Unclip the black plastic blanking plug using a lever. Insert your fingers into the aperture and turn the blue cap a 6 th of a turn anti-clockwise. Carefully lift off the cap, without dropping it.
Obtain a bottle of AdBlue ® . After first checking the use-by date, read carefully the instructions on use on the label before pouring the contents of the bottle into your vehicle's AdBlue ® tank. ® tank. ®
11Practical information
After emptying the bottle, wipe away any
spillage around the tank filler using a damp cloth.
Refit the blue cap to the tank and turn it a 6 th of a turn clockwise, to its stop. Refit the black plastic blanking plug, clipping it in place. Lower the boot floor and close the tailgate.
Important: if your vehicle's AdBlue ®
tank is completely empty - which is confirmed by the alert messages and the impossibility of starting the engine - you must add at least 3.8 litres, so two 1.89 litre bottles. If any additive is split or splashed, wash immediately with cold water or wipe with a damp cloth. If the additive has crystallised, clean it off using a sponge and hot water.
Important: when topping up after running out of additive , signalled by the message "Top up emissions additive: Starting prevented", you must wait for approximately 5 minutes before switching on the ignition, without opening the driver's door, unlocking the vehicle, placing the key of the "Keyless Entr y and Star ting" system inside the vehicle or inser ting the electronic key in the reader. Switch on the ignition, wait for 10 seconds, then start the engine.
Never dispose of AdBlue ® additive ® additive ®
bottles in the household waste. Place them in a special container provided this purpose or take them to your dealer.