Things to remember when drivingVehicle features and options
This chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems.
Breaking-in period
General information Moving parts need time to adjust to one an‐
other (break-in time).
The following instructions will help accomplish
a long vehicle life and good efficiency.
Engine, transmission, and axle drive Always obey the official speed limit.
Up to 1,200 miles/2,000 km
Do not exceed the maximum engine and road
speed:▷For gasoline engine 4,500 rpm and
100 mph/160 km/h.
Avoid full load or kickdown under all circum‐
stances.
From 1,200 miles/2,000 km The engine and vehicle speed can gradually be
increased.
Tires
Tire traction is not optimal due to manufactur‐
ing circumstances when tires are brand-new;
they achieve their full traction potential after a
break-in time.
Drive conservatively for the first
200 miles/300 km.
Brake system
Brakes require an initial break-in period of ap‐
prox. 300 miles/500 km to achieve optimal per‐
formance between brake discs and brake
pads. Drive moderately during this break-in pe‐
riod.
Following part replacement The same break-in procedures should be ob‐
served if any of the components above-men‐
tioned have to be renewed in the course of the
vehicle's operating life.
Using the hybrid system
efficiently
The concept
The vehicle's hybrid system runs automati‐
cally. Through foresighted driving, the hybrid
properties are efficiently used, i.e., fuel con‐
sumption and energy recovery are optimized.
Optimizing energy recovery
Types of energy recovery
Energy recovery is used to charge the high-
voltage battery. It is important for the supply of
electrical components and thus a prerequisite
for fuel efficiency. It appears in three stages
during coasting to a halt and braking.
Low energy recovery:
Seite 180Driving tipsThings to remember when driving180
Online Edition for Part no. 01 40 2 956 272 - X/14
FuelVehicle features and optionsThis chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems.
Fuel recommendation
Note General fuel quality
Even fuels that conform to the specifica‐
tions can be of low quality. This may cause en‐
gine problems, for instance poor engine start-
up behavior, poor handling and/or poor
performance. Switch gas stations or use a
brand name fuel with a higher octane rating.◀
Gasoline
For the best fuel efficiency, the gasoline
should be sulfur-free or very low in sulfur con‐
tent.
Fuels that are marked on the gas pump as con‐
taining metal must not be used.
Refuel only with unleaded gasoline with‐
out metallic additives.
Do not refuel with any leaded gasoline or gaso‐
line with metallic additives, e. g. manganese or
iron, as this can cause permanent damage to
the catalytic converter and other compo‐
nents.◀
Fuels with a maximum ethanol content of
10 %, i. e., E10, may be used for refueling.
Ethanol should satisfy the following quality
standards:
US: ASTM 4806–xxCAN: CGSB-3.511–xx
xx: comply with the current standard in each
case.
Do not use a fuel with a higher percent‐
age of ethanol
Do not use a fuel with a higher ethanol per‐
centage than recommended or one with other
types of alcohol, e.g. M5 to M100; otherwise
this could damage the engine and fuel supply
system.◀
Recommended fuel grade BMW recommends AKI 91.
Minimum fuel grade
BMW recommends AKI 89.
Minimum fuel grade
Do not use any gasoline below the mini‐
mum fuel grade as this may impair engine per‐
formance.◀
If you use gasoline with this minimum AKI Rat‐
ing, the engine may produce knocking sounds
when starting at high outside temperatures.
This has no effect on the engine life.
Fuel quality
The use of poor-quality fuels may result
in harmful engine deposits or damage. Addi‐
tionally, problems relating to drivability, start‐
ing and stalling, especially under certain envi‐
ronmental conditions such as high ambient
temperature and high altitude, may occur.
If drivability problems are encountered, we rec‐
ommend switching to a high quality gasoline
brand and a higher octane grade — AKI num‐
ber — for a few tank fills. To avoid harmful en‐
gine deposits, it is highly recommended to
purchase gasoline from BP or Top Tier retail‐
ers.Seite 196MobilityFuel196
Online Edition for Part no. 01 40 2 956 272 - X/14
The engine oil quality is critical for the life of
the engine.
