Page 363 of 400
361Visual search
Exterior
Electronic key / Keyless Entry and
Star ting 5 4 - 60, 10 4 -105
- opening / closing
- anti-theft protection
- battery
- starting
Welcome lighting 151
Directional lighting 153
Cornering lighting 154
Headlamp height adjustment 152
Changing bulbs 211-215
- front lamps
- foglamps
- direction indicator repeaters
Wipers 155 -15 8
Changing a wiper blade 158, 226
Doors 54- 63
- Keyless Entry and Starting
- opening / closing
- central locking
- emergency control
Alarm 65 - 67
Fuel tank, misfuel
prevention 72-73
Cockpit glass roof 70 -71
Roof bars 230
Accessories 231-232
ESP: ABS, EBA, ASR, DSC 182-185
Tyre under-inflation detection 125 -126
Ty r e
pressures 125, 201, 260
Changing a wheel 202-209
- tools
- removing / refitting
Snow chains 210
Temporary puncture repair kit 196 -201
Boot 55, 64
- opening / closing
- emergency release
Changing bulbs 216 -218
- rear lamps
- 3rd brake lamp
- number plate lamps
- foglamps
Parking sensors 138-139
Reversing camera 140
To w i n g 2 2 7
Towbar 228-229
Door mirrors 86
Door mirror spotlamps 151
Page 377 of 400
5
AdBlue ®
additive
Topping up the AdBlue ®
additive
If the AdBlue ®
additive is spilt outside
of the tank, wash the spillage using
cold water to avoid crystallisation of the
product and damage to surrounding
materials.
If the AdBlue
®
additive has already
formed crystals, wipe them of with a
sponge and hot water.
As soon as the "UREA" warning lamp comes on,
you must fill or top up the additive tank as soon
as possible.
For filling of the AdBlue
®
tank, it is recommended
that you contact a franchised dealer or a
qualified workshop.
This refilling operation forms part of the routine
ser vicing of your vehicle (refer to the ser vicing
booklet).
If the AdBlue
®
additive is completely used up
("starting prevented" or "No start on 0 km"
message), you will not be able to restart the
vehicle.
To allow starting, you can top-up yourself,
adding at least 3.8 litres of the AdBlue
® additive
(equivalent to around 3 000 miles (5 000 km) of
range for the AdBlue
® additive) before making an
appointment with a dealer as soon as possible to
have the AdBlue
® tank filled. If you have to top-up yourself, ensure that the
vehicle is on a flat and level sur face (not over a
kerb or on a slope, ...) so as to ensure correct
filling.
Do not fill the tank when the ambient temperature
is below -10°C.
)
If necessary, use the
screwdriver end of the
towing eye, located in the
boot.
)
Remove the ignition key, or if your vehicle
has one, press the START/STOP button to
switch off the engine.
)
Lift the boot carpet then the cover or spare
wheel for access to the tank filler cap.
)
Unscrew and remove the black cap.
)
Unscrew and remove the 2nd cap (blue).
)
Remove the cap from the AdBlue
®
additive
container
)
To top-up, follow the instructions on the
container.
)
Wipe any splashes of the AdBlue
®
additive
)
Once you have finished topping-up, refit the
blue and then the black cap.
)
Wait for around 5 minutes without doing
anything on the vehicle (opening a door,
radio, …) before switching on the ignition.
Page 383 of 400
5
AdBlue ®
additive
Topping up the AdBlue ®
additive
If the AdBlue ®
additive is spilt outside
of the tank, wash the spillage using
cold water to avoid crystallisation of the
product and damage to surrounding
materials.
If the AdBlue
®
additive has already
formed crystals, wipe them of with a
sponge and hot water.
As soon as the "UREA" warning lamp comes on,
you must fill or top up the additive tank as soon
as possible.
For filling of the AdBlue
®
tank, it is recommended
that you contact a franchised dealer or a
qualified workshop.
This refilling operation forms part of the routine
ser vicing of your vehicle (refer to the ser vicing
booklet).
If the AdBlue
®
additive is completely used up
("starting prevented" or "No start on 0 km"
message), you will not be able to restart the
vehicle.
To allow starting, you can top-up yourself,
adding at least 3.8 litres of the AdBlue
® additive
(equivalent to around 3 000 miles (5 000 km) of
range for the AdBlue
® additive) before making an
appointment with a dealer as soon as possible to
have the AdBlue
® tank filled. If you have to top-up yourself, ensure that the
vehicle is on a flat and level sur face (not over a
kerb or on a slope, ...) so as to ensure correct
filling.
Do not fill the tank when the ambient temperature
is below -10°C.
)
If necessary, use the
screwdriver end of the
towing eye, located in the
boot.
)
Remove the ignition key, or if your vehicle
has one, press the START/STOP button to
switch off the engine.
)
Lift the boot carpet then the cover or spare
wheel for access to the tank filler cap.
)
Unscrew and remove the black cap.
)
Unscrew and remove the 2nd cap (blue).
)
Remove the cap from the AdBlue
®
additive
container
)
To top-up, follow the instructions on the
container.
)
Wipe any splashes of the AdBlue
®
additive
)
Once you have finished topping-up, refit the
blue and then the black cap.
)
Wait for around 5 minutes without doing
anything on the vehicle (opening a door,
radio, …) before switching on the ignition.
Page 397 of 400
11Practical information
After emptying the bottle, wipe away any
spillage around the tank filler using a damp cloth.
Refit the blue cap to the tank and turn it a 6 th of a turn clockwise, to its stop. Refit the black plastic blanking plug, clipping it in place. Lower the boot floor and close the tailgate.
Important: if your vehicle's AdBlue ®
tank is completely empty - which is confirmed by the alert messages and the impossibility of starting the engine - you must add at least 3.8 litres, so two 1.89 litre bottles. If any additive is split or splashed, wash immediately with cold water or wipe with a damp cloth. If the additive has crystallised, clean it off using a sponge and hot water.
Important: when topping up after running out of additive , signalled by the message "Top up emissions additive: Starting prevented", you must wait for approximately 5 minutes before switching on the ignition, without opening the driver's door, unlocking the vehicle, placing the key of the "Keyless Entr y and Star ting" system inside the vehicle or inser ting the electronic key in the reader. Switch on the ignition, wait for 10 seconds, then start the engine.
Never dispose of AdBlue ® additive ® additive ®
bottles in the household waste. Place them in a special container provided this purpose or take them to your dealer.