2014 Citroen C4 AIRCROSS reset

1
43
Monitoring







Tr i p c o m p u t e r

With the ignition on, each press on the INFO

button displays the following screens in
succession:


- distance recorder and trip recorder A,

- distance recorder and trip recorder B,

- ser vice indicator,

- coolant temperature,

- range,

- average fuel consumption,

- average speed,

- current fuel consumption,

- setting menu,

- any alert messages.



Information display





Distance recorder

System for measuring the total distance
travelled by the vehicle during its life.
The total distance is
displayed in the lower part of
the screen.







Trip distance recorder
(Trip A or B)

Reset to zero

With the ignition on and either trip A
or B

displayed, press the INFO
button for more than
2 seconds. Only the trip displayed will be reset.


Each of these trip recorders
indicates the distance
travelled since the last reset.
Press the INFO
button to
display the desired trip.

44
Monitoring






Service indicator

System which informs the driver when the
next ser vice is due in accordance with the
manufacturer's ser vicing schedule.
The point at which the next ser vice is due is
calculated from the last ser vice indicator zero
reset.
It is determined by two parameters:


- the distance travelled (in miles (km)),

- the time elapsed since the last ser vice
(in months).
The distance remaining to be travelled may be
weighted by the time factor, depending on the
use made of the vehicle.

Example:
the screen indicates that 7300 miles
(kilometres) remain before the next service
is due.
Service overdue


Example:
the screen indicates that the ser vice
is overdue. This ser vice must be carried out by
a CITROËN dealer or a qualified workshop.


Operation

The symbol "--

"
remains displayed until
the first ser vice of a new vehicle has
been carried out. Each time the ignition is switched on, the
"ROUTINE MAINTENANCE REQUIRED"
symbol is displayed for a few seconds to indicate
that the ser vice must be carried out without delay. When the ignition is switched on, you must press
the INFO
button several times in succession
until the ser vice indicator is displayed. The
distance recorder display line indicates the
number of miles or kilometres remaining and
the time elapsed line indicates the number of
months remaining before the next ser vice is due.

1
45
Monitoring

Resetting the service indicator
to zero

After a certain distance and a certain
time, the display of "---

"
is reset
automatically and the display indicates
the time remaining before the next
ser vice is due.
Your CITROËN dealer or a qualified workshop
carries out this operation after each ser vice.
If you have carried out your vehicle's ser vice
yourself, the zero reset procedure is the
following:


)
switch off the ignition,

)
press the INFO
button several times in
succession until the ser vice indicator is
displayed,

)
press and hold the INFO
button for a few
seconds until the spanner flashes
,

)
press the INFO
button while the spanner
is flashing to change the display "---

"
to
"CLEAR"
then the time remaining before
the next service is due is displayed.

1
47
Monitoring

Average fuel consumption
(l/100 km or km/l or mpg)
This is the average fuel
consumption calculated
since the trip computer was
last reset.


Average speed
(km/h or mph)
This is the average speed
calculated since the trip
computer was last reset.


Current fuel consumption
(l/100 km or km/l or mpg)
This is the average fuel
consumption calculated over
the last few seconds.

This value may change following a
change in the style of driving or the relief.


If dashes "- - -" are displayed for long
periods in place of the digits while
driving, contact a CITROËN dealer or a
qualified workshop.




Resetting the information to zero

When the required information is displayed,
press the INFO
button for more than
two seconds to reset all of the information to
zero.
When the ignition is switched on, the zero reset
switches automatically from manual mode to
automatic mode.


Automatic

If the ignition key remains in the OFF position
for more than 4 hours, the information is reset
to zero automatically.

48
Monitoring
The various menus may change between
the type 1 instrument panel and the type 2
instrument panel.

Adjusting vehicle settings


When the vehicle is
stationary
, it allows the
user to change the following
settings:


- the reinitialisation
mode for average
fuel consumption and
average speed,

)
Press and hold the INFO
button for a few
seconds to display the menu screen.

