Page 15 of 400
78
79
13Familiarisation
Sitting comfortably
Front seats
Manual
1.
Head restraint height and angle
adjustment.
2.
Backrest angle adjustment.
3.
Seat cushion height adjustment.
4.
Seat forwards-backwards adjustment.
5.
Driver's
lumbar support adjustment.
Electrical
1.
Angle, seat height and seat for wards-
backwards adjustment.
2.
Backrest angle adjustment.
3.
Driver's
lumbar support adjustment.
4.
Manual cushion adjustment.
Page 80 of 400
Front seats
Manual
1.
Adjustments to the height and angle
of
the head restraint
To raise it, pull upwards.
To lower it, press on the lug and the head
restraint at the same time.
2.
Adjustment of the backrest angle
Turn the wheel to adjust the angle of the
backrest.
3.
Adjustment of the seat height
Raise or lower the control lever the number of
times required to obtain the desired position.
4.
For wards-backwards adjustment of the
seat position
Lift the control bar and slide the seat
for wards or backwards.
5.
Adjustment of the driver's lumbar
support
Turn the wheel to obtain the desired level
of lumbar support.
Before moving the seat backwards, ensure that there is nothing that might prevent the full
travel of the seat, so as to avoid the risk of of jamming the seat caused by the presence of
objects on the floor behind the seat or rear passengers. If the seat jams, stop the movement
immediately.
Page 81 of 400
79Comfort
Switch on the ignition or start the engine if the vehicle has gone into
economy mode.
The electric functions of the driver's seat are active for about 45 seconds
after opening the front door. They are deactivated about 45 seconds after
switching off the ignition and in economy mode.
To reactivate them, switch on the ignition.
Electric
1.
Adjustment of the seat cushion angle
and height, and for wards-backwards
adjustment
Raise or lower the front of the control
to adjust the seat cushion angle.
Raise or lower the rear of the control
to raise or lower the seat.
Simultaneously raise or lower the
front and rear of the control in order
to raise or lower the entire seat.
2.
Adjustment of the backrest angle
Move the control for wards or backwards
to adjust the backrest angle.
3.
Adjustment of driver's lumbar
support
Press the control switches to obtain
the desired level of lumbar support.
4. Manual adjustment of the cushion
Pull on the grip to adjust the length of
the cushion.
Before moving the seat backwards, ensure that there is
nothing that might prevent the full travel of the seat, so as to
avoid the risk of of jamming the seat caused by the presence
of objects on the floor behind the seat or rear passengers. If
the seat jams, stop the movement immediately.
