2014 BUICK LACROSSE ignition

4
Remote Keyless Entry Transmitter (Key Fob)
F Optional equipment
Unlock
Press to unlock the driver’s door.
Press again to unlock all doors.
Lock
Press to lock all doors. The
driver’s door will not lock
when open if the Unlocked
Door Anti Lock Out feature
is turned on. See the Vehicle
Settings menu.
Vehicle Locator/
Panic Alarm
Press and release to locate
your vehicle. The turn signal
lamps will flash and the horn will
sound.
Press and hold to activate the
alarm. The turn signal lamps will flash
and the horn will sound until the button is
pressed again or the ignition is turned on.
Trunk Release
Press and hold to unlock the trunk.
Adaptive Remote Vehicle StartF
Press and release the Lock button and
then press and hold the button until the
turn signal lamps flash to start the engine
from outside the vehicle. After entering the vehicle, turn on the ignition using the key or ENGINE STOP/START
button
F.
• During a remote start, the
engine will run for 10 minutes.
• Press and hold the
button
until the parking lamps turn off
to cancel a remote start.
Note: To change the remote lock,
unlock, and remote start settings, go to Remote Lock, Unlock, Start in the
Vehicle Settings menu.
If the remote start heated seat option is
selected, the heated seat button indicators
will not illuminate and the temperature of the
unoccupied heated seat may be reduced during
the remote start. The heated seat turns off
when the ignition is turned on.
See Keys, Doors and Windows in your Owner Manual.
Door Locks/Trunk Release
Door Locks
To lock or unlock all doors, press the power door Lock/ Unlock button, located on
the interior panels of the front doors.
Note: To change the lock and unlock setting, go to Power Door Locks in the Veh\
icle Settings menu.
To open a locked door from inside, pull the inside door handle to unlock\
the door and
then pull the door handle again to open the door.
Trunk Release
To open the trunk, with the vehicle unlocked, press the Trunk Release button on
the driver’s door, press the touchpadF above the license plate or use the Trunk
Release button on the key fob.
See Keys, Doors and Windows in your Owner Manual.

5
Keyless Access SystemF
The Keyless Access System enables operation of the doors and ignition wi\
thout removing
the key fob from a pocket or purse. The key fob must be within three fee\
t of the door being
unlocked or the trunk.
Keyless Unlocking
With the key fob within range:
Press the lock sensor on the driver’s door
handle to unlock the driver’s door; press it
again within five seconds to unlock all
doors.
Press the lock sensor on a passenger
door handle to unlock all doors.
Press the touchpad above the license
plate to open the trunk.
Keyless Locking
With the ignition off, the key fob out of the vehicle, and all doors closed:
Press the lock sensor on any door handle to lock all doors immediately.
If passive locking is turned on, all doors will lock automatically after a short delay once
all doors are closed.
Note: To change the door lock and unlock settings, go to Remote Lock, Unlock, \
Start in the Vehicle
Settings menu.
See Keys, Doors and Windows in your Owner Manual.
Keyless Access StartF
With the vehicle in Park or Neutral, press
the brake pedal and then press and hold
the ENGINE START/STOP button to start
the engine.
Note: The key fob must be in the vehicle to turn on
the ignition. If the key fob battery is weak, place the
key fob in the pocket in the center console storage
compartment to enable the engine to start. Replace
the key fob battery as soon as possible.
Stopping the Engine
Shift to Park and press the ENGINE
START/STOP button to turn off the engine.
Accessory
With the engine off and the brake pedal not applied, press the ENGINE START/STOP
button to place the ignition system in the accessory position.
See Driving and Operating in your Owner Manual.
F Optional equipment

6
Power SeatsF
Power Seat AdjustmentA. Seat Adjustment
Move the front horizontal control to
move the seat forward or rearward, or
to tilt, raise or lower the seat.
B. Seatback Recline Adjustment
Move the vertical control to recline or
raise the seatback.
C. 4-way Lumbar Adjustment
Move the rear control to adjust the
lumbar support.
Head Restraint Adjustment
Press the release button on the left side
of the head restraint to raise or lower
the head restraint.
Move the head restraint forward by
pulling the front part of it forward.
Move the head restraint rearward by
first pulling the front part of the head
restraint forward completely, until it
releases, and then moving it rearward.
Set Memory Positions
1. Adjust the driver’s seat and power outside mirrors to the desired pos\
itions.
2. Press and hold the SET button and button 1 on the driver’s door at the same time until
a beep sounds.
3. Repeat the steps using button 2 for a second driver.
Recall Positions
At any time, press and hold button 1, 2 or on the driver’s door until the stored
position is reached. Releasing the button before the stored position is \
reached cancels
the recall.
With the vehicle in Park and the ignition on, press and release button 1, 2 or to
recall the stored position.
Note: To change the memory recall settings, go to Comfort and Convenience in t\
he Vehicle
Settings menu.
Easy Exit Seat
Automatically move the seat rearward by turning on the Easy Exit feature. See the Vehi\
cle
Settings menu.
See Seats and Restraints in your Owner Manual.
ABC
F Optional equipment

14
Driver Information Center
Menu Items
Use the controls on the right side of the
steering wheel to view the Info (includes
the trip odometers and fuel information),
Audio, Phone, Navigation, and Settings
menus.
Press the or button to move
between the display zones.
Press the or button to move
through the displayed menu or
submenu.
Press to open a menu or select/
deselect a setting.
Reset an Item
1. Use the controls to display the item.
2. Press and hold
to reset or clear
the item.
Reconfigurable Instrument Cluster
1. Use the controls to display the
Settings menu.
2. Select Display Theme.
3. Select the desired cluster theme.
See Instruments and Controls in your Owner Manual.
The Driver Information Center (DIC) on the instrument cluster displays a variety of vehicle
system information and warning messages.
Electric Parking Brake
To apply the parking brake, pull up
the Parking Brake switch by the
shift lever.
To release the parking brake, turn on
the vehicle ignition, press the brake
pedal and press down the
switch.
\

See Driving and Operating in your Owner Manual.

16
Cruise Control
Setting Cruise Control
1. Press the
On/Off button
(or Adaptive Cruise ControlF
button, if equipped). The Cruise
Control symbol will illuminate in white
on the instrument cluster.
2. When traveling at the desired speed,
press the switch down to the SET–
position to set the speed. The

symbol will illuminate in green on the
instrument cluster.
StabiliTrak/Traction Control Systems
Turning Off Traction Control
Traction control should be turned off if the
vehicle is stuck and rocking the vehicle is
required.
Press the StabiliTrak/Traction
Control button. The Traction Control
Off light will illuminate in the instrument
cluster. Press the button again to turn
on the system.
See Driving and Operating in your Owner Manual.F Optional equipment
Adjusting Cruise Control
RES+ Resume/Accelerate
Press up to resume a set speed. When the system is active, press up to i\
ncrease speed.
SET– Set/Coast
When the system is active, press down to decrease speed.
Follow
Distance Gap (Adaptive Cruise ControlF only)
Press to select a setting of Far, Medium, or Near. This setting is also \
the setting for the
Forward Collision Alert timing.
Cancel
Press to cancel the cruise control without erasing the set speed from me\
mory.
Pressing the brake pedal also will cancel the cruise control.
The cruise control set speed is erased when cruise control or the vehicl\
e ignition is
turned off.
See Driving and Operating in your Owner Manual.
The traction control system limits wheelspin and the StabiliTrak stabili\
ty control system
assists with directional control of the vehicle in difficult driving conditions. Both systems
turn on automatically every time the vehicle is started.