HintsSufficient ventilation
When remaining in the vehicle for an ex‐
tended period of time, ensure sufficient exter‐
nal ventilation. Do not continuously use recir‐
culated-air mode; otherwise the air quality in
the interior continuously worsens.◀
Climate control functions in detail
Manual air distribution Press button repeatedly to select a
program:▷Upper body region.▷Upper body region and footwell.▷Footwell.▷Windows and footwell.▷Windows, upper body region, and footwell.▷Windows: driver's side only.▷Windows and upper body region.
If the windows are fogged over, press the
AUTO button on the driver's side to utilize the
condensation sensor.
Temperature Turn the ring to set the desired
temperature.
The automatic climate control achieves this
temperature as quickly as possible, if needed
by using the maximum cooling or heating li‐
dacity, and then keeps it constant.
Do not rapidly switch between different tem‐
perature settings. Otherwise, the automatic cli‐
mate control will not have sufficient time to ad‐
just the set temperature.
AUTO program
Press button.
Air flow, air distribution and tempera‐
ture are controlled automatically.
Depending on the selected temperature,
AUTO intensity program and outside influen‐
ces, the air is directed to the windshield, side
windows, upper body, and into the footwell.
The cooling function, refer to page 167, is
switched on automatically with the AUTO pro‐
gram.
At the same time, a condensation sensor con‐
trols the program so as to prevent window
condensation as much as possible.
Intensity of the AUTO program
With the AUTO program activated, the auto‐
matic intensity control can be changed.
Press the left or right side of the but‐
ton: decrease or increase the inten‐
sity.
The selected intensity is shown on the display
of the automatic climate control.
Air flow, manual
To manually adjust air flow turn off AUTO pro‐
gram first.
Press the left or right side of the but‐
ton: decrease or increase air flow.
The selected air flow is shown on the display of
the automatic climate control.
The air flow of the automatic climate control
may be reduced automatically to save battery
power.
Defrosts windows and removes
condensation
Press button.Seite 166ControlsClimate control166
Online Edition for Part no. 01 40 2 956 056 - X/14
Ice and condensation are quickly removed
from the windshield and the front side win‐
dows.
For this purpose, point the side vents onto the
side windows as needed.
Adjust air flow with the program active.
If the windows are fogged over, you can also
reel on the cooling function or press the AUTO
button to utilize the condensation sensor.
Maximum cooling Press button.
The system is set to the lowest tem‐
perature, optimum air flow and air circulation
mode.
Air flows out of the vents to the upper body re‐
gion. The vents need to be open for this.
The function is available above an external
temperature of approx. 32 ℉/0 ℃ and with the
engine running or when electrical drive readi‐
ness is indicated is indicated.
Adjust air flow with the program active.
Automatic recirculated-air control/
recirculated-air mode
You may respond to unpleasant odors or pollu‐
tants in the immediate environment by tempo‐
rarily suspending the supply of outside air. The
system then recirculates the air currently
within the vehicle.
Press button repeatedly to select an
operating mode:▷LEDs off: outside air flows in continuously.▷Left LED on, automatic recirculated-air
control: a sensor detects pollutants in the
outside air and shuts off automatically.▷Right LED on, recirculated-air mode: the
supply of outside air into the vehicle is per‐
manently blocked.
If the windows are fogged over, reel off the re‐
circulated-air mode and press the AUTO but‐
ton on the driver's side to utilize the condensa‐
tion sensor. Make sure that air can flow to the
windshield.
Sufficient ventilation
When remaining in the vehicle for an ex‐
tended period of time, ensure sufficient exter‐
nal ventilation. Do not continuously use recir‐
culated-air mode; otherwise the air quality in
the interior continuously worsens.◀
Cooling function
The car's interior can be cooled with the en‐
gine running or switched off.
Press button.
The air will be cooled and dehumidi‐
fied and, depending on the temperature set‐
ting, warmed again.
Depending on the weather, the windshield and
side windows may fog up briefly when the en‐
gine is started.
