2014 FIAT DOBLO COMBI ECU

178
KNOWYOUR
VEHICLE
SAFETY
STARTING AND
DRIVING
WARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICA TIONS
INDEX❒ open the cover B-fig. 164 as shown;
❒ remove bulb C-fig. 165 by releasing it from the side con-
tacts, then insert the new bulb and make sure it is cor-
rectly clamped between these contacts;
❒ close the cover and secure the ceiling light into its hous-
ing, making sure it locks properly into place.CHANGING AN INTERIOR BULB
For the type of bulb and power rating, see “Changing
a bulb”.
FRONT CEILING LIGHT
Ceiling light with movable lens
Proceed as follows to replace the bulbs:
❒ remove the ceiling light A-fig. 163 by manoeuvring the
points shown by the arrows;
F0V0070mfig. 163F0V0072mfig. 165
F0V0071mfig. 164

179
KNOW
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX❒ replace bulbs C by releasing them from the side con-
tacts and making sure that the new bulbs are correctly
clamped between these contacts;
❒ close the flap B-fig. 167 and refit the ceiling light A-fig.
166 in its housing, making sure it locks into place cor-
rectly.
REAR CEILING LIGHT
To change the bulb, proceed as follows:
❒ remove the ceiling light A-fig. 168 by manoeuvring the
points shown by the arrows;
❒ open the cover B-fig. 169 as shown;
❒ remove bulb C-fig. 170 by releasing it from the side con-
tacts, then insert the new bulb and make sure it is cor-
rectly clamped between these contacts;
❒ close the cover B-fig. 169 and secure the ceiling light in-
to its housing, making sure it locks properly into place.
Ceiling light with spot lights (where provided)
Proceed as follows to replace the bulbs:
❒
manipulate the points shown by the arrows and remove
ceiling light A-fig. 166;
❒ open the protective flap B-fig. 167;
F0V0074mfig. 167
F0V0073mfig. 166
F0V0075mfig. 168

267
KNOW
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
Battery recharging ................. 188
Battery ...................................... 206
– jump starting .................... 155
– maintenance ..................... 208
– recharg e ............................. 188
– replace ment....................... 207
– tips for extending battery life ........................ 208
Body (mark ing) ...................... 220
Body codes .............................. 221
Body mark ing ......................... 220
Body paintwork identification plate .............. 220
Body vers ions ......................... 221
Body – body version codes ........ 221
– cleaning, care and maintenance ............. 214 Bonnet
– opening/closing ...... 91-92-93
Bookrest .................................... 76
Boot ........................................... 85
– expanding the boot ........... 89
– parcel shelf (removal) ....... 88
– removing the parcel shelf 88
– securing your load ............ 91
Boot courtesy light ................. 67
Boot – emergency opening from the inside ............................... 85-86
– expanding the boot ........... 89
– opening with remote contro l ................................... 6
– securing your load ............ 91
Brake Assist system ................ 98
A
BS system .............................. 96
Additional brake light – bulb replace ment.............. 176
Adjusting the vehicle interior lighting ..................................... 20
Air bag deactivation ............. 130
Air filter .................................. 206
Air recirculation ..........46-49-56
Air vents ................................... 43
Antifreeze – checking levels and topping up .................. 202
– specifications .................... 248
Ashtray ....................................... 75
ASR function .......................... 100
ASR system ............................ 100
Automatic climate control system ..................................... 51
INDEX