2014 CITROEN C-ELYSÉE display

03
212
AUDIO

CD


INFORMATION AND ADVICE
On a given disc, the CD player can read up to 255 MP3 fi les spread
over 8 levels. However, it is advisable to keep to a limit of two levels to
reduce the access time be
fore the CD is played.
The
folder structure is not observed during playback.
In order to be able to pla
y a recorded CDR or CDRW, when recordingit is preferable to select standards ISO 9660 level 1. 2 or Joliet.
If the disc is recorded in another format, it ma
y not be played correctly.
It is recommended that the same recording standard is always usedfor a given disc, with as low a speed as possible (4x maximum) for
optimum sound quality.
In the particular case o
f a multi-session CD, the Joliet standard is
recommended.
The audio s
ystem can only play fi les with ".mp3", ".wma" or ".wav"extensions.

A high compression level can degrade the sound quality.

Pla
ylists accepted are types .m3u and .pls.
The s
ystem can recognise up to 5 000 fi les in 500 folders on 8 levels.
It is advisable to restrict fi le names to 20 characters without usin
gspecial characters (e.g. " ? ; ù) to avoid any playing or displaying problems.

03
213
CD
AUDIO


PLAYING A COMPILATION

Insert an MP3 compilation on the
CD player.
The s
ystem constitutes playlists (in temporary memory) which maytake between a few seconds to several minutes.
To play a disc already inserted, press
SRC/BAND several times in successionuntil "CD"
is displayed.

Pr
ess one of the buttons to select the previous or next track.

Pr
ess one of the buttons to select the previous or next folder depending on theclassifi cation selected.

Pr
ess and hold one of the buttons for
fast forward or backward.

03
214
Select a line in the list.
Jump a page.
Go back one level.
Select a folder /Playlist.
Start play of the track selected.
AUDIO
Go back to the fi rst level to select the track classifi cation:
-
By Folders
: all folders containing audio fi les recognised on the peripheral, in alphabetical order, ignoring the folder structure.
- By Playlis
t
: depending on the playlists saved. Pr
ess LISTto display the compilation
folder structure.

04
217
Press ‘to display the audio settings menu.

The settings available are:


- AMBIAN
CE,

- BA
SS,

- TREBLE,

- L
OUDNESS,

- BALANCE
,


- AUTO VOLUME.

The AMBIANCE, TREBLE and BASS settin
gs are different and
independent for each sound source.

Select the settin
gs to adjust.
Ad
just the setting then confi rm by
pressing OK.
AUDIO SETTINGS

05
218
MENUMAIN FUNCTION
Option A1

Option A2 OPTION
A
OPTION B ...
Radio
Traffi c TA
RD
S
R
adio Text
Media
Play
Normal
R
andom
Displaying
Scroll text 1
2
2
2
1
2
3
3
1
21
2
2
1

Random all
Re
peat
3
3
Unit
Celsius
F
arhenheit
1
2
2
SCREEN MENU MAP
Radio Text 2
Language1

220
FREQUENTLY ASKED QUESTIONS
QUESTIONANSWER SOLUTION
The quality of receptionof the radio station
listened to graduallydeteriorates or the stored stations do not function(no sound, 87.5 MHz is
displayed...). The vehicle is too
far from the transmitter used by the station listened
to or there is no transmitter in the geographical area through which the
vehicle is travelling.
Switch on the RDS function to enable the system
to check whether there is a more powerful
transmitter in the geographical area.
The environment
(hills, buildings, tunnels, basement car parks...) block reception, including in RDS mode. This phenomenon is normal and does not indicate
a failure of the audio equipment.
The aerial is absent or has been dama
ged (for example when goingthrough a car wash or into an underground car park). Have the aerial checked by a CITROËN dealer.

Sound cut-outs of 1 to
2 seconds in radio mode.During this brief sound cut-out, the RDS searches for any frequency
permitting better reception of the station. Switch off the RDS function if the phenomenon is
too frequent and always on the same route.
Th
e traffi c announcement(TA) is displayed. I donot receive any traffi c
information.Th
e radio station does not broadcast traffi c information. Tune to a radio station which broadcasts traffi c
information.
Th
e stored stations arenot found (no sound, 87.5 MHz is displayed...). An in
correct waveband is selected. Press the SRC button to return to the waveband (AM, FM1, FM2) on which the stations are stored.

221
FREQUENTLY ASKED QUESTIONS
QUESTIONANSWER SOLUTION
The CD is ejected
automatically or is not played by the player. The
CD is inserted upside down, is unplayable, does not contain any audio data or contains an audio format which the player cannot play.
The CD is protected b
y an anti-pirating protection system which is not recognised by the audio equipment.
-
Check that the CD is inserted in the player the
right way up.

-
Check the condition of the CD: the CD cannot
be played if it is too damaged.

-
Check the content in the case of a recordedCD: consult the advice in the "Audio" section.

- The audio s
ystem's CD player does not play
DVDs.

- Due to their qualit
y level, certain writeableCDs will not be played by the audio system.
The CD pla
yer sound ispoor.The CD used is scratched or of poor quality. Insert good quality CDs and store them in suitable conditions.
The audio settin
gs (bass, treble, ambiance) are unsuitable. Set the treble or bass level to 0, without selectingan ambiance.
In "Random all" pla
y,not all of the tracks areplayed.In "Random all" pla
y, the system can only take into account up to 999 tracks.
With the engine o
ff, the
audio system switches off after a few minutes of use. When the engine is switched o
ff, the audio system operating time
depends on the battery charge.
The switch-o
ff is normal: the audio system switches to economy mode and switches off to prevent discharging the vehicle's battery.
Start the vehicle's engine to increase the batterycharge.
The messa
ge "the audio system is overheated"
appears on the display. In order to protect the installation if the surroundin
g temperature is toohigh, the audio system switches to an automatic thermal protection mode leading to a reduction of the volume or stopping of the playing of the CD. Switch the audio s
ystem off for a few minutes to
allow the system to cool.

7
7
C-ELYSEE_EN_CHAP07_SECURITE_ED01-2014
Safety
Before reinitialising the system, ensure that the pressures of the four tyres are correct for the use of the vehicle and in line with the recommendations on the tyre pressure label. The under-inflation detection system does not give a warning if a pressure is incorrect at the time of reinitialisation.
The loss of pressure detected does not always cause visible bulging of the tyre. Do not satisfy yourself with just a visual check.
The alert is maintained until the system is reinitialised.
Under-inflation alert
This is given by fixed illumination of this warning lamp, accompanied by an audible signal and the display of a message.
 Reduce speed immediately, avoid excessive steering movements and sudden braking  Stop the vehicle as soon as it is safe to do s o .
 If you have a compressor (such as the one in the temporary puncture repair kit), check the pressures of the four tyres when cold. If it is not possible to carry out this check straight away, drive carefully at reduced speed. o r  In the event of a puncture, use the temporary puncture repair kit or the spare wheel (depending on equipment),
Reinitialisation
It is necessary to reinitialise the system every time one or more tyre pressure is adjusted, and after changing one or more wheels. A label attached to the middle pillar, driver's side, gives a reminder of this.