The cooling function is switched on automati‐
cally with the AUTO program.
When using the automatic climate control,
condensation water, refer to page 190, devel‐
ops that exits underneath the vehicle.
Rear window defroster Press button.
The rear window defroster switches
off automatically after a certain period of time.
SYNC program The current settings on the driver'sside for temperature, air flow, air distri‐
bution, and AUTO program are transferred to the front passenger side and to the left andright rear.
The program is switched off if the settings on
the front passenger side or in the rear are
changed.Seite 167Climate controlControls167
Online Edition for Part no. 01 40 2 956 056 - X/14
MaintenanceVehicle features and options
This chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems.
BMW maintenance system
The maintenance system indicates required
maintenance measures, and thereby provides
support in maintaining road safety and the op‐
erational reliability of the vehicle.
Condition Based Service
CBS
Sensors and special algorithms take into ac‐
count the driving conditions of your vehicle.
Based on this, Condition Based Service recog‐
nizes the maintenance requirements.
The system makes it possible to adapt the
amount of maintenance corresponding to your
user profile.
Details on the service requirements, refer to
page 98, can be displayed on the Control Dis‐
play.
Service data in the remote control Information on the required maintenance is
continuously stored in the remote control.
Your service center will read out this data and
suggest the right array of service procedures
for your vehicle.
Therefore, hand your service specialist the re‐
mote control with which the vehicle was driven
most recently.Storage periods
Storage periods during which the vehicle bat‐
tery was disconnected are not taken into ac‐
count.
If this occurs, have a service center update the
time-dependent maintenance procedures,
such as checking brake fluid and, if needed,
changing the engine oil and the microfilter/
activated-charcoal filter.
Service and Warranty
Information Booklet for US
models and Warranty and
Service Guide Booklet for
Canadian models
Please consult your Service and Warranty In‐
formation Booklet for US models and Warranty
and Service Guide Booklet for Canadian mod‐ els for additional information on service re‐
quirements.
Maintenance and repair should be performed
by your service center. Make sure to have reg‐
ular maintenance procedures recorded in the
vehicle's Service and Warranty Information
Booklet for US models, and in the Warranty
and Service Guide Booklet for Canadian mod‐
els. These entries are proof of regular mainte‐
nance.
Socket for OBD Onboard
Diagnosis
Note Socket for Onboard Diagnosis
The socket for onboard diagnostics may
only be used by the service center or a work‐
shop that operates in accordance with the
specifications of the vehicle manufacturer withSeite 219MaintenanceMobility219
Online Edition for Part no. 01 40 2 956 056 - X/14
CareVehicle features and optionsThis chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems.
Car washes
General information
Regularly remove foreign objects such as
leaves in the area below the windshield when
the hood is raised.
Wash your vehicle frequently, particularly in
winter. Intense soiling and road salt can dam‐
age the vehicle.
Hints Steam jets or high-pressure washers
When using steam jets or high-pressure
washers, hold them a sufficient distance away
and use a maximum temperature of
140 ℉/60 ℃.
If the vehicle has a glass sunroof, ensure that a
distance of at least 31.5 inches/80 cm is main‐
tained. Holding them too close or using exces‐
sively high pressures or temperatures can
cause damage or preliminary damage that may
then lead to long-term damage.
Follow the user's manual for the high-pressure
washer.◀
Cleaning sensors/cameras with high-
pressure washers
When using high-pressure washers, do not
spray the exterior sensors and cameras, e.g.,
Park Distance Control, for extended periods oftime and only from a distance of at least
12 in/30 cm.◀
Automatic car washes
Hints Note the following:▷Give preference to cloth car washes or
those that use soft brushes in order to
avoid paint damage.▷Make sure that the wheels and tires are not
damaged by the transport mechanisms.▷Fold in the exterior mirrors; otherwise, they
may be damaged, depending on the width
of the vehicle.▷Deactivate the rain sensor, refer to
page 85, to avoid unintentional wiper acti‐
vation.▷In some cases, an unintentional alarm can
be triggered by the interior motion sensor
of the alarm system. Follow the instruc‐
tions on avoiding an unintentional alarm,
refer to page 51.