Approved engine oil types
You can add engine oils with the following
specifications:Gasoline engineBMW Longlife-01.BMW Longlife-01 FE.
Additional information about the approved
types of engine oils can be obtained from the
service center.
Alternative engine oil types If the approved engine oils are not available, up
to 1 US quart/liter of an engine oil with the fol‐
lowing specification can be added:
Gasoline engineAPI SM or superior grade specification.
Engine oil change:
The vehicle manufacturer recommends that
you let the service center change the motor oil.
Seite 210MobilityEngine oil210
Online Edition for Part no. 01 40 2 956 272 - X/14
ECO PRO Tip - driving in‐struction 191
eDRIVE, electric driving 74
Electric drive readiness, Si‐ lent Start 72
Electric driving, eDRIVE 74
Electronic displays, instru‐ ment cluster 85
Electronic oil measure‐ ment 208
Electronic Stability Program ESP, refer to DSC 134
Emergency detection, remote control 37
Emergency release, fuel filler flap 194
Emergency Request 222
Emergency service, refer to Roadside Assistance 223
Emergency start function, en‐ gine start 37
Emergency unlocking, trans‐ mission lock 84
Emergency unlocking, trunk lid 45
Energy recovery, CHARGE 75
Engine, automatic off 73
Engine compartment 206
Engine compartment, work‐ ing in 206
Engine coolant 211
Engine oil 208
Engine oil, adding 209
Engine oil additives 209
Engine oil change 210
Engine oil filler neck 209
Engine oil temperature 92
Engine oil types, alterna‐ tive 210
Engine oil types, ap‐ proved 210
Engine start during malfunc‐ tion 37
Engine start, jump-start‐ ing 223 Engine temperature 92
Entering a car wash 228
Equipment, interior 168
Error displays, see Check Control 88
ESP Electronic Stability Pro‐ gram, refer to DSC 134
Exchanging wheels/tires 203
Exhaust system 182
Exterior mirror, automatic dimming feature 65
Exterior mirrors 64
External start 223
External temperature dis‐ play 92
External temperature warn‐ ing 92
Eyes for securing cargo 186
F
Failure message, see Check Control 88
False alarm, refer to Uninten‐ tional alarm 50
Fan, refer to Air flow 161
Filler neck for engine oil 209
Fine wood, care 230
First aid kit 223
Fitting for towing, see tow fit‐ ting 226
Flat tire, changing wheels 220
Flat Tire Monitor FTM 114
Flat tire, Tire Pressure Moni‐ tor TPM 110
Flat tire, warning lamp 111, 114
Flooding 183
Floor carpet, care 231
Floor mats, care 231
Fold-out position, wiper 80
Foot brake 183
Front airbags 107
Front-end collision warning with braking function 119 Front-end collision warning
with City Braking func‐
tion 116
Front fog lights 105
Front fog lights, bulb replace‐ ment 218
Front lights 216
front-seat passenger airbags, automatic deactivation 109
Front-seat passenger airbags, indicator lamp 109
FTM Flat Tire Monitor 114
Fuel 196
Fuel consumption, refer to Average fuel consump‐
tion 97
Fuel filler flap 194
Fuel gauge 92
Fuel lid 194
Fuel quality 196
Fuel recommendation 196
Fuel, tank capacity 235
Functions, hybrid system 31
Fuse 221
G
Garage door opener, refer to Universal Integrated Remote
Control 168
Gasoline 196
Gear change, Steptronic transmission 82
Gear shift indicator 94
General driving notes 182
Glare shield 170
Glass sunroof, powered 52
Glove compartment 174
Gross vehicle weight, ap‐ proved 235
H
Handbrake, refer to Parking brake 75 Seite 239Everything from A to ZReference239
Online Edition for Part no. 01 40 2 956 272 - X/14