2014 CHEVROLET SONIC ECU

[x] Cancel search: ECU

Page 96 of 400

CHEVROLET SONIC 2014 2.G Owners Manual Black plate (48,1)Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S./Canada-6081473) -
2014 - 2nd Edition - 8/19/13
3-48 Seats and Restraints
5. Pull the shoulder belt all the wayout of the retractor

Page 98 of 400

CHEVROLET SONIC 2014 2.G Owners Manual Black plate (2,1)Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S./Canada-6081473) -
2014 - 2nd Edition - 8/19/13
4-2 Storage
Luggage/Load
Locations
Load Compartment
(Hatchback)
The load compartment

Page 122 of 400

CHEVROLET SONIC 2014 2.G Owners Manual Black plate (22,1)Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S./Canada-6081473) -
2014 - 2nd Edition - 8/19/13
5-22 Instruments and Controls
For vehicles with cruise control, the
cruise control l

Page 174 of 400

CHEVROLET SONIC 2014 2.G Owners Manual Black plate (32,1)Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S./Canada-6081473) -
2014 - 2nd Edition - 8/19/13
7-32 Infotainment System
Pairing Information
.A Bluetooth phone with MP3
capability

Page 176 of 400

CHEVROLET SONIC 2014 2.G Owners Manual Black plate (34,1)Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S./Canada-6081473) -
2014 - 2nd Edition - 8/19/13
7-34 Infotainment System
If a Bluetooth device was previously
connected, the infotai

Page 221 of 400

CHEVROLET SONIC 2014 2.G Owners Manual Black plate (13,1)Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S./Canada-6081473) -
2014 - 2nd Edition - 8/19/13
Driving and Operating 9-13
If you put things inside the
vehicle—like suitcases, to

Page 255 of 400

CHEVROLET SONIC 2014 2.G Owners Manual Black plate (5,1)Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S./Canada-6081473) -
2014 - 2nd Edition - 8/19/13
Vehicle Care 10-5
3. Lift the hood and release thehood prop from its retainer,
locate

Page 265 of 400

CHEVROLET SONIC 2014 2.G Owners Manual Black plate (15,1)Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S./Canada-6081473) -
2014 - 2nd Edition - 8/19/13
Vehicle Care 10-15
1.8L L4 Engine
1. Remove the two screws, tilt the cover, and slid