Guide rails in car washes
Avoid car washes with guide rails higher
than 4 in/10 cm; otherwise, the vehicle body
could be damaged.◀
Before driving into a car wash In order to ensure that the vehicle can roll in a
car wash, take the following steps:
1.Drive into the car wash.2.Engage selector lever position N.3.Deactivating Automatic Hold, refer to
page 81.4.Release the parking brake.5.Switch the engine off.Seite 234MobilityCare234
Online Edition for Part no. 01 40 2 956 056 - X/14
Carpets and floor matsNo objects in the area around the pedals
Keep floor mats, carpets, and any other
objects out of the pedal area; otherwise, the
function of the pedals could be impeded while driving and create the risk of an accident.
Do not place additional floor mats over existing
mats or other objects.
Only use floor mats that have been approved
for the vehicle and can be properly attached to
floor.
Ensure that the floor mats are securely fas‐
tened again after they were removed for clean‐
ing, e.g.◀
Floor mats can be removed from the car's inte‐
rior for cleaning.
If the floor carpets are very dirty, clean with a microfiber cloth and water or a textile cleaner.
To prevent matting of the carpet, rub back and
forth in the direction of travel only.
Sensors/cameras
To clean sensors and cameras, use a cloth
moistened with a small amount of glass
cleaner.
Displays/monitors Cleaning displays and screens
Do not use any chemical or household
cleaning agents; otherwise, surfaces can be af‐
fected.◀
Keeping out moisture
Keep all fluids and moisture away from
the unit; otherwise, electrical components can
be damaged.◀
Avoid pressure
Avoid pressing too hard when cleaning
and do not use abrasive materials; otherwise,
damage can result.◀
Clean with a clean, antistatic microfiber cloth.Long-term For idle phases that last several weeks, park
the vehicle with a fully charged battery if possi‐
ble. Your service center can advise you on
what to consider when storing the vehicle for
longer than six weeks.
Do not allow the vehicle to sit idle for ex‐
tended periods with a low charging state
Before storing the vehicle for an extended pe‐
riod, check the battery charge indicator to en‐
sure that the high-voltage battery is fully
charged. If necessary, charge the high-voltage
battery by driving the vehicle. Check the
charge level regularly, and if needed recharge
the high-voltage battery by driving the vehicle.
Don't allow battery charge status to drop too
low - it will damage the battery.◀
Note Follow the instructions for discharging thehigh-voltage battery, refer to page 187.Seite 237CareMobility237
Online Edition for Part no. 01 40 2 956 056 - X/14
Gear change, Steptronictransmission 87
Gear shift indicator 99
General driving notes 188
Gentleman function 58
Glare shield 175
Glass sunroof, powered 53
Glove compartment 179
Gross vehicle weight, ap‐ proved 241
H
Handbrake, refer to Parking brake 79
Hand-held transmitter, alter‐ nating code 174
Hazard warning flashers 228
Head airbags 112
Headlight control, auto‐ matic 108
Headlight courtesy delay fea‐ ture 107
Headlight courtesy delay fea‐ ture, remote control 49
Headlight courtesy delay fea‐ ture via remote control 40
Headlight flasher 84
Headlight glass 222
Headlights, care 235
Headlight washer system 84
Head restraints 56
Head restraints, front 63
Head restraints, rear 64
Head-up Display 105
Head-up Display, care 237
Heavy cargo, stowing 192
Height, vehicle 240
High-beam Assistant 109
High beams 84
High beams/low beams, refer to High-beam Assistant 109
High-voltage battery, charge indicator 91
High-voltage battery, dis‐ charge 187 Hills 189
Hill start assistant, refer to Drive-off assistant 138
