2014 CITROEN DS3 CABRIO tow

93Access

Starting the vehicle
)Inser t the key in the ignition switch.
The system recognises the star ting code. )Turn the key fully towards the dashboard toposition 3 (Starting).)When the engine star ts, release the key.
) Immobilise the vehicle.)
Turn the key fully towards you to
position 1 (Stop).)
Remove the key from the ignition switch.
Switching the vehicle off
Do not attach any heavy objects tothe key as this could weigh down on itwhen in the ignition switch and cause a fault.


Key reminder

If the key is left in the ignition switch, anaudible signal sounds when the driver's door is opened.

119Visibility
B. Rear wiper selection ring:
Rear wiper

If a significant accumulation of snow or ice is present, or when using a tailgate bicycle carrier, deactivate the automatic rear wiper via the multifunction screenconfiguration menu. park,
intermittent wi
pe,
wash-wipe
(set duration).
Reverse gear
When reverse gear is engaged, the rear wiper will come into operation if the windscreen wipers are operating.
Programming
The function is activated or deactivated via thevehicle configuration menu.
This function is activated b
y default.

Windscreen wash

Pull the wiper stalk towards you.
The windscreen wash, then the windscreen
wipers, operate for a pre-determined time.

1.Rear parcel shelff(see the following page for details) 2.Retaining strap3.Location for Hi- Fi amplifier
4.Stowing rings5.Storage box (version equipped with a
temporary puncture repair kit)(see the following page for details) or
Tool box (version equipped with a spare
wheel)(refer to the "Changing a wheel" section)












Boot fi ttings

141Child safety














Installing child seats attached with
the seat belt
In accordance with European regulations, this table indicates the options for installing child seats secured using a seat belt and universally approved (a)in accordance with the weight of the child and the seat in the vehicle.
Weight of the child and indicative age
SeatUnder 13 kg(groups 0 (b)and 0+)
Up to approx. 1 year
From 9 to 18 kg(group 1)1 to 3 years approx.
From 15 to 25 kg(group 2)
3 to 6 years approx.
From 22 to 36 kg(group 3) 6 to 10 years approx.
Front passen
ger seat (c)
with
height adjustment U(R)U(R)U(R)U(R)
Front passenger seat (c) withoutheight adjustment UUUU
Outer rear seats (d)UUUU
Centre rear seat (d)UUUU
(a)Universal child seat: child seat that can be installed in all vehicles using a seat belt.(b)
Group 0: from birth to 10 kg. Shells seats and baby carriers cannot be installed in the frontpassenger seat. (c)Consult the legislation in force in your country before installing your child on this seat.(d)To install a child seat on a rear seat, rear ward or forward facing, move the front seat forward,
then straighten the backrest to allow enough room for the child seat and the child's legs.U:
Seat suitable for the installation of a child seat secured using a seat belt and universally
approved, "rearward-facing" and/or "forward-facing".U(R): as for U
, with the passenger seat adjusted to its highest position and in the intermediate
lon
gitudinal position.
Remove and stow the head restraintbefore installing a child seat with abackrest on a passenger seat. Refit thehead restraint once the child seat has been removed.

Advice on child seats


The incorrect installation of a child seat in a vehicle compromises the child's protectionin the event of an accident.
Remember to fasten the seat belts or the child seat harness keeping the slackin relation to the child's body to a minimum , even for shor t journeys.
To install a child seat using the vehicle'sseat belt, ensure that the belt is welltightened on the child seat and that it holdsthe child seat firmly against the vehicle's seat. If your passenger seat is adjustable,move it forward if necessary.
For optimum installation of the "for ward facing" child seat, ensure that the back of the child seat is as close as possible tothe back of the vehicle's seat, in contact if possible.


Children at the front
The legislation on carrying a child on the front passenger seat is specific to each country.
Refer to the current legislation in your country.
Deactivate the passenger airbag when a "rearward facing" child seat is installed on the front seat. Otherwise the child risksbeing seriously injured or killed if the airbag is deployed.


