Page 16 of 384
Sitting comfortably
)To raise, pull it upwards. )To lower, press the lug Aand down on the head restraint at the same time.
Head restraint height
adjustment
80
1.
Release the adjustment mechanism. 2.Adjust for height and reach.3.Lock the adjustment mechanism.
Steering wheel adjustment
85
For reasons of safety, these operationsmust only be carried out with the vehicle stationary.
Access to rear seats
)
Pull the control lever upwards to fold the backrest and move the seat forwards.
81, 83
Take care to use only the correct lever, located at the top of the seat backrest.
Page 83 of 384
81Comfort
Access to the rear seats
)Pull the control upwards to fold the seatback and move the seat forward.
No person or object should prevent the seat slide from returning to its initialposition; the return to this position isnecessary for longitudinal locking. Check that the seat belt has reeled in correctly so as to not impede access to the rear seats for passengers.
Grab handle
This easy to use handle, located at the top of
the side trim:
- provides a means of suppor t for the outer
rear passengers when moving,
- provides a hand hold to ease access to the
rear seats,
-
facilitates exit from the rear seats.
If any difficulty is encountered,simultaneously push rear wards the seat backrest angle control lever (located at the bottom of the backrest)and the backrest.
Ensure that you use only the appropriate control lever, located at the top of the backrest.
)
To return the seat to its initial position, push
the backrest rearwards.
Page 85 of 384
83Comfort
Additional adjustments
Access to rear seats
)Pull the handle forwards to fold the seatbackrest and move the seat forwards.
On repositioning, the seat returns to its
initial position.
Grab handle
This ergonomic grab handle, located at the top
of the side trim, ser ves:
- as a handle to stead
y rear passengers
when driving,
- as a grip to improve access to the rear seats,
- to facilitate exit from the rear seats.
No person or object must prevent the seat slide from returning to its initial position; return to this position isnecessary for the seat to lock in place.
Ensure that the seat belt reels incorrectly to avoid hindering access for the passengers to the rear seats.
Page 86 of 384
Rear seats
)Move the corresponding front seat forwardif necessary. )Check that the seat belt is positioned correctly on the side of the seat backrest. )Place the head restraints in the lowposition.
Folding the backrest
)
Pull control 1
forwards to release the seat backrest 2 . )
Fold the seat backrest 2
on to the cushion.
)Straighten the seat backrest 2 and secure it. )Check that the red indicator, located next to
the control 1, is no longer visible.
Repositioning the seat backrest
When repositioning the seat backrest, take care not to trap the seat belts.
Page 374 of 384
16Practical information
Changing a fuse
)
To unclip the upper boot trim, pull it down, starting on the left.
)
Remove the trim by tipping it downwards.
)
Change the fuses.
To reassemble, carry out these operations in reverse order, starting at the back of the boot.
Fuse under the bonnet
(maxi-fuse)
Fuse N°
Rating
Functions
-
20 A
Soft top roof
-
20 A
Soft top roof
If the roof is in zone B
when a fuse fails, it is then not possible to open the boot. To be able to open the boot and proceed with fuse replacement,
first close the roof manually from inside the boot (by folding the rear seats).
There are three fuses for the soft top roof.
Fuses under the rear shelf
Fuse N°
Rating
Functions
MF08
40 A
Soft top roof
The maxi-fuses provide additional protection
for the electrical systems. All work on the
maxi-fuses must be carried out by a CITROËN
dealer or a qualified workshop.
