2014 Citroen DS3 tow

DS3_en_Chap00c_eco-conduite_ed01-2014
Before moving off, if the passenger compartment is too warm, ventilate it by   opening   the   windows   and   air   vents   before   using   the   air   conditioning.
Above
  30   mph   (50   km/h),   close   the   windows   and   leave   the   air   vents
 ope

n.
Remember
  to   make   use   of   equipment   that   can   help   keep   the
 t

emperature   in   the   passenger   compartment   down   (sunroof   and   window
 b

linds...).
Switch
  off   the   air   conditioning,   unless   it   has   automatic   regulation,   as
 s

oon   as   the   desired   temperature   is   attained.
Switch
  off   the   demisting   and   defrosting   controls,   if   not   automatic.
Switch
  off   the   heated   seat   as   soon   as   possible.
Switch
  off   the   headlamps   and   front   foglamps   when   the   level   of   light  
d

oes   not   require   their   use.
Avoid
  running   the   engine   before   moving   off,   particularly   in   winter;   your  
v

ehicle   will   warm   up   much   faster   while   driving.
Eco-driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.
Optimise the use of your gearbox
With a manual gearbox, move off gently and change up without waiting. During   acceleration   change   up   early.
With
  an   automatic   or   electronic   gearbox,   give   preference   to   automatic  
m

ode   and   avoid   pressing   the   accelerator   pedal   heavily   or   suddenly.
The
  gear   shift   indicator   invites   you   engage   the   most   suitable   gear:   as  
s

oon   as   the   indication   is   displayed   in   the   instrument   panel,   follow   it  
s

traight   away.
For
  vehicles   fitted   with   an   electronic   or   automatic   gearbox,   this  
i

ndicator   appears   only   in   manual   mode.
drive smoothly
Maintain a safe distance between vehicles, use engine braking rather than   the   brake   pedal,   and   press   the   accelerator   progressively.   These  
p

ractices   contribute   towards   a   reduction   in   fuel   consumption   and   CO
2
emissions
 
and
 
also
 
helps
 
reduce
 
the
 
background
 
traffic
 
noise.
control the use of your electrical
equipment
If your vehicle has cruise control, make use of the system at speeds a bove   25   mph   (40   km/h)   when   the   traffic   is   flowing   well.As
  a   passenger,   if   you   avoid   connecting   your   multimedia   devices  
(

film,   music,   video   game...),   you   will   contribute   towards   limiting   the  c
onsumption   of   electrical   energy,   and   so   of   fuel.
Disconnect   your   portable   devices   before   leaving   the   vehicle.

23
DS3_en_Chap01_controle-de-marche_ed01-2014
Operation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding system has come into operation.
W arning /indicator lampis on
cau

seAction / Observations
Left-hand
direction indicatorflashing with buzzer.The   lighting   stalk   is   pushed   down.
Right-hand
direction indicatorflashing with buzzer.The   lighting   stalk   is   pushed   up.
Sidelamps fixed. The
  lighting   stalk   is   in   the   "Sidelamps"  
p

osition.
di

pped beam
headlamps fixed.
The
  lighting   stalk   is   in   the   "Dipped  
b

eam   headlamps"   position.
Main beam
headlamps fixed.
The
  lighting   stalk   is   pulled   towards  
yo

u. Pull
  the   stalk   to   return   to   dipped   beam   headlamps.
Front foglamps fixed. The
  front   foglamps   are   switched   on  
u

sing   the   ring   on   the   lighting   control  
st

alk. Turn
  the   ring   on   the   lighting   control   stalk   rear wards  
t

wice   to   switch   off   the   front   foglamps.
Rear foglamps fixed. The
  rear   foglamps   are   on.Turn
  the   ring   on   the   stalk   rear ward   to   turn   off   the   rear  
fo

glamps.
Hazard warning
lamps
flashing
  with   audible  
s

ignal. The
  hazard   warning   lamps   switch,  
l

ocated on the dashboard, has been
operated. The
  left-hand   and   right-hand   direction   indicators   and  
t

heir   associated   indicator   lamps   flash   simultaneously.
Monitoring

63
DS3_en_Chap03_ouvertures_ed01-2014
Starting the vehicle
F Insert  the   key   in   the   ignition   switch. T
he   system   recognises   the   starting   code.
F
 
T
urn   the   key   fully   towards   the   dashboard   to  
p

osition 3 (Starting) .
F
 
W
hen   the   engine   starts,   release   the   key.F
 I mmobilise   the   vehicle.
F  T urn   the   key   fully   towards   you   to  
position 1 (Stop) .
F
 