Installation of a booster cushion

The chest par t of the seat belt must be positioned on the child's shoulder without
touching the neck.
Ensure that the lap part of the seat belt passes correctly over the child's thighs. CITROËN recommends the use of abooster seat which has a back, fitted with a seat belt guide at shoulder level.


As a safety precaution, do not leave:


- one or more children alone and unsuper vised in a vehicle,

- a child or an animal in a vehicle which is exposed to the sun, with the windowsclosed,

- keys within the reach of children insidethe vehicle. Use the "child lock" to prevent anyaccidental opening of the rear doors or windows.
Avoid opening the rear windows by more than a third.

To protect young children from the rays of the sun, fit side blinds on the rear windows.

You must remove the head restraint beforefitting a child seat on a passenger seat.Ensure that the head restraint is stowed or attached securely to prevent it from being thrown around the vehicle in the event of sharp braking. Refit the head restraint oncethe child seat has been removed

The incorrect installation of a child seatin a vehicle compromises the child's protection in the event of an accident.Follow strictly the advice given in the installation instructions provided with the child seat.
For information regarding the ISOFIX child seats which can be installed inyour vehicle, refer to the table showingthe locations for installing ISOFIX childseats.
To secure the child seat to the top tether:
- remove and stow the head restraint before installing the child seat on this seat (refit it
once the child seat has been removed),
- pass the child seat strap over the top o
f
the backrest of the seat, keeping it centred
between the head restraint apertures,
- secure the hook of the upper strap to the
ring B,- tighten the upper strap. When
fitting an ISOFIX child seat to the right
hand rear seat, before fixing the seat in place, first move the centre rear seat belt towards the
middle of the vehicle so as to not interfere with
the operation o
f the seat belt.

Installing ISOFIX
child seats
ISOFIX mountings.
In the case of the universal and semi-universal ISOFIX child seats, the child seat's ISOFIX size category, determined by a letter between Aand G , is
indicated on the child seat next to the ISOFIX logo.
IUF: seat suitable for the installation of an I sofix U niversal seat, "F
orward facing" and secured usingthe "TOP TETHER" upper strap. IL- SU:
seat suitable for the installation an I sofix S emi-U
niversal seat which is:
- "rear ward facing" fitted with a "Top Tether" upper strap or a stay,
- "forward facing" fitted with a stay,
- baby cot fitted with a "Top Tether" upper strap or a stay.
For the securing of the "Top Tether" upper strap, refer to the "ISOFIX Mountings" section.X: seat which is not suitable for the installation of an ISOFIX child seat or cot of the weight group
indicated.
Weight of the child and indicative age
Less than 10 kg(group 0)Up to 6 months approx
Less than 10 kg(group 0) Less than 13 kg (group 0+)Up to 1 year approx
From 9 to 18 kg (group 1)From 1 to 3 years approx
Type of ISOFIX child seatInfant car seat"rear facing""rear facing""for ward facing"
ISOFIX size categoryFGCDECDABB1
Universal and semi-universal ISOFIX child seats which can be installed on the outer rear seatsXXIL-SUXIL- SUIUFIL-SU
Remove and stow the head restraint before installing a child seat with abackrest on a passenger seat. Refit the head restraint once the child seat has been removed.

Direction indicators
Selection of the left or right direction indicators
to signal a change of direction of the vehicle. )Left: lower the lighting stalk beyond thepoint of resistance.
)Right: raise the lighting stalk beyond thepoint of resistance.
"Motorway" function
) Press briefly upwards or downwards,
without going beyond the point of
resistance; the direction indicators will
flash 3 times.










Hazard warning lamps
A visual warning by means of the direction
indicators to alert other road users to a vehicle
breakdown, towing or accident. )Press this button, the direction indicators
fl
ash.
They can operate with the ignition off.