If a tire inflation pressure of 2 bar cannot be
reached, contact your service center.
Stowing the Mobility System
1.Unscrew the filling hose of the sealant con‐
tainer from the wheel.2.Unscrew the connection hose of the com‐
pressor from the sealant container.3.Connect the filling hose of the sealant con‐
tainer previously connected to the tire
valve with the available connector on the
sealant container.
This prevents leftover sealant from escap‐
ing from the container.4.Wrap the empty sealant container in suita‐
ble material to avoid dirtying the cargo
area.5.Stow the Mobility System back in the vehi‐
cle.
Distributing the sealant
Immediately drive approx. 5 miles/10 km to en‐
sure that the sealant is evenly distributed in the
tire.
Do not exceed a speed of 50 mph/80 km/h.
If possible, do not drive at speeds less than
12 mph/20 km/h.
To correct the tire inflation pressure
1.Stop at a suitable location.2.Screw the connection hose of the com‐
pressor directly onto the tire valve stem.3.Insert the connector into the power socket
inside the vehicle.4.Correct the tire inflation pressure to
2.5 bar.▷Increase pressure: with the ignition
turned on or the engine running, reel
on the compressor.▷To reduce the pressure: press the but‐
ton on the compressor.Continuing the trip
Do not exceed the maximum permissible
speed of 50 mph/80 km/h.
Reinitialize the Flat Tire Monitor.
Reinitialize the Tire Pressure Monitor.
Replace the defective tire and the sealant con‐
tainer of the Mobility System as soon as possi‐
ble.
Snow chains Fine-link snow chains
Only certain types of fine-link snow chains
have been tested by the manufacturer of the
vehicle, classified as road-safe and approved.
Information about the approved snow chains
are available from the service center.
Use
Use only in pairs on the rear wheels, equipped
with the tires of the following size:▷255/40 R 19▷255/35 R 20
Follow the snow chain manufacturer's instruc‐
tions.
Make sure that the snow chains are always
sufficiently tight. Retighten as needed accord‐
ing to the chain manufacturer's instructions.
Do not initialize the Flat Tire Monitor after
mounting snow chains, as doing so may result
in incorrect readings.
Do not initialize the Tire Pressure Monitor after
mounting snow chains, as doing so may result
in incorrect readings.
When driving with snow chains, if needed
briefly activate M Dynamic Mode.
Maximum speed with snow chains
Do not exceed a speed of 30 mph/50 km/h
when using snow chains.
Seite 182MobilityWheels and tires182
Online Edition for Part no. 01 40 2 956 164 - X/14
Service requirements, Condi‐tion Based Service
CBS 189
Service requirements, dis‐ play 87
Service, Roadside Assis‐ tance 198
Services, ConnectedDrive
Servotronic 126
SET button, see Cruise con‐ trol 128
Settings, locking/unlock‐ ing 42
Settings, M Drive 58
Settings on Control Dis‐ play 92
Settings, storing for seat, mir‐ rors, steering wheel 55
Shift Lights 95
Shoulder support 51
Side airbags 101
Side View 135
Signaling, horn 14
Signals when unlocking 43
Sitting safely 49
Size 210
Ski bag 150
Smallest turning radius 210
Smoker's package 147
Snow chains 182
Socket 148
Socket, OBD Onboard Diag‐ nostics 189
SOS button 197
Spare fuse 195
Speaker lighting 100
Specified engine oil types 187
Speed, average 90
Speed limit detection, com‐ puter 91
Speed limiter, display 88
Speed Limit Information 88
Speed warning 91
Split screen 23 Sport displays, torque dis‐
play, performance dis‐
play 91
Stability control systems 123
Standard view, head-up dis‐ play 94
Start/stop, automatic func‐ tion 66
Start/Stop button 64
Start function during malfunc‐ tion 35
Starting the engine 65
Status control display, tires 105
Status information, iDrive 22
Status of Owner's Manual 6
Steering assistance 126
Steering wheel, adjusting 57
Steering wheel heating 58
Steering wheel memory 55
Stopping the engine 65
Storage compartments 152
Storage compartments, loca‐ tions 152
Storage, tires 179
Storing the vehicle 206
Summer tires, tread 177
Sun visor 147
Supplementary text mes‐ sage 83
Surround View 132
Switch-on times, parked-car ventilation 144
Switch, refer to Cockpit 14
Symbols 6
Symbols in the status field 22
SYNC program, automatic cli‐ mate control 141
System states of dynamic driving 86
T
Tachometer 83
Tail and brake lights 193
Tail lights 193 Tail lights, bulb replace‐
ment 193
Technical changes, refer to Safety 7
Technical data 210
Technology, BMW M 158
Telephone, see user's manual for Navigation, Entertain‐
ment and Communication
Temperature, automatic cli‐ mate control 139
Temperature display for ex‐ ternal temperature 84
Temperature, engine oil 84
Terminal, starting aid 199
Text message, supplemen‐ tary 83
Theft alarm system, refer to Alarm system 43
Thermal camera, see Night Vision 114
Thigh support 50
Through-loading system 149
Tilt alarm sensor 44
Tilt glass roof 47
Tilt, seats 49
Time of arrival 91
Tire damage 177
Tire identification marks 175
Tire inflation pressure 174
Tire inflation pressure moni‐ tor, refer to FTM 107
Tire Pressure Monitor TPM 104
Tires, changing 178
Tire sealant 179
Tires, everything on wheels and tires 174
Tire tread 177
Tone, see user's manual for Navigation, Entertainment
and Communication
Tool 191
Top View 136
Total vehicle weight 210
Touchpad 21 Seite 219Everything from A to ZReference219
Online Edition for Part no. 01 40 2 956 164 - X/14