R
emove   the   key   from   the   ignition   switch.
Switching the vehicle off
Do not attach any heavy objects to the   key   as   this   could   weigh   down   on   it  
w

hen   in   the   ignition   switch   and   cause  
a

  fault.
Key reminder
If the key is left in the ignition switch, an audible   signal   sounds   when   the   driver's  
d

oor   is   opened.
Access

DS3_en_Chap04_confort_ed01-2014
These have one position for use (up) and a
stowed  position   (down).
They
  can   also   be   removed.
To
  remove   a   head   restraint:
F
 
r
elease   the   backrest   using   control   1,
F
 
t
ilt   the   backrest   2   slightly   for wards,
F

p
ull the head restraint upwards to the stop,
F
 
t
hen,   press   the   lug   A.
Rear head restraints
Never drive with the head restraints
removed;
  they   must   be   in   place   and  
c

orrectly
 adj
usted.
Steering wheel ad justment
F When stationary , pull the control lever to
release   the   adjustment   mechanism.
F
 
A
djust   the   height   and   reach   to   suit   your  
d

riving   position.
F
 
P
ush   the   control   lever   to   lock   the  
a

djustment
 m
echanism.
as a s

afety precaution, these
operations should only be carried out
with
  the   vehicle   stationary.

DS3_en_Chap04_confort_ed01-2014
Recommendations for ventilation and air conditioning
If after an extended stop in sunshine, the   interior   temperature   is   very  
h

igh,   first   ventilate   the   passenger  
c

ompartment   for   a   few   moments.
Put
  the   air   flow   control   at   a   setting   high  
e

nough   to   quickly   change   the   air   in   the  
p

assenger
 c
ompartment.
The
  air   conditioning   system   does   not  
c

ontain chlorine and does not present
any
  danger   to   the   ozone   layer.
In
 
order
 
for
 
these
 
systems
 
to
 
be
 
fully
 
effective,
 
follow
 
the
 
operation
 
and
 
maintenance
 g
uidelines belo
w:
F
 
T

o
 
obtain
 
an
 
even
 
air
 
distribution,
 
take
 
care
 
not
 
to
 
obstruct
 
the
 
exterior
 
air
 
intake
 
grilles
 
l

ocated at the base of the windscreen, the nozzles, the vents and the air outlets, as well
as
 
the
 
air
 
extractor
 
located
 
in
 
the
 
boot.
F
 
D

o
 
not
 
cover
 
the
 
sunshine
 
sensor,
 
located
 
on
 
the
 
dashboard;
 
this
 
is
 
used
 
for
 
regulation
 
o

f
 
the
 
air
 
conditioning
 
system.
F
 
O

perate
 
the
 
air
 
conditioning
 
system
 
for
 
at
 
least
 
5
 
to
 
10
 
minutes,
 
once
 
or
 
twice
 
a
 
month
 
t

o
 
keep
 
it
 
in
 
per fect
 
working
 
order.
F
 
E

nsure
 
that
 
the
 
passenger
 
compartment
 
filter
 
is
 
in
 
good
 
condition
 
and
 
have
 
the
 
filter
 
e

lements
 
replaced
 
regularly.
 W

e
 
recommend
 
the
 
use
 
of
 
a
 
combined
 
passenger
 
compartment
 
filter.
 
Thanks
 
to
 
its
 
s

pecial active additive, it contributes to the purification of the air breathed by the
occupants
 
and
 
the
 
cleanliness
 
of
 
the
 
passenger
 
compartment
 
(reduction
 
of
 
allergic
 
s

ymptoms,
 
bad
 
odours
 
and
 
greasy
 
deposits).
F
 
T

o
 
ensure
 
correct
 
operation
 
of
 
the
 
air
 
conditioning
 
system,
 
you
 
are
 
also
 
advised
 
to
 
have
 
i

t
 
checked
 
regularly
 
as
 
recommended
 
in
 
the
 
maintenance
 
and
 
warranty
 
guide.
F
 
I

f
 
the
 
system
 
does
 
not
 
produce
 
cold
 
air,
 
switch
 
it
 
off
 
and
 
contact
 
a
 
CITROËN
 
dealer
 
or
 
a

 
qualified
 
workshop.
When
 
towing
 
the
 
maximum
 
load
 
on
 
a
 
steep
 
gradient
 
in
 
high
 
temperatures,
 
switching
 
off
 
the
 
a

ir
 
conditioning
 
increases
 
the
 
available
 
engine
 
power
 
and
 
so
 
improves
 
the
 
towing
 
ability. The condensation created by the air
conditioning
  results   in   a   discharge  
o

f water under the vehicle which is
per fectly
  normal.