Hints 6
Holder for beverages 181
Hood 212
Horn 14
Hotel function, trunk lid 45
Hot exhaust system 188
HUD Head-up Display 105
Hybrid system, adapting to the course of the road 93
Hybrid system, at a glance 31
Hybrid system, automatic de‐ activation 233
Hybrid system, contact with water 233
Hybrid system, displays 91
Hybrid system, safety 232
Hydroplaning 189
I Ice warning, see External temperature warning 97
Icy roads, see External tem‐ perature warning 97
Identification marks, tires 206
Identification number, see ve‐ hicle identification num‐
ber 10
iDrive 18
Ignition key, refer to Remote control 36
Ignition off 75
Ignition on 75
Indication of a flat tire 116 , 118
Indicator and alarm lamps, see Check Control 93
Indicator lamp, see Check Control 93
Individual air distribution 166
Individual settings, refer to Personal Profile 37
Inflation pressure, tires 204 Inflation pressure warning
FTM, tires 115
Info display, refer to Com‐ puter 101
Initialize, Tire Pressure Moni‐ tor TPM 118
Initializing, Flat Tire Monitor FTM 115
Instrument cluster 90
Instrument cluster, electronic displays 90
Instrument lighting 110
Integrated key 36
Integrated Owner's Manual in the vehicle 29
Intelligent Emergency Re‐ quest 228
Intelligent Safety 120
Intensity, AUTO pro‐ gram 166
Interior equipment 173
Interior lights 110
Interior lights via remote con‐ trol 40
Interior motion sensor 50
Interior rearview mirror, auto‐ matic dimming feature 69
Interior rearview mirror, man‐ ually dimmable 69
Interval display, service re‐ quirements 98
J Jacking points for the vehicle jack 225
Joystick, Steptronic transmis‐ sion 87
Jump-starting 229
K
Key/remote control 36
Keyless Go, refer to Comfort Access 45 Seite 246ReferenceEverything from A to Z246
Online Edition for Part no. 01 40 2 956 056 - X/14
Monitor, refer to Control Dis‐play 18
Mounting of child restraint systems 71
Multifunction steering wheel, buttons 14
N Navigation, see user's manual for Navigation, Entertain‐
ment and Communication
Neck restraints, front, refer to Head restraints 63
Neck restraints, rear, refer to Head restraints 64
Neutral cleaner, see wheel cleaner 236
New wheels and tires 209
Night Vision 129
Night Vision device, see Night Vision 129
Nylon rope for tow-starting/ towing 231
O OBD Onboard Diagnosis 219
OBD, see OBD Onboard Di‐ agnosis 219
Object detection, see Night Vision 129
Obstacle marking, rearview camera 157
Octane rating, refer to Rec‐ ommended fuel grade 202
Odometer 97
Office, see user's manual for Navigation, Entertainment
and Communication
Officially use hybrid sys‐ tem 186
Oil 214
Oil, adding 215
Oil additives 215
Oil change 216 Oil change interval, service
requirements 98
Oil filler neck 215
Oil types, alternative 216
Oil types, approved 216
Old batteries, disposal 227
Onboard monitor, refer to Control Display 18
Onboard vehicle tool kit 221
Opening/closing via door lock 41
Opening and closing 36
Opening and closing, without remote control 41
Opening and closing, with re‐ mote control 39
Opening the trunk lid with no- touch activation 46, 47
Operating concept, iDrive 18
Optional equipment, standard equipment 6
Outside air, refer to Auto‐ matic recirculated-air con‐
trol 167
Overheating of engine, refer to Coolant temperature 97
P Paint, vehicle 235
Parallel parking assistant 161
Park Distance Control PDC 153
Parked-car ventilation 171
Parked vehicle, condensa‐ tion 190
Parking aid, refer to PDC 153
Parking assistant 161
Parking brake 79
Parking lights 107
Parking lights and roadside parking lights, refer to Light-
emitting diodes, LEDs 223
Parking with Automatic Hold 80 Passenger side mirror, tilting
downward 68
