2014 CITROEN C-ELYSÉE engine

63
3
Comfort
1. Temperature level adjustment
) Turn the control knob from
blue (cold) to red (hot) to
adjust the temperature to your
re
quirements.This s
ystem only operates with the engine running.


2. Air fl ow adjustment
)Turn the control knob from position 1
to position 4to obtaina comfortable air flow.



If you put the air flow control in position 0(system off), the temperature is no longer controlled. However,a slight flow of air can still be felt, resulting from the movement of the vehicle.

Manual air conditioning
(without display screen) Heating / Ventilation

This system only operates when the engine is running.

65
3
Comfort
Electronic air conditioning (with screen)
These systems only operate with the engine running.


1. Air intake / Air recirculation

The recirculation of interior air isolates the passenger compartment from exterior odours and smoke.


2. Temperature level adjustment
)Press the "
" (red for hot)and"" (blue for cold) buttons, to
adjust the temperature to your
requirements. The temperature bars come on
or go off progressively in the air conditioning screen.
Return to exterior air intake as soon as possible
to prevent deterioration of the the air qualit
y and the formation of mist. )Press the button to recirculate the interior air. The indicator lamp comes on to confirm
this.
) Press the button again to permit
the intake of exterior air. Theindicator lamp goes off to confirm
thi
s.

3. Front demist - defrost
See the corresponding section.

69
3
Comfort

















Rear screen demist - defrost
The control button is located on the heating / ventilation or air conditioning system controlpanel.


Switching on

The rear screen demisting/defrosting can onlyoperate when the engine is running.)Press this button to demist/defrost the rear screen and (depending on version) the door mirrors. The indicator lamp associated with
the button comes on.

Switching off
The demisting/defrosting switches off automatically to prevent an excessive consumption of current.)
It is possible to stop the demisting/defrosting operation before it is switched
off automatically by pressing the button
again. The indicator lamp associated with
the button goes off. )
Switch off the demisting/defrosting of the rear screen and door mirrors, if fitted,
as soon as appropriate, as lower currentconsumption results in reduced fuelconsumption.



Heated lower windscreen *

In cold conditions, the heated rear window switch also allows the lower windscreen to beheated, so as to free the wiper blades whenfrozen to the glass by frost or snow.


The function is active when the ambient temperature is below 0°C.


*
Depending on country of sale.

75
5
Driving








Starting - stopping the engine
)Inser t the key in the ignition switch.
The system recognises the star ting code. )Turn the key fully towards the dashboard toposition 3 (Starting).)When the engine star ts, release the key.

Starting


A heavy object (key fob...), attached to the key and weighing down on its shaft in the ignition switch, could cause amalfunction.
Key left in the "Ignition on"position
On opening the driver's door, an aler t message is displayed, accompanied by an audible signal, to remind you that the key isstill in the ignition switch at position 1 (Stop).
)
Immobilise the vehicle.)
Turn the key fully towards you to
position 1 (Stop).)
Remove the key from the ignition switch.
Switching off

If the key has been left in the ignitionswitch at position 2 (Ignition on),the ignition will be switched off automatically after one hour.
To switch the ignition back on, turn the key to position 1 (Stop)
, then back toposition 2 (Ignition on).

77
5
Driving
Only engage reverse gear when the vehicle is stationary with the engine at idle.
As a safety precaution and to facilitate star ting of the engine:


- always select neutral,

- press the clutch pedal.









Manual gearbox
)Push the gear lever fully to the right thenbackwards.


Engaging reverse gear

78
Driving

Gear lever















Electronic gearbox


Displays in the instrument panel


Gear lever positions
N.NeutralR.Reverse
1 2 3 4 5.Gears in manual mode.
AUTO. This comes on when automated mode
is selected. It goes off when changing to
manual mode.
R. Reverse ) With your foot on the brake, move the lever for wards to select this position.N.Neutral. )
With your foot on the brake, select this
position to start the engine.
A . Automated mode.) Move the lever backwards to select this
mode. M + / -.Manual mode with sequential gear changing.)
Move the lever backwards, then to the left
to select this mode, then:


- push for wards to change up a gear,

- or push backwards to change down a gear.
Five-speed electronicall
y controlled gearbox
which offers a choice between the comfort of automated operation or the pleasure of manualgear changing.
Tw o d r i v i ng modes are offered: -automatedmode for automatic control
of the gears by the gearbox, without anyaction by the driver,- manualmode for the sequential changingof the gears by the driver, using the gear lever.
)Place your foot on the brakewhen this warning lamp flashes (e.g.: star ting the engine).

79
5
Driving
N
appears in the instrument panel.
N
flashes in the instrument panel screen if the gear lever is not in position Nwhen starting.


You must keep your foot on the brakepedal while star ting the engine.
The vehicle then moves off on itsown (refer to the paragraph "Creepfunction").
)
Select automated mode (position A
), A
manual mode (position M ) or reverse (position R
) R
AUTO
and 1
, 1
or R
appear in the
instrument panel.
) Release the parking brake.)
Progressively take your foot off the brake
pedal.

Moving off
)Select position N.
)Press the brake pedal fully.)Star t the engine.
Do not press the brake and clutch pedals simultaneously. This can cause rapid clutch wear.


The creep function may be temporarilyunavailable if the clutch temperature istoo high or the slope too steep.



Do not leave children unsuper visedinside the vehicle when the engine is running.
)
Accelerate away.


Creep function

This function allows the vehicle to be
manoeuvred more easily at low speeds (when
parking, in traffic jams...).
With the gear lever in position A, Mor R, the
vehicle moves as soon as you take your foot off the brake pedal, at low speed andwith the engine at idle.

80
Driving
Automated mode
AUTOand the gear engaged appear in the instrument panel.

Manual mode
The gears engaged appear insuccession in the instrument panel.
The
gearbox then operates in auto-adaptive mode, without any action on the par t of thedriver. It continuously selects the most suitable gear taking account of:
- optimisation of fuel consumption,
- driving style,
- road conditions,
- v
ehicle load.
For optimum acceleration, when over takinganother vehicle for example, press theaccelerator pedal fully down, beyond the point of resistance. The
gear change requests are only carried out
i
f the engine speed permits.
It is not necessary to release the accelerator
pedal during gear changes.
When braking or slowing down, the gearbox changes down automatically so that the vehicle
picks up in the right gear.
Under full acceleration, the change up will not
take place unless the driver operates the gear lever (unless the engine is close to its maximum
speed).

Never select neutral (position N ) when moving.



You can change mode at any time bymoving the gear lever from Ato Mor the other way round.
Never select neutral (position N) whenmoving.
You can change mode at any time by moving the gear lever from A
to M
or the other way round.
)Select position A.)
Select position M.


Reverse
To engage reverse, the vehicle must be
immobilised with
your foot on the brake.)Select position R.

At low speed, if reverse gear is requested, the Nwarning lamp flashes and the gearbox goes
into neutral automatically.
To e n
gage reverse, put the gear lever intoposition N, then to position R
.


There is an audible signal onengagement of reverse.