DS3_en_Chap04_confort_ed01-2014
6. Air distribution adjustment
Pressing this button several times in succession enables the air flow to be
directed
  in   turn   towards:
-

t

he windscreen and the side windows
(demisting
  or   defrosting),
-

t

he windscreen, side windows and air
vents,
-

t

he windscreen, the side windows, the air
vents and the footwells,
-

t

he windscreen, the side windows and the
footwells,
-

t

he footwells,
-

t

he air vents and the footwells,
-
 
t

he
 
air   vents.
Avoid driving for long periods with the air conditioning   switched   off   (risk   of   misting a

nd   reduction   of   the   air   quality   in   the   cabin).
Press the "full fan" button to
increase   the   air   flow.
7. Air flow adjustment
The air flow symbol, the fan, fills progressively according   to   the   value   requested.
Press the "empty fan" button to
decrease
  the   air   flow.
Switching the system off
Press the air flow "empty fan"
button 7   until   the   fan   symbol  
d

isappears.
This action switches off all of the functions of
the
 
air
 
conditioning   system.
Thermal
 
comfort   is   no   longer   controlled.   A  
s

light
 
flow   of   air   resulting   from   the   movement   of  
t

he
 
vehicle,   remains   perceptible   however.
Pressing
 
the   air   flow   "full fan" button 7 or
on "AUTO"
 

reactivates   the   system   with   the  
v

alues
 
set   before   it   was   switched   off.

DS3_en_Chap05_amenagement_ed01
1. Rear parcel shelf  (
see   the   following   page   for   details)
2.
R

etaining strap
3.
L

ocation for Hi-Fi amplifier
4.
S

towing rings
5.
S

torage box (version equipped with a
temporary puncture repair kit)
 (

see   the   following   page   for   details)


or
T

ool box (version equipped with a spare
wheel)
 (

refer   to   the   "Changing   a   wheel"   section)
Boot fittings

DS3_en_Chap06_conduite_ed01-2014
There is a risk of damage to the gearbox:
- i f you press the accelerator and
brake
  pedals   at   the   same   time,
-
 
i
f   you   force   the   movement   of   the  
g

ear   lever   from   the   P position to
another position when the battery
is
  flat.
To
  reduce   fuel   consumption   when   at
 a

  prolonged   standstill   with   the   engine
 r

unning   (traffic   jam...),   put   the   gear   lever   in
 t

he N
 

position   and   apply   the   parking   brake.
If the lever is not in position P
,
when the driver's door is opened or
approximately
 
45
 
seconds
 
after
 
the
 
i

gnition
 
is
 
switched
 
off,
 
a
 
warning
 
m

essage
 
appears
 
in
 
the
 
screen.
F

R

eturn the lever to position P ;
 
the
 
m

essage
 d

isappears.
When
 
driving
 
on
 
flooded
 
roads
 
or
 
when
 
c

rossing
 
a
 
ford,
 
proceed
 
at
 
walking
 
p

ace.
Operating fault
Manual operation
When the ignition is on, the lighting o f   this   warning   lamp,   accompanied  
b

y
 
an
 
audible   signal   and   a   message   in   the  
m

ultifunction   screen,   indicates   a   gearbox   fault.
In
 
this
 
case,   the   gearbox   switches   to   back-up  
m

ode
 
and
 
is   locked   in   3rd   gear.   You   may   feel  
a

 
substantial   knock   when   changing   from   P
to R
 
and
 
from   N to R .
  This   will   not   cause   any  
d

amage
 
to
 
the   gearbox.
Do
 
not
 
exceed   60   mph   (100   km/h),   local   speed  
r

estrictions
 p
ermitting.
Contact a CITR
oË

N dealer or a qualified
workshop
 
as   soon   as   possible.
F

Sel

ect position M for sequential
 c

hanging
 o

f
 
the
 
four
 
gears.
F

P

ush the lever towards the +
 
sign
 
to
 
c

hange
 
up
 
a
 
gear.
F

P

ull the lever towards the -
 
sign
 
to
 
change
 
d

own
 
a
 
gear.
It
 
is
 
only
 
possible
 
to
 
change
 
from
 
one
 
gear
 
to
 
a

nother
 
if
 
the
 
vehicle
 
speed
 
and
 
engine
 
speed
 
p

ermit;
 
other wise,
 
the
 
gearbox
 
will
 
operate
 
t

emporarily
 
in
 
automatic
 
mode. This
 
symbol
 
is
 
displayed
 
if
 
a
 
gear
 
i

s
 
not
 
engaged
 
correctly
 
(selector
 
b

etween
 
two
 
positions).
d

 
disappears
 
and
 
the
 
gears
 
e

ngaged
 
appear
 
in
 
succession
 
in
 
the
 
in

strument
 pan

el.
Stopping the vehicle
Before switching off the engine, you can engage p osition P or N 
to   place   the   gearbox   in   neutral.
In
  both   cases,   apply   the   parking   brake   to
 i

mmobilise   the   vehicle.
Invalid value during manual
operation
If the engine speed is too low or too high, the gear   selected   flashes   for   a   few   seconds,   then  
t

he   actual   gear   engaged   is   displayed.
It
  is   possible   to   change   from   position  d
(automatic)
  to   position   M   (manual)   at   any   time.
When
  the   vehicle   is   stationary   or   moving  
v

ery   slowly,   the   gearbox   selects   gear   M1
automatically.
The
  sport   and   snow   programmes   do   not  
o

perate   in   manual   mode.