rearview mirror. The required distance de‐
pends on the manual transmitter.4.Simultaneously press and hold the button
of the desired function on the hand-held
transmitter and the button to be program‐
med on the interior rearview mirror. The
LED on the interior rearview mirror will be‐
gin flashing slowly.5.Release both buttons as soon as the LED
flashes more rapidly. The LED flashing
faster indicates that the button on the inte‐
rior rearview mirror has been programmed.
If the LED does not flash faster after at
least 60 seconds, change the distance be‐
tween the interior rearview mirror and the
hand-held transmitter and repeat the step.
Several more attempts at different distan‐
ces may be necessary. Wait at least
15 seconds between attempts.
Canada: if programming with the hand-
held transmitter was interrupted, hold
down the interior rearview mirror button
and repeatedly press and release the
hand-held transmitter button for 2 sec‐
onds.6.To program other functions on other but‐
tons, repeat steps 3 to 5.
The systems can be controlled using the inte‐
rior rearview mirror buttons.
Special feature of the alternating-
code wireless system
If you are unable to operate the system after
repeated programming, please check if the
system to be controlled features an alternat‐
ing-code system.
Read the system's operating manual, or press
the programmed button on the interior rear‐
view mirror longer. If the LED on the interior
rearview mirror starts flashing rapidly and then
stays lit constantly for 2 seconds, the system
features an alternating-code system. Flashing
and continuous illumination of the LED will re‐
peat for approximately 20 seconds.
For systems with an alternating-code system,
the universal garage door opener and the sys‐
tem also have to be synchronized.
Please read the operating manual to find out how to synchronize the system.
Synchronizing is easier with the aid of a sec‐
ond person.
To synchronize:1.Park the vehicle within range of the re‐
mote-controlled system.2.Program the relevant button on the interior
rearview mirror as described.3.Locate and press the synchronizing button
on the system being programmed. You
have approx. 30 seconds for the next step.4.Hold down the programmed button on the
interior rearview mirror for approximately
3 seconds and then release it. If necessary,
repeat this step up to three times in order
to finish synchronization. Once synchroni‐
zation is complete, the programmed func‐
tion will be carried out.
Reprogramming individual buttons
1.Switch on the ignition.2.Press and hold the interior rearview mirror
button to be programmed.3.As soon as the interior rearview mirror LED
starts flashing slowly, hold the hand-held
transmitter for the system to be controlled
approx. 1 to 3 in/2.5 to 8 cm away from the
buttons of the interior rearview mirror. The
required distance depends on the manual
transmitter.4.Likewise, press and hold the button of the
desired function on the hand-held trans‐
mitter.5.Release both buttons as soon as the inte‐
rior rearview mirror LED flashes more rap‐
idly. The LED flashing faster indicates that
the button on the interior rearview mirror
has been programmed. The system canSeite 158ControlsInterior equipment158
Online Edition for Part no. 01 40 2 956 993 - X/14
Malfunction displays, seeCheck Control 85
Malfunction, self-leveling sus‐ pension 134
Manual air distribution 151
Manual air flow 151
Manual brake, refer to Parking brake 72
Manual operation, door lock 39
Manual operation, exterior mirrors 59
Manual operation, fuel filler flap 190
Manual operation, Park Dis‐ tance Control PDC 138
Manual operation, parking brake 74
Manual operation, rearview camera 140
Manual operation, Top View 143
Marking on approved tires 199
Master key, refer to Remote control 34
Maximum cooling 152
Maximum speed, display 93
Maximum speed, winter tires 200
M Compound brake 176
MDM, M Dynamic Mode 130
M Drive 61
M Driving Dynamics Con‐ trol 82
M Dynamic Mode MDM 130
Measure, units of 98
Medical kit 221
Memory for seat, mirrors, steering wheel 58
Menu in instrument clus‐ ter 94
Menus, operating, iDrive 18
Menus, refer to iDrive operat‐ ing concept 20 Messages, see Check Con‐
trol 85
Microfilter 153
Minimum tread, tires 198
Mirror 59
Mirror memory 58
Mobile communication devi‐ ces in the vehicle 178
Mobility System 200
Modifications, technical, refer to Safety 7
Moisture in headlight 215
Monitor, refer to Control Dis‐ play 18
Mounting of child restraint systems 63
Moving sun visor 159
M technology 176
Multifunction steering wheel, buttons 14
M view, head-up display 99
N Navigation, see user's manual for Navigation, Entertain‐
ment and Communication
Neck restraints, front, refer to Head restraints 56
Neck restraints, rear, refer to Head restraints 57
Neutral cleaner, see wheel cleaner 227
New wheels and tires 199
Night Vision 119
Night Vision device, see Night Vision 119
Nylon rope for tow-starting/ towing 223
O OBD Onboard Diagnosis 211
OBD, see OBD Onboard Di‐ agnosis 211 Object detection, see Night
Vision 119
Obstacle marking, rearview camera 141
Octane rating, refer to Rec‐ ommended fuel grade 192
Odometer 89
Office, see user's manual for Navigation, Entertainment
and Communication
Offroad trips 179
Oil 206
Oil, adding 207
Oil additives 207
Oil change 208
Oil change interval, service requirements 92
Oil filler neck 207
Oil types, alternative 208
Oil types, approved 208
Old batteries, disposal 219
Onboard monitor, refer to Control Display 18
Onboard vehicle tool kit 213
Opening/closing via door lock 39
Opening and closing 34
Opening and closing, without remote control 39
Opening and closing, with re‐ mote control 37
Opening the tailgate with no- touch activation 44
Operating concept, iDrive 18
Optional equipment, standard equipment 6
Outside air, refer to Auto‐ matic recirculated-air con‐
trol 152
Overheating of engine, refer to Coolant temperature 89
P Paint, vehicle 226
Panoramic glass sunroof 49 Seite 241Everything from A to ZReference241
Online Edition for Part no. 01 40 2 956 993 - X/14
