4
Remote Keyless Entry Transmitter (Key Fob)
F Optional equipment
Unlock
Press to unlock the driver’s door.
Press again to unlock all doors.
Lock
Press to lock all doors. The
driver’s door will not lock
when open if the Unlocked
Door Anti Lock Out feature
is turned on. See the Vehicle
Settings menu.
Vehicle Locator/
Panic Alarm
Press and release to locate
your vehicle. The turn signal
lamps will flash and the horn will
sound.
Press and hold to activate the
alarm. The turn signal lamps will flash
and the horn will sound until the button is
pressed again or the ignition is turned on.
Trunk Release
Press and hold to unlock the trunk.
Adaptive Remote Vehicle StartF
Press and release the Lock button and
then press and hold the button until the
turn signal lamps flash to start the engine
from outside the vehicle. After entering the vehicle, turn on the ignition using the key or ENGINE STOP/START
button
F.
• During a remote start, the
engine will run for 10 minutes.
• Press and hold the
button
until the parking lamps turn off
to cancel a remote start.
Note: To change the remote lock,
unlock, and remote start settings, go to Remote Lock, Unlock, Start in the
Vehicle Settings menu.
If the remote start heated seat option is
selected, the heated seat button indicators
will not illuminate and the temperature of the
unoccupied heated seat may be reduced during
the remote start. The heated seat turns off
when the ignition is turned on.
See Keys, Doors and Windows in your Owner Manual.
Door Locks/Trunk Release
Door Locks
To lock or unlock all doors, press the power door Lock/ Unlock button, located on
the interior panels of the front doors.
Note: To change the lock and unlock setting, go to Power Door Locks in the Veh\
icle Settings menu.
To open a locked door from inside, pull the inside door handle to unlock\
the door and
then pull the door handle again to open the door.
Trunk Release
To open the trunk, with the vehicle unlocked, press the Trunk Release button on
the driver’s door, press the touchpadF above the license plate or use the Trunk
Release button on the key fob.
See Keys, Doors and Windows in your Owner Manual.
17
Driver Assistance Systems
The driver assistance systems use advanced technologies to help avoid collisions by
providing visual and audible alerts under some imminent collision conditions.
Forward Collision Alert
F – When approaching a vehicle directly ahead too quickly, the
system flashes a visual alert and pulses the Safety Alert SeatF. See Safety Alert Seat.
To set the alert timing to Far, Medium, or Near, press the Collision Alert button
or the Follow Distance Gap button on the left side of the steering wheel.
Lane Departure Warning
F – When crossing a detected lane marking without using a turn
signal, the system flashes a visual alert and pulses the left or right side of the Safety Alert
Seat♦. See Safety Alert Seat.
To turn the system on or off, press the Lane Departure Warning button on the
center of the instrument panel.
Side Blind Zone Alert/Lane Change Alert
F – While driving, the Side Blind Zone Alert/
Lane Change Alert displays a warning symbol on the left or right side mi\
rror when a vehicle
is detected in that side blind zone area or rapidly approaching that sid\
e blind zone area.
The warning symbol flashes if a turn signal is activated when a vehicle has been detected.
To turn the system on or off, go to Collision/Detection Systems > Side Blind Zone Alert
in the Vehicle Settings menu.
Rear Parking Assist
F – During low-speed parking maneuvers, the Rear Parking Assist
system displays a caution symbol on the Rear Vision Camera when an object is detected.
One beep sounds or the Safety Alert Seat pulses when an object is first detected and five
beeps sound or the Safety Alert Seat pulses when an object is very close\
.
To turn the system on or off, press the Parking Assist button on the center of the
instrument panel.
Safety Alert Seat
F – Subtle driver’s seat pulses, left or right, or simultaneously, \
alert the
driver of potential hazards.
Note: Audible notification may be selected instead of Safety Alert Seat pulsing notification. To change
the alert setting, go to the Collision and Detection menu in the Vehicle\
Settings.
See Driving and Operating in your Owner Manual.
F Optional equipment
