2014 CITROEN C-ELYSÉE display

.
.
Contents
Instrument panel 22
Indicator and warning lamps 23
Ser vice indicator 32
Distance recorders 34
Setting the date and time 35
Tr i p c o m p u t e r 36
Monochrome screen C(Audio system / Bluetooth) 38
Monitoring Familiarisation
Remote control key 42
Alarm 46
Doors 48
Boot 49
Windows 51
Fuel tank 52
Misfuel prevention (Diesel) 53
Access
Front seats 55
Rear seats 57
Mirrors 58
Steering wheel adjustment 60
Ventilation 61
Heating 63
Manual air conditioning(without display screen) 63
Electronic air conditioning (with screen) 65
Front demist - defrost 68
Rear screen demist - defrost 69
Comfort
Starting - stopping the engine 75
Manual parking brake 76
Manual gearbox 77
Electronic gearbox 78
Automatic gearbox 82
Speed limiter 85
Cruise control 87
Rear parking sensors 89
Driving
Lighting control 91
Headlamp adjustment 96
Wiper control 97
Courtesy lamps 99
Visibility Eco-driving
Interior fi ttings 70
Boot fi ttings 73
Fittings

.
7
Familiarisation
Interior

Electronic air conditioning (with screen)
This system, equipped with a display screen, provides you with optimum control of temperature
and air circulation in the passenger compartment.

Speed limiter / Cruise control

These two systems allow you to control thespeed of your vehicle according to a value you have set.


Audio and communication
systems
These systems benefit from the latest
technology: MP3 compatible audio systems, USB player, Bluetooth hands-free system,
auxiliary inputs, ...
6
5
85, 87
205 17
5
Audio system Audio s
ystem / Bluetooth

.
17
Familiarisation
Driving safely


Electronic gearbox


Five-speed electronically controlled gearbox
offering the choice of the comfor t of automated
operation or the pleasure of manual gear changing.1. Gear lever.

Display in the instrument panel
The gear engaged or the driving mode selected appears in the instrument panel screen. N.Neutral.R.
Reverse.
1 to 5. Gears engaged. AUTO.Automated mode.


Moving off
)
Select position N.)
Press firmly on the brake pedal. )
Start the engine.)
Select the automated mode (position A
) Aor manual mode (position M ) by moving
the gear lever 1,
or
engage reverse by pushing the gear
lever 1 to position R . )
Release the parking brake. )
Progressively take your foot off the brake
pedal: the vehicle moves off.
7
8

18
Familiarisation
82
Driving safely
Automatic gearbox
Four-speed gearbox offering the choice of the comfor t of automatic operation or the pleasure
of manual gear changing.1. Gear lever.2."S"
(sport) button.3."7"
(snow) button.


Display in the instrument panel

The gear engaged or the driving mode selected
appears in the instrument panel screen.P.Park. R. Reverse.
N.Neutral.D.Drive (automatic forward drive).
S.Sport programme. 7Snow
programme.
1 to 4. Gears engaged.-.
Invalid value in manual operation.


Moving off
)Apply the parking brake. )Select position P
or N.)Start the engine.)Press the brake pedal. )Release the parking brake. )Then select position R
, D
or M
. )Progressively take your foot off the brake pedal: the vehicle moves off.

.
19
Familiarisation
Driving safely
1.
Selection of limiter mode. 2.Reducing the programmed value. 3.Increasing the programmed value. 4.
Limiter On / Off.


Speed limiter "LIMIT"
85
1.Selection of cruise control mode.
2. Reducing the programmed value.3.
Increasing the programmed value.4.
Cruise control On / Off.
Cruise control "CRUISE"
87 The cruise control or speed limiter mode
appears in the instrument panel when selected.

Display in the instrument
panel
Cruise control
S
peed limiter
The settings must be made with the engine running.To be programmed or activated, the speed of
the vehicle must be above 25 mph (40 km/h),with at least 4thengaged for a manual gearbox (2 nd for an electronically controlled or automatic gearbox).

22
Monitoring

















Instrument panel for petrol - Diesel
1.
Rev counter (x 1 000 rpm). 2.
Screen. 3.Speedometer (km/h).
A.Electronic or automatic gearbox
information.B.Time.C.Range (km) or
Tr i p d i s t a n c e r e c o r d e r.
D. Fuel gauge.E.
Ser vice indicator (km) then,

total distance recorder.
These two
functions are displayedsuccessively when switching on the ignitionF.Speed limiter or cruise control settings.
4.Reminder of service information
Reset the selected function to zero (trip
distance recorder or ser vice indicator)
Adjust the time.
Dials

Screen

32
Monitoring





Service indicator


More than 1800 miles (3 000 km)remain before the next service is due

When the ignition is switched on, no ser vice
information appears in the screen. S
ystem which informs the driver when the next ser vice is due, in accordance with the manufacturer's servicing schedule.The point at which the ser vice is due is calculated from the last indicator zero reset. It
is determined by two parameters:
- the distance travelled,
- the time elapsed since the last ser vice.

Between 600 miles (1 000 km)and 1800 miles (3 000 km) remainbefore the next service is due

For a few seconds after the ignition is switched
on, the spanner symbolising the service
operations comes on. The distance recorder
display line indicates the distance remainingbefore the next service is due.Example: 1 700 miles (2 800 km) remainbefore the next service is due.
For a few seconds after the ignition is switched
on, the screen indicates:
A
few seconds after the ignition is switched on, the spanner goes off; the distance recorder fresumes its normal operation. The screen then
indicates the total and trip distances.


Less than 600 miles (1 000 km)remain before the next service is due
Example:560 miles (900 km) remain before
the next service is due.
For a few seconds after the i
gnition is switched
on, the display indicates:

A few seconds after the ignition is switched
on, the distance recorder resumes its normaloperation. The spanner remains on
toindicate that a service must be carried out soon.

1
33
Monitoring
For a few seconds after the ignition is switchedon,the spanner flashes
to indicate that the ser vice must be carried out as soon as possible.
Example:
the ser vice is overdue by 18 0 miles (300 km).
For a few seconds after the ignition is switched
on, the display indicates:
The distance remaining may be weighted by the time factor, depending on the driver's driving habits.
Therefore, the spanner may also come
on if you have exceeded the two year service interval.

Following this operation, if you wish to disconnect the battery, lock the vehicleand wait at least five minutes for the zero reset to be taken into account.
Service indicatorzero reset

After each ser vice, the ser vice indicator mustbe reset to zero.
The procedure for resetting to zero is as
follows:) switch off the ignition, )
press and hold the trip distance recorder zero reset button,
)
switch on the ignition; the distance recorder
display begins a countdown,
) when the display indicates "=0"
, release
the button; the spanner disappears.

Retrieving the serviceinformation

You can access the service information at
any time.
) Press the trip distance recorder zero reset button.
The ser vice information is displayed for a
few seconds, then disappears.

A few seconds after the ignition is switched
on, the distance recorder resumes its normal
operation. The spanner remains on.