2014 AUDI A7 mirror controls

50 Clear vis ion
Wiper servi ce po sition /blade rep lacem ent
po sit ion
• Switch the ignition off and move the wind­
shield wiper lever to position @¢
page 48,
fig. 42. The windshield wipers move into the
service position.
• To bring the wipers back into the original
pos ition, switch the ignition on and press
the windshie ld wiper lever.
You can also turn the service position on or
off
in the MMI:
• Switch the w indshield wipers off (posit ion
@ ¢page 48, fig. 42).
• Se lect: I CAR I funct ion button> (C ar)* sys·
tern s
control button > Servicing & ch eck s >
Wip er serv ice po sition > On .
R em oving the wip er blade
• Lift the w indshield wiper arm up from the
wi ndshield.
• Press the locking knob
(D ~ fig. 43 on the
wiper blade. Hold t he wiper blade firm ly.
• Remove the wiper blade in the direction of
the arrow .
Attaching th e wiper blade
• Install the new wipe r blade in the retaine r
on the w iper arm @until you hear it cl ick in­
to place on the wiper arm.
• Place the wiper arm back on the windshie ld .
• Turn the service pos ition
off .
A WARNING
-
For your safety, yo u should replace the
wiper blades once or tw ice a year. See your
authorized Audi dealer for rep lacement
blades.
(D Note
- The windshield wiper blades must on ly
be folded away when in the service posi­
tion! Otherwise, you risk damaging the paint on the hood or the w indshield wip·
er moto r.
- You should not
move your vehicle or
press the w indshield w iper lever when
the wip er arms are folded away from the w
indshield. The windsh ield wipers wou ld
move back into their original position
and co uld damage the hood and wind­
shield.
- To help prevent damage to the wiper sys­
tem, always loosen blades wh ich are fro­
zen to the windshield before operating
w ipers.
- To help prevent damage to wiper blades,
do not use gasoline, kerosene, paint
thinner, or other solvents on o r near the
w iper blades.
- To help prevent damage to the wiper
arms or other components, do not at­
tempt to move the wipe rs by hand.
¢j) Tips
- Commercial hot waxes applied by auto·
matic car washes affect the cleanability
of the windshie ld.
- You can also use the se rvice position, for
example, if you want to protect the
w indshield from icing by using a cover.
- You can not activate the service position
when the hood is open .
Mirrors
Adjusting the exterior mirrors
Fig. 44 Forward section of driver 's arm rest: power mir·
ror controls
Turn the knob to the desired posit ion :
Q/P -In this pos ition, yo u can adjust the
driver's and front passenger's exterior mirrors
by turning the knob in the desired direction.
4iil -The m irrors are heated depend ing on the
outside tempera ture. .,._

8 - The exterior mirrors fold in. In the MMI,
you can select if the mirrors fold in automati­
cally when you lock the vehicle ~
page 35.
Tilt function for the passenger's mirror
To help you see the curb when backing into a
parking space, the surface of the mirror tilts
slightly. The knob must be in the P position
for this to happen.
You can adjust the tilted mirror surface by
turning the knob in the desired direction.
When you move out of reverse and into anoth­
er gear, the new mirror position is stored and
assigned to the key you are using.
The mirror goes back into its original position
once you drive forward faster than 9 mph (15
km/h) or switch the ignition off.
.&_ WARNING
- Curved (i.e. convex) mirror surfaces in­
crease your field of view. Remember that
vehicles or other objects will appear
smaller and farther away than when seen in a flat mirror.
If you use this mirror to
estimate distances of following vehicles
when changing lanes, you could estimate
incorrectly and cause an accident.
(D Note
-If the mirror housing is moved uninten­
tionally (for example, while parking your
vehicle), then you must first fold the mi r­
ror electrically. Do not readjust the mir­
ror housing manually. You could damage
the motor which controls the mirror.
- If you wash the vehicle in an automatic
car wash, you must fold the exterior mir­
rors in to reduce the risk of damage to
the mirrors. Never fold power folding ex­
terior mirrors* by hand. Only fold them in and out using the power controls.
@ Tips
-The exterior mirror settings are stored
with the memory function*
~ page S 7.
- If there is a malfunction in the electrical
system, you can still adjust the exterior
Clear vision S 1
mirrors by pressing the edge of the mir­
ror.
Dimming the mirrors
Fig. 45 Automatic dimming rea rview mirro r•
Manual anti-glare adjustment
"' Move the small lever (located on the bottom
edge of the mirror) to the rear.
Automatically dimming mirrors*
"'To dim the rearview mirror and both exterior
mirrors, press the@button. The diode @
turns on. The rearview and exterior mirrors
dim automatically when light shines on
them, for example from headlights on ave­
hicle to the rear.
&_ WARNING
= Electrolyte fluid can leak from automatic
dimming mirrors if the glass is broken.
Electrolyte fluid can irritate skin, eyes and
respiratory system.
~
- Repeated or prolonged exposure to elec­
trolyte can cause irritation to the respira­
tory system, especially among people
with asthma or other respiratory condi­
tions. Get fresh air immediately by leav­
ing the vehicle or, if that is not possible,
open windows and doors all the way.
- If electrolyte gets into the eyes, flush
them thoroughly with large amounts of
clean water for at least 15 minutes·
'
medical attention is recommended.
- If electrolyte contacts skin, flush affect­
ed area with clean water for at least 15 minutes and then wash affected area
with soap and water; medical attention
.___ ______ _:_ ____ _:_.::..:..:..._J ....

-Never use abrasive cleaning materials
or alcohol to clean the camera lens.
Th is could cause scratches and cracks .
-Window s
-Remove snow and ice on w indows and
exterior mirrors with a plastic scraper.
To avoid scratches, move the scraper only in one direction and not back and
forth.
- Never remove snow or ice from w in­
dows and m irrors using wa rm or hot
wate r because this cou ld cause crac ks
to form.
- To avoid damage to the rear window
defogger, do not apply any stickers on
the heating wires on the inside of the
w indow .
-Dec or ati ve p arts /trim
-Never use chrome care or cleaning
products.
-Paint
-To reduce the risk of scratches, the ve-
hicle must be free of dirt and dust be­
fore polishing or waxing.
- To prevent paint damage, do not polish
or wax the veh icle in direct sunlight.
- To reduce the risk of paint damage, do
no t polish away rust film .
-Di splay s
-To avoid scratches, do not use dry
cleaning methods on displays .
-Controls
- Make sure that no flu ids enter the con-
trols, because this cou ld cause dam­
age .
-Safet y belts
- Do not remove the safety belts to clean
t hem.
- Never clean safety belts or their com­
ponents chemically or with cor ros ive
fluids or solvents and never a llow
sharp objects to come into contact
with the safety belts . This cou ld cause
damage to the belt webbing.
- If the re is damage to the webb ing, the
connections, the retractors or the buck­
les, have them rep laced by an author-
V ehicl e ca re a nd cl eanin g 217
ized A udi dealer or a qualified work­
shop.
- Te xtile s/Vin yl/ Alcant ara
- Never treat Vinyl/Alcantara w ith leath-
er care products, solvents, floor polish,
shoe polish, stain remover or s imilar
p rod ucts.
- To avoid damage, have stubborn stains
removed by an authorized Aud i deale r
or a qualif ied workshop.
- Never use steam cleaners, brushes,
hard sponges, etc. when cleaning.
- Objects w ith sharp edges such as zip­
pers, rivets on clothing or be lts can
cause damage to the surface.
- Open hook and loop fastene rs, for ex­
ample on cloth ing, can damage seat
covers. Make sure hook and loop fas­
tene rs a re closed.
- Natural leather
- Neve r treat leather w ith solvents, floor
polish, shoe polish, stain remover or
similar products.
- Objects with sharp edges such as zip·
pers, rivets on clothing or be lts can
cause damage to the surface.
- Never use steam cleaners, brushes,
hard sponges, etc. when cleaning.
- To help prevent the leather from fad­
ing, do not leave the vehicle in d irect
sunlight for long per iods of t ime. If
leaving the vehicle parked for long pe­
riods of time, you should cover the
leather to protect it from d irect sun­
light.
(D Tips
- Insects are easier to remove from paint
that has been freshly waxed.
