Engine Oil Viscosity (SAE Grade) — 1.4L Turbo
Engine
MOPAR® SAE 5W-40 synthetic engine oil or equivalent
Pennzoil® or Shell Helix® is recommended for all oper-
ating temperatures. This engine oil improves low tem-
perature starting and vehicle fuel economy. Your engine
oil filler cap also states the recommended engine oil
viscosity grade for your engine.
Lubricants which do not have both the engine oil certi-
fication mark and the correct SAE viscosity grade num-
ber should not be used.
Engine Oil Viscosity (SAE Grade) — 2.0L And
2.4L Engine
MOPAR® SAE 0W-20 engine oil or equivalent Pennzoil®
or Shell Helix® is recommended for all operating tem-
peratures. This engine oil improves low temperature
starting and vehicle fuel economy. Your engine oil filler
cap also states the recommended engine oil viscosity
grade for your engine.
Lubricants which do not have both the engine oil certi-
fication mark and the correct SAE viscosity grade num-
ber should not be used.
Materials Added To Engine Oil
The manufacturer strongly recommends against the addi-
tion of any additives (other than leak detection dyes) to the
engine oil. Engine oil is an engineered product and its
performance may be impaired by supplemental additives.
566 MAINTAINING YOUR VEHICLE
Engine Oil Disposal.....................567
Flashers Hazard Warning ........................519
Turn Signal ............................111
Flash-To-Pass ............................241
Flooded Engine Starting ....................413
Floor Console ............................292
Fluid, Brake .............................611
Fluid Capacities ..........................608
Fluid Leaks .............................112
Fluid Level Checks Automatic Transmission ..................587
Fluids, Lubricants and Genuine Parts ...........609
Fog Lights ............................. .239
Folding Rear Seat ........................ .231
Freeing A Stuck Vehicle .....................547
Fuel .................................. .492
Adding ............................. .497Additives
............................ .495
Capacity ............................ .608
Clean Air ............................ .493
Ethanol ............................. .493
Filler Cap (Gas Cap) .....................497
Filler Door (Gas Cap) ....................316
Gasoline ............................. .492
Gauge ...............................314
Light ............................... .316
Materials Added ........................495
Methanol ............................ .493
Octane Rating ..........................492
Requirements ..........................492
Tank Capacity ..........................608
Fueling ............................... .497
Fuel System Caution .......................498
Fuses ................................. .595
638 INDEX