)
In the menu screen, press the INFO
button
to select a function from the list:

- the fuel consumption units,

- the temperature display unit,

- the display language,

- activation/deactivation of the sound when
pressing the INFO
button,

- the break (rest) reminder display inter val,

- restore the factory settings.
To change the settings, you must stop
the vehicle and switch on the ignition.
Apply the parking brake and place the
gear lever in neutral.
With the ignition on
, press the INFO
button
on the dashboard, to the left of the instrument
panel, several times in succession until the
"SETTINGS MENU" screen is displayed.


Operation


MENU
1/3
:



- 1 - 2, A - M, A - P

* (choice of the type of
reset of average fuel consumption and
average speed),

- AVG UN I T
(choice of the fuel consumption
units),

- choice of the temperature display unit
,

- LANGUAGE
(option of the display
language),


*
According to display language.
For your safety, when the vehicle is
moving
, the function settings are not
displayed when you press the INFO

button.

1
49
Monitoring

MENU
2/3:



- a/b
(option of displaying a different
language in the instrument panel screen
and the navigation screen),

- activation / deactivation of the INFO

button sound
,

- ALERT
(changing of the "REST
REMINDER" display inter val),

- selection of the sound
of the direction
indicators,

- activation / deactivation of the current
fuel consumption
,
Press and hold the INFO
button for a
few seconds to return to the previous
screen.
When the menu screen is displayed,
if no operation is carried out within
15 seconds, the Settings Menu screen
is displayed.

MENU 3/3:



- RESET
(restore factory settings).




Choice of the reset mode for
average fuel consumption and
average speed
You can choose between two average fuel
consumption and average speed reset modes:


- automatic reset,

- manual reset.
In the menu screen:


)
press the INFO
button to select:

)
press and hold the INFO
button for a
few seconds to switch in succession from
reset mode 1
- A (automatic) *
to reset
mode 2 - M - P (manual) *
.
The mode selected is confirmed.



*
According to display language.

1
53 Monitoring
On the menu screen:


)
press the INFO
button to select "RESET"

(located in menu 2/2 or 3/3 depending
on the instrument panel)
:



Restoring factory settings
(RESET)
You can restore all of the factory settings for all
functions.

)
press and hold the INFO
button for at least
5 seconds
.
There is an audible signal and all of the factory
settings are restored for all functions.
In the menu screen:


)
press the INFO
button to select the current
fuel consumption activation / deactivation
symbol (located in menu 2/3)
:



Activation / deactivation of the
current fuel consumption *

You can activate or deactivate the display
of the current fuel consumption, with the
type 2 instrument panel only.

)
press and hold the INFO
button for a few
seconds to scroll through the choices in
succession (ON, OFF).



*
Depending on equipment.

In the menu screen:


)
press the INFO
button to select sound 1 or 2
(located in menu 2/3)
:





Selection of the sound
for the direction indicators
You can select the sound for the direction
indicators, with the type 2 instrument panel only.

279
05

Press the AUDIO
button.
By default the screen displays the stations on FM1.


Selecting an FM station and presetting


Press SEEK TRACK
for a manual search up or
down. The frequency is modifi ed in step of 0.1 MHz.
Press and hold to fi nd a station automatically.
Press " Scan
" to search for stations that can be
received in the current location, until a station is
found.

You can also start a search by type of programme by
pressing " PTY Filter
".
Press " RDS Settings
".

Press " On
" or " Off
" to activate or deactivate the
functions:


- " AF Check
": automatic search for the best
frequency,

- " Reg
": switch to the regional frequencies.



Once the frequency has been selected, a long press
on the station until a "Beep" is heard will preset it.
The name of the station is displayed if it is available.



RDS settings


Press the AUDIO
button.
By default the screen displays the stations on FM1.

Turn the FOLDER / TUNE SOUND
knob to select a
station.

RADIO