- Regular waxing can prevent rust film
from forming.
•
•

Gasoline ... ... ... .... ... .. .. .. ... 218
Gasoline additives ..... ... ... ... .. . 219
L ow fuel level symbol .... ... .. .. .. .. 22
Octane rating ..................... 218
Recommendation .................. 218
Refue lling .. ................ ...... 221
Reserve .. .. ... .. .. ..... ... .. .. .. .. 12
Tank capacity . . . . . . . . . . . . . . . . . 12, 283
Fuses Assignment ............. .... .. ... 272
Replacing ............ ........... . 272
G
Garage door opener (Homel ink) .. .. .. . 128
Garment hoo ks ............ .. .. .. .. .. 6 1
Gas discharge lamps .............. .. . 275
Gauges Engine coolant temperature .... .. .... 11
Fuel gauge . .. .. ......... .. .. .. .... 12
Speedometer ... .......... ... .. .. .. 27
Tac hometer ....................... 12
Trip odometer ............ ...... ... 27
General illustration . . . . . . . . . . . . . . . . . . . 8
Gene rato r (warn ing/indicator lights) .... 1 7
Glossary of t ire and load ing termino logy 244
Glove compartment (cooled) ... .. .. .. .. 61
Glow plug system Indicator ligh t . . . . . . . . . . . . . . . . . . . . . 2 1
Gross Veh icle Weight Rating (GVWR) .. . 282
H
Head -up Display . . . . . . . . . . . . . . . . . . . . . 29
H eadlights
Cleaning ... .. ... ..... ... .. .. .. ... 214
C leaning system ... .... ... .. .. .. .. .. 48
Defective . ... .... .... ... .. .. .. .... 23
Headlight range control . . . . . . . . . 23, 44
Washer reservoir .................. 241
H ead restraints . . . . . . . . . . . . . . . . . S6, 134
Ad justing .. .. .. ... . .. ... .. .. .. ... 134
F ront seats .... .. .. ... ... .. .. .. .... 56
Rear seats .. .. .. ......... .. .. .. .... 57
Removing .. ............. .... .. .. .. 57
H ea ted
exterior mirrors ... .... ... .. .. .. .. .. SO
rear window (automatic climate cont ro l) 73
Inde x 295
rear window (climate cont rol) . ... .. .. . 71
seats (automatic climate control) ... .. . 73
seats (climate cont ro l) . . . . . . . . . . . . . . . 71
windshield washer spray noz zles ..... .
48
Heating ............................ 69
Heavy clothi ng a nd safety be lts ... .... . 143
Hig h beam . ... .. .... . ... ...... ... .. . 46
Hig h voltage warn ing label ........... 282
Hill descent contro l ................. 112
Homelink unive rsal remote control . ... 128
Hood (re lease lever) .. .............. . 22 7
Hooks ......... .................... 67
Hor n ............................... 8
How are child restraint system anchors re-
lated to child safety .. . .. .... ...... .. 189
How many a irbags does my vehicle have? 157
How often should I che ck my tire pres-
s ur es? ... .. .... .. .. . .............. 250
How safety belt pretens ioners work .... 147
Hydrop la ni ng ..... .. . .. .. ..... ... .. 254
I
Immobilize r . . . . . . . . . . . . . . . . . . . . . . . . 27
Impo rtant t hings to do before d riving .. 130
Improperly worn safety belts .......... 146
Ind icator lights
refer to Warn ing/ indi ca to r li ghts ...... 12
Infant seats . . . . . . . . . . . . . . . . . . . . . . . 181
Installing child safety seats Safety be lts . . . . . . . . . . . . . . . . . . . . . . 186
Installing the upper te ther s trap on the
anchorage . ... .... .. . .. .. ..... ... .. 192
Instruments Adjust ing the light ing ............... 47
Instr uments and controls
General illustration . . . . . . . . . . . . . . . . . . 8
Instrument cluster . . . . . . . . . . . . . . . . . .
11
Interio r lighting
Amb ience lighting . ... .. .. .... ... .. . 47
Front and rear . .................... 47
In ter mitten t (w indshie ld w ipers) ....... 48
J
Jack .............................. 264
Jump-starting ... ................... 276
•
•