Page 249 of 368
247
BLUETOOTH ®
TELEPHONE
WITH VOICE RECOGNITION
For reasons of safety and because the sustained attention of the
driver is needed, operations of matching a Bluetooth ® mobile phone
with the audio system's hands-free function must be done with the
vehicle stationary
.
The systems says " Please say the 4 digits of a pairing cod
e
".
Press this button.
The system confi rms the validity of the number spoken,
answer " Ye s
".
Say " No
" to return to step 7.
Say " Pairing options
".
Pairing a Bluetooth ®
telephone
First connection
Say " Pair a telephone
".
Say " Confi gure
".
The system can register up to 7 Bluetooth
®
compatible mobile
telephones.
The telephone which has the highest level of priority is connected
automatically.
The system says " Do you wish to
pair
a telephone, delete a
telephone or obtain the list of paired telephones?
".
Say a 4-digit number which will be recorded as the pairing
code.
Remember this pairing code as you must enter it in the telephone in
one of the following steps of the matching procedure.
Page 250 of 368
248
Consult your mobile telephone's user manual and enter
the pairing code recorded in step 7 in the telephone.
BLUETOOTH ®
TELEPHONE
WITH VOICE RECOGNITION
The system says " Start the
pairing
procedure on the telephone.
Consult the instructions in the telephone manual
".
If the code is incorrect, the system locks. To clear the code:
- check that the telephone's voice recognition is not activated,
- with the ignition on and the audio system active, press the END
CALL button for 2 seconds, 3 times in succession.
When it detects a Bluetooth
®
compatible mobile telephone,
the system says " Please say the name of the telephone after
the beep
".
After the audible signal, allocate a name to the telephone
by saying the name of your choice.
The system says " Allocate an order of priority between 1 and 7.
One is the highest level of priority
".
Give a number between 1 and 7 to establish the level of
priority of the mobile telephone.
The system says and confi rms the " name of the telephone
" and
the " number
" of its priority.
Answer " Ye s
".
Say " No
" to return to step 13.
The systems says " Pairing complete
" then emits an audible signal
and deactivates the voice recognition.
The services available depend on the network, the SIM card and the compatibility of the Bluetooth
®
telephone used. Check in your telephone
user manual and with your service provider for the services you have access to.
If the system does not detect the Bluetooth
®
compatible mobile
telephone, the matching process stops ands is accompanied by an
audible signal.
If you select a level of priority which has already been allocated to
another telephone, the system asks you if you wish to replace this
level of priority.
Page 254 of 368
252
BLUETOOTH ®
TELEPHONE
WITH VOICE RECOGNITION
The telephone ring is sent to the speaker by the front passenger's
seat.
If an audio source (CD, radio, ...) is in operation when the call is
received, it is placed on MUTE and only the incoming call is heard.
When the ignition switch is in the ACC or ON position, the audio
system is activated automatically if an incoming call is received,
even if it was originally off.
At the end of the call, the audio system returns to its previous state.
Redial the last number called
Press this button.
Say " Redial
".
Receiving a call
Press this button.
Page 257 of 368
255
TOUCH SCREEN AUDIO-TELEMATIC
system
The system is protected in such a way that it will only
operate in your vehicle.
01 First steps - Control panel
For safety reasons, the driver must carry out operations
which require prolonged attention while the vehicle is
stationary.
When the engine is switched off and to prevent
discharging of the battery, the system switches off
following the activation of the energy economy mode.
CONTENTS
03 General operation
04 Navigation
05 Media
06 Settings
07 Information p.
p.
p.
p.
p.
p.
p. 256
257
259
260
274
286
288
02 Steering mounted controls
p.
292
08 BLUETOOTH
®
streaming - telephone
Page 258 of 368
256
01
PWR/VOL
:
- audio system on/off.
- volume adjustment for the audio and
telephone functions.
Short press: change the audio source.
Long press: CD / MP3 / USB, SD, for fast
forward or back.
Long press: RADIO, automatic frequency
search down/up.
FOLDER
: allows selection of a folder or a
manual search for a radio station.
OPEN
: opens the screen and
gives access to CD and SD cards.
A second press closes the screen.
ZOOM
: zoom the map in or out.
Allows the colour map screen the be switched
between day and night mode according to the
state of the vehicle's lighting.
Move a fi nger over the screen to operate
the system.
Use the buttons offered on the screen.
For safety reasons, the driver
must only carry out operations
which require prolonged
attention with the vehicle
stationary.
Insert the SD card containing
the navigation mapping data into
the left hand slot.
Insert the SD card containing
the audio data into the right
hand slot.
FIRST STEPS
Page 259 of 368
257
02
Increase / reduce audio volume.
Search for a higher / lower radio frequency.
Previous/next CD track.
CD fast forward/back.
Long press: audio system on / off.
Short press: selection of the source in the
following order (in a loop):
CD, SD, USB/iPod, Bluetooth, AUX, FM,
MW, LW.
STEERING MOUNTED CONTROLS
Page 261 of 368
259
03
Description of the controls - Menus
SETTINGS
: used to manage the
different adjustments.
DESTINATION
: used to set
navigation options and select the
destination.
NAVI MENU
: used for adjustments
to the navigation system.
MODE
: used to select the audio
source.
INFO:
used to check information.
AUDIO
: display the screen for the
last audio source used.
MAP
: used to display the current
position of your vehicle on the map.
GENERAL OPERATION
Page 279 of 368
277
Level 1
Level 2
Level 3
Comments
CD Repeat
Press to play the track repeatedly.
Scan
Press to play the start of each track for around 9 seconds.
Random
Press to play the tracks in random order.
Playback
Press to start play of the selected track.
Go Up 1 Level
Press to go up one level.
Go to ROOT
Press to open the folder structure.
SD Repeat
Press to play the track repeatedly.
Scan
Press to play the start of each track for around 9 seconds.
Random
Press to play the tracks in random order.
Playback
Press to start play of the selected track.
Go Up 1 Level
Press to go up one level.
Go to ROOT
Press to open the folder structure.
USB/iPod Repeat
Press to play the track repeatedly.
Scan
Press to play the start of each track for around 9 seconds.
Random
Press to play the tracks in random order.
Playback
Press to start play of the selected track.
Bluetooth Audio Repeat
Press to play the track repeatedly.
Scan
Press to play the start of each track for around 9 seconds.
Random
Press to play the tracks in random order.
Track
Press to start play of the selected track.
AUX Repeat
Press to play the track repeatedly.
Scan
Press to play the start of each track for around 9 seconds.
Random
Press to play the tracks in random order.
Playback
Press to start play of the selected track.
Go Up 1 Level
Press to go up one level.
Go to ROOT
Press to open the folder structure.