Pathway lines, rearview cam‐ era 156
PDC Park Distance Con‐ trol 153
Pedestrian detection, see Night Vision 129
Pedestrian warning with city braking function 127
Personal Profile 37
Personal Profile, exporting profiles 38
Pinch protection system, glass sunroof 54
Pinch protection system, win‐ dows 52
Plastic, care 236
Power failure 226
Power sunroof, glass 53
Power windows 51
Pressure, tire air pres‐ sure 204
Pressure warning FTM, tires 115
Profile, refer to Personal Pro‐ file 37
Programmable memory but‐ tons, iDrive 23
Protective function, glass sunroof 54
Protective function, win‐ dows 52
Push-and-turn reel, refer to Controller 18
R Radiator fluid 217
Radio-operated key, refer to Remote control 36
Radio ready state 75
Radio, see user's manual for Navigation, Entertainment
and Communication
Rain sensor 85 Seite 248ReferenceEverything from A to Z248
Online Edition for Part no. 01 40 2 956 056 - X/14
Rear automatic climate con‐trol 169
Rear lights 224
Rear seats 59
Rear seats, basic position 61
Rear sockets 177
Rear vanity mirror 69
Rearview camera 155
Rearview mirror 67
Rear window defroster 167
Recirculated-air mode 167
Recommended fuel grade 202
Recommended tire brands 209
Refueling 200
Remaining range 98
Remote control/key 36
Remote control, auxiliary air conditioning, key 172
Remote control, malfunc‐ tion 40
Remote control, univer‐ sal 173
Replacement fuse 227
Replacing parts 221
Replacing wheels/tires 209
Reporting safety defects 10
RES button 147
RES button, see Active Cruise Control, ACC 144
RES button, see Cruise con‐ trol 151
Reserve warning, refer to Range 98
Reset, Tire Pressure Monitor TPM 118
Residual cooling 171
Residual heat, automatic cli‐ mate control 168
Retaining straps, securing cargo 192
Retreaded tires 209
Reversing lamp, bulb replace‐ ment 224
Roadside parking lights 108 Roller sunblinds 52
RON recommended fuel grade 202
Roofliner 17
Roof load capacity 241
Roof-mounted luggage rack 192
Rope for tow-starting/ towing 231
RSC Run Flat System Com‐ ponent, refer to Run-flat
tires 210
Rubber components, care 236
Run-flat tires 210
S Safe braking 189
Safety 7
Safety belt reminder for driv‐ er's seat and front passen‐
ger seat 63
Safety belts 62
Safety belts, care 236
Safety of the hybrid sys‐ tem 232
Safety Package, refer to Ac‐ tive Protection 135
Safety reel, windows 52
Safety systems, airbags 112
Saving fuel 194
Screen, refer to Control Dis‐ play 18
Screwdriver, see Onboard ve‐ hicle tool kit 221
Screw thread, see screw thread for tow fitting, screw
thread for tow fitting 232
Seat belts, refer to Safety belts 62
Seat heating, front 59
Seat heating, rear 61
Seating position for chil‐ dren 71 Seat, mirror, and steering
wheel memory 66
Seats 56
Seats, front 56
Seats, rear 59
Seat ventilation, front 59
Seat ventilation, rear 62
Selection list in instrument cluster 101
Selector lever, Steptronic transmission 87
Self-leveling suspension, air suspension 140
Self-leveling suspension, malfunction 140
Sensors, care 237
Service and warranty 8
Service requirements, Condi‐ tion Based Service
CBS 219
Service requirements, dis‐ play 98
Service, Roadside Assis‐ tance 229
Services, ConnectedDrive
SET button, see Active Cruise Control, ACC 144
SET button, see Cruise con‐ trol 151
Settings, locking/unlock‐ ing 48
Settings on Control Dis‐ play 104
Settings, storing for seat, mir‐ rors, steering wheel 66
Shift paddles on steering wheel 88
Shoulder support 58
Side airbags 112
Side View 158
Signaling, horn 14
Signals when unlocking 49
Silent Start, electric drive readiness 76
Sitting safely 56
Size 240 Seite 249Everything from A to ZReference249
Online Edition for Part no. 01 40 2 956 056 - X/14