Activation/Trip B data
(Trip B enablement)
This function may be used to activate
(On) or deactivate (Off) the Trip B (partial
trip). For further information see “Trip
computer”.
Proceed as follows to switch the
function on and off:
❒press the SET/
button briefly to
make the display flash "On" or "Off"
according to what was previously set;
❒press the "
"or"
" button
to select;
❒briefly press the SET/button to
go back to the menu screen or hold
the button down to go back to the
standard screen without saving.Time adjustment
(Clock adjustment)
This function enables to set the clock
through two submenus: "Time" and
"Format".
To carry out the adjustment, proceed as
follows:
❒briefly press the SET/
button and
two submenus ("Time" and "Format")
will be displayed;
❒press button "
"or"
"to
switch between the two submenus;
❒once you have selected a sub-menu
to be modified, press
SET/
briefly;
❒when the “Time” submenu is entered,
by briefly pressing SET/
the
hours flash on the display;
❒press the "
"or"
" button
to make the adjustment;
❒briefly press the SET/button,
which makes the display flash the
"minutes";
❒press the "
"or"
" button
to make the adjustment.IMPORTANT The setting will increase or
decrease by one unit each time the
"
"or"
" button is pressed.
Hold down the button to increase/
decrease the setting rapidly and
automatically. Complete the setting by
single pressing the button when you
approach the required value.
❒When you select "Format": briefly
pressing the SET/
button makes
the display mode flash on the display;
❒press button ""or"
"
to select “24h” or “12h”.
When you have made the required
settings, briefly press the
SET/
button to go back to the
submenu screen or hold the button
down to go back to the main menu
screen without saving the new settings.
Hold the SET/
button down again
to return to the standard screen or
to the main menu according to where
you are in the menu.
95
