Page 63 of 192
61
2
Dimensions
TECHNICAL DATA
DIMENSIONS
The light van "L1" is the standard model, the "L2 - Worksite Pack" version is a model sold according to country:
Light van (in mm)
L1
L2 (Worksite Pack)
L Overall length
3 864
3 881
H Overall height
1 721
1 742
Height with roof bars
1 782
1 803
A Wheelbase
2 513
B Front overhang
760
777
C Rear overhang
591
D Overall width
2 019
Width (with mirrors folded)
1 816
E Width of front track
1 469
1 464
F Width of rear track
1 465
G Height of load sill
527
544
I Length of interior fl oor
1 523
J Maximum interior load height
1 205
K Maximum interior width (10 cm from the fl oor)
1 473
M Interior width between wheel arches
1 046
Volume
(m
3 )
2.5
Page 65 of 192
63
2
Dimensions
TECHNICAL DATA
Combi (in mm)
Standard
All-terrain
L Overall length
3 959
3 970
H Overall height
1 721
1 742
Height with roof bars
1 782
1 803
A Wheelbase
2 513
B Front overhang
855
866
C Rear overhang
591
D Overall width
2 019
Width (with mirrors folded)
1 816
E Width of front track
1 464
F Width of rear track
1 465
G Height of load sill
527
544
I Length of interior fl oor (rear bench seat in place)
743
Length of interior fl oor (rear bench seat fully folded)
1 130
J Maximum interior load height (under rear shelf)
592
K Maximum interior width (10 cm from the fl oor)
1 473
M Interior width between wheel arches
1 046
Page 67 of 192
65
2
Dimensions
TECHNICAL DATA
Combi (in mm)
Standard
All-terrain
L Overall length
3 959
3 970
H Overall height
1 721
1 742
Height with roof bars
1 794
1 803
A Wheelbase
2 513
B Front overhang
855
866
C Rear overhang
591
D Overall width
2 019
Width (with mirrors folded)
1 816
E Width of front track
1 464
F Width of rear track
1 465
G Height of load sill
527
544
I Length of interior fl oor (rear bench seat in place)
743
Length of interior fl oor (rear bench seat fully folded)
1 130
J Maximum interior load height (under rear shelf)
592
K Maximum interior width (10 cm from the fl oor)
1 473
M Interior width between wheel arches
1 046
Page 98 of 192
96
Seats
FRONT SEATS
Head restraints
Head restraint height adjustment: to raise or
lower the head restraint, slide it by pressing
the lug.
The adjustment is correct when the upper
edge of the head restraint is level with the
top of the head.
To remove the head restraint, release the
base of the rod to press the tab and raise
the head restraint to the highest position.
To refit the head restraint, press the tab of
the lug and engage the head restraint rods
in the openings keeping them in line with the
seat back.
Never drive with the head restraints
removed. They must be in place and
adjusted correctly.
Page 99 of 192
97
4
EASE OF USE and COMFORT
Seats
Seat cushion height
To adjust the height of the driver's seat
cushion, pull the control upwards as many
times as necessary to raise.
To lower, push the control downwards as
many times as necessary.
Forwards-backwards adjustment
Heated seat control
Press the control.
The temperature is controlled automatically.
Pressing a second time stops operation. Lift the control bar and slide the seat
forwards or backwards to the required
position.
Lumbar support
Seat back angle
Turn the control to adjust the angle of the
seat back. Turn the control.
Armrest
The driver's seat may be fitted with an
armrest on the centre console side.
Raise or lower completely the armrest to
obtain the most comfortable driving position.
Page 111 of 192

109
4
EASE OF USE and COMFORT
Practical information
LOAD SPACE FITTINGS
Stowing rings
There are 6 stowing rings on the rear floor to
secure your loads.
As a safety precaution in case of sharp
braking, you are advised to place heavy
objects as far forwards towards the driver's
seat as possible.
Storage pocket
A storage pocket is provided at the rear left
of the load space.
Torch
A magnetic torch is provided at the rear
right of the load space.
Remove the torch from its base by
pressing the button then pivoting the torch
downwards by 90 degrees.
To switch on the torch, slide the switch
forwards.
To change the 4 rechargeable batteries
(NiMH type), remove the protective cover
from the torch.
To put the torch back in place, engage
it in the notches on the base and pivot it
upwards.
Ladder type vertical partition
Behind the driver's seat, a ladder type
vertical partition protects the driver against
the risk of load movement.
Partitions
Panel, glazed, mid-height panel with grille
and modular vertical grille type partitions are
available for your light van.
Carrying passengers in the load space
is not permitted.
It is advisable to immobilise the load
by securing it firmly using the stowing
rings on the floor. The torch's storage batteries recharge
automatically while driving.
An additional lamp is fitted in the middle
of the torch housing (refer to the "Interior
lighting" section).
Page 137 of 192
135
5
SAFETY
Child safety
RÖMER BabySafe Plus ISOFIX
(size category E
)
Group 0+: up to 13 kg
It is installed in the rearward facing position using an ISOFIX base which attaches
to the rings A
.
The support leg for the ISOFIX base must be adjusted in height so that it is contact
with the floor of the vehicle.
RÖMER Duo Plus ISOFIX
(size category B1
)
Group 1: from 9 to 18 kg
It is installed in the forward facing position.
It is fitted with an upper strap that is attached to the ISOFIX upper ring,
called the TOP TETHER.
Three angles for the shell: sitting, inclined and lying positions.
This child seat can also be used on seats which are not fitted with ISOFIX mountings.
In this case, it must be attached to the vehicle seat using the three-point seat belt.
Follow the instructions for fitting the child seat given in the seat manufacturer's installation guide.
ISOFIX CHILD SEAT RECOMMENDED BY CITROËN AND APPROVED FOR
YOUR VEHICLE (COMBI)
Page 159 of 192
157
7
QUICK HELP
Changing a fuse
Table of dashboard fuses, driver's side
Mark
ing
Rating
Functions
F12
7.5 A Right-hand dipped beam headlamp supply
F13
7.5 A Left-hand dipped beam headlamp supply - headlamp height
adjuster
F31
5 A Engine control unit supply switch
F32
7.5 A Front lamp - front courtesy lamp - rear courtesy light lamp
F36
10 A Audio system - mobile telephone pre-equipment - air
conditioning control panel - EODB diagnostic socket
F37
5 A Brake lamp - instrument panel
F38
20 A Door locking
F43
15 A Screenwash pump
F47
20 A Driver's electric window motor supply
F48
20 A Passenger's electric window motor supply
F49
5 A Parking sensors control unit - rear lighting switch -
electric door mirrors - volumetric alarm control unit
F50
7.5 A Airbags control unit
F51
7.5 A Switch on brake pedal - switch on clutch pedal -
door mirror controls - central Bluetooth system
F53
5 A
Instrument panel - rear foglamps