2014 DODGE CHARGER SRT key fob

[x] Cancel search: key fob

Page 399 of 614

DODGE CHARGER SRT 2014 7.G Owners Manual STARTING PROCEDURES
Before starting your vehicle, adjust your seat, adjust the
inside and outside mirrors, fasten your seat belt, and if
present, instruct all other occupants to buckle their seat
belt

Page 400 of 614

DODGE CHARGER SRT 2014 7.G Owners Manual CAUTION!
Damage to the transmission may occur if the follow-
ing precautions are not observed:
•Do not shift from REVERSE, PARK, or NEUTRAL
into any forward gear when the engine is above
idle speed.

Page 404 of 614

DODGE CHARGER SRT 2014 7.G Owners Manual WARNING!
Remember to disconnect the engine block heater
cord before driving. Damage to the 110-115 Volt
electrical cord could cause electrocution.
AUTOMATIC TRANSMISSION
WARNING!
•Unintended movemen

Page 405 of 614

DODGE CHARGER SRT 2014 7.G Owners Manual WARNING!(Continued)
•Never leave children alone in a vehicle, or with
access to an unlocked vehicle. Allowing children to
be in a vehicle unattended is dangerous for a
number of reasons. A child or

Page 408 of 614

DODGE CHARGER SRT 2014 7.G Owners Manual the transmission locking mechanism may make it diffi-
cult to move the shift lever out of PARK. As an added
precaution, turn the front wheels toward the curb on a
downhill grade and away from the curb

Page 409 of 614

DODGE CHARGER SRT 2014 7.G Owners Manual WARNING!(Continued)
•When leaving the vehicle, always remove the Key
Fob and lock your vehicle.
• Never leave children alone in a vehicle, or with
access to an unlocked vehicle. Allowing children

Page 426 of 614

DODGE CHARGER SRT 2014 7.G Owners Manual WARNING!
•Never use the PARK position as a substitute for the
parking brake. Always apply the parking brake
fully when parked to guard against vehicle move-
ment and possible injury or damage.
• W

Page 505 of 614

DODGE CHARGER SRT 2014 7.G Owners Manual Proper towing or lifting equipment is required to prevent
damage to your vehicle. Use only tow bars and other
equipment designed for this purpose, following equip-
ment manufacturer ’s instructions.
Page:   < prev 1-10 9-16 17-24 25-32 33-40 next >