUX socket is not incorporated in the
radio. For its position, refer to theBlue&Me™
Supplement and its Quick Guide.
263
SOUND-SYSTEM