2014 Acura TL key

Your vehicle has a keyless access
remote slot light. The light comes on
when you:Open any door. Set the vehicle mode to VEHICLE
OFF (LOCK).
Remove the keyless access remote
f rom the keyless access remote
slot.
After all doors are closed tightly, the
light dims slightly, then f ades out in
about 30 seconds (depending on the
interior light dimming timer setting).
The light turns of f bef ore 30 seconds
have elapsed if you lock the driver’s
door.
Interior Lights
On models wit h K eyless A ccess Syst em
K eyless A ccess Remote Slot L ight
Inst rument s and Cont rols
223
LIGHTS
12/07/20 10:58:16 31TK4640_228

On models with navigation systemThe automatic climate control
system in your vehicle picks the
proper combination of air
conditioning, heating, and ventilation
to maintain the interior temperature
you select, and to remove moisture
from the air and make the interior
dry. The system also adjusts the f an
speed and airf low levels.The system automatically selects
the proper mix of conditioned
and/or heated air that will, as
quickly as possible, raise or lower
the interior temperature to your
pref erence. The system also
dehumidif ies the interior.
The driver’s side temperature and
the passenger’s side temperature can
be set separately. Push up the switch
of the appropriate temperature
control to increase the temperature
of airflow. Push down the switch to
decrease it. Each set temperature is
showninthedisplay(inthecenter
display on models with navigation
system).
Set the desired temperature with
the temperature control switch.
You can set the driver’s side
temperature and the passenger’s
side temperature separately. Press the Driver’s or Passenger’s
AUTO button. You will see AUTO
and the selected temperature on
the appropriate side of the display
(in the center display on models
with navigation system).
The climate control system f or your
vehicle can also be operated using
the voice control system. See the
navigation system manual f or
complete details.
When you unlock the doors with
your remote transmitter (keyless
access remote on models with
navigation system), the driver’s ID
(Driver 1 or Driver 2) is detected,
and the climate control settings are
turned to the respective mode
automatically with the ignition
switch in the ON (II) position, or the
power mode ON.
1.
2. Using A utomatic Climate Control
Voice Control System
Personalization Setting
Climate Control System
T emperat ure Cont rol
228
12/07/20 10:58:43 31TK4640_233

Î
CONT INUED
The security system helps to protect
your vehicle and valuables f rom thef t.
The horn sounds and a combination
of headlights, parking lights, side
marker lights and taillights f lashes if
someone attempts to break into your
vehicle or remove the audio unit.
This alarm continues for two
minutes, then the system resets. To
deactivate the system before the two
minutes have elapsed, unlock the
driver’s door with the key or use the
remote transmitter/keyless access
remote.
You can also deactivate the system
by grabbing either f ront door handle
while carrying the keyless access
remote to unlock the door.
The security system automatically
sets 15 seconds after you lock the
doors, hood, and trunk. For the
system to activate, you must lock the
doors f rom the outside with the key,or use driver’s lock tab, master door
lock switch, or remote transmitter
(keyless access remote on models
with keyless access system). The
security system indicator on the
instrument panel starts blinking
immediately to show you the system
is setting itself .Once the security system sets,
opening any door, the trunk, or hood
without using the key or the remote
transmitter/keyless access remote,
will cause the alarm to activate. It
also activates if the ignition switch
is turned to the ON (II) position, the
audio unit is removed f rom the
dashboard, or the wiring is cut.
You can also set the security system
by pressing the lock button on either
f ront door handle while carrying the
keyless access remote.
On models with keyless access system
On models with keyless access system
Security System
Features
395
SECURITY SYSTEM INDICATOR
A/T model is shown.
12/07/20 11:20:37 31TK4640_400

Î
With the system set, you can still
open the trunk with the remote
transmitter/keyless access remote
without triggering the alarm. The
alarm will sound if the trunk is
opened with the trunk release button
on the driver’s door, the trunk
release handle behind the trunk
pass-through cover, or the
emergency trunk opener.
The security system does not set if
any door, the trunk, or hood is not
f ully closed. Bef ore you leave the
vehicle, make sure the doors, trunk
and hood are securely closed.
To see if the system sets af ter you
exit the vehicle, press the LOCK
button on the remote transmitter/
keyless access remote within f ive
seconds. If the system is set, the
horn will beep once.
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II). For
more inf ormation, see pagesand .
Do not attempt to alter this system
or add other devices to it.
:
184 187
Security System
396
12/07/20 11:20:42 31TK4640_401

Î
Î
CONT INUED
BluetoothHandsFreeL ink(Models without navigation system)
Features
411
‘‘Change Language’’‘‘Hands Free Help’’
‘‘System
Set up’’
‘‘Tutorial’’ ‘‘Clear’’
‘‘Auto Transfer’’ ‘‘Call Notification’’ ‘‘Security’’
‘‘Change Passcode’’
Press HFL
Talk button
Press and release the HFL Talk button each time you give a command.
: Canadian models Apply a security passcode to the system that must be input at each key
cycle to access the system
Set how you would like to be notified of an incoming call
Hear a list of available commands and additional information describing each command (See page 420)
Change your security passcode (See page 421)
(See page 421)
Set calls to automatically transfer from your phone to HFL when you
enter the vehicle (See page 421)
Clear the system of all paired phones, phonebook entries and security
passcode (See page 422)
Change language from English to French (See page 422)
Hear a tutorial for general rules on using the system (See page 408)
(See page 408)
12/07/20 11:22:41 31TK4640_416

You can make calls using any phone
number or a name in the HFL
phonebook. You can also redial the
last number called.
Bluetooth is the wireless technology
that links your phone to HFL. HFL
uses a Class 2 Bluetooth, which
means the maximum range between
yourphoneandvehicleis30feet(10
meters).
During a call, HFL allows you to talk
up to 30 minutes af ter you remove
the key from the ignition switch.
However, this may weaken the
vehicle’s battery.Press and release the HFL Talk
button bef ore a command.
Say ‘‘ ’’ or ‘‘ .’’
Follow the HFL prompts and say
thenamestoredintheHFL
phonebook that you want to call.
Follow the HFL prompts to
conf irm the name and make the
call. Press and release the HFL Talk
button bef ore a command.
Say ‘‘ ’’ or ‘‘ .’’
Follow the HFL prompts and say
the phone number you want to dial.
Follow the HFL prompts to
conf irm the number and say
‘‘ ’’ or ‘‘ .’’
Once connected, you will hear the
person you called through the audio
speakers.
Press and release the HFL Talk
button and say ‘‘ .’’ 1.
2.
3.
1.
2.
3.
Making a Call
Call DialCall Dial
Call Dial
Redial
BluetoothHandsFreeL ink(Models without navigation system)
TomakeacallusinganameintheHFL phonebook: T o make a call using a phone
number:
To redial the last number called byHFL :
Features
415
12/07/20 11:23:27 31TK4640_420

CONT INUED
BluetoothHandsFreeL ink(Models with navigation system)
Features
429
Voice commands can be used for all above options. Voice commands for the HFL system can only be used from the
Cellular Phone screen. To quickly access the Cellular Phone screen, press the Pick-Up button on the steering wheel.
Press and release the Talk button each time you give a command.Add New Phone
Connect
Disconnect Delete
Store Voice Tag Delete
Speed Dial Store
Speed Dial
Delete Voice Tag Pass-key
Connection
Phone Setup
Edit
Speed Dial
Cellular
Phone Connect a paired phone to the system
Disconnect a paired phone from the system Pair a phone to the system
Delete a previously paired phone
Delete a previously stored speed dial number (see page 436).
(see page 435).
(see page 432).
(see page 436).
Create a Pass-key number for a paired phone (see page 435). (see page 444).
(see page 443).
(see page 443).
Select a number from the Call History, Phone Book, or manual
entry to store as a speed dial number (see page 442).
Delete a voice tag for a speed dial number Create a voice tag for a speed dial number
12/08/03 20:58:45 31TK4640_434

BluetoothHandsFreeL ink(Models with navigation system)
430
Voice commands can be used for all above options. Voice commands for the HFL system can only be used from the
Cellular Phone screen. To quickly access the Cellular Phone screen, press the Pick-Up button on the steering wheel.
Press and release the Talk button each time you give a command.Auto Answer
Auto Transfer
Phone Setup Edit Phone
Name/PIN
Cellular
Phone
Clear CellularPