307
uu Fuses u Inspecting and Changing Fuses
Inspecting and Changing Fuses
1. Turn the ignition switch to LOCK (0
. Turn
headlights and all accessories off.
2. Remov
e the fuse box cover.
3. Check the large fuse in the engine
compartment.
u I
f the fuse is blown, use a Phillips-head
screwdriver to remove the screw and
replace it with a new one.
4. Inspect the small fuses in the engine
compartment and the vehicle interior.
u If
there is a burned out fuse, remove it
with the fuse puller an d replace it with a
new one.1Inspecting and Changing Fuses
NOTICEReplacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system. If you do not have a replacement
fuse with the proper rating for the circuit, install one
with a lower rating.
Replace fuse with a spare fuse of the same specified
amperage.
Confirm the specified amperage using the charts on
P. 305 and P. 306.
There is a fuse puller on the back of the engine
compartment fuse box.
Fuse Blown Fuse
Combined Fuse
Blown Fuse
Fuse Puller
14 ACURA TSX 5D-31TL76300.book 307 ページ ２０１３年６月１７日 月曜日 午後３時２１分
QRG
Index
Handling the Unexpected
TOC
2014 TSX Sport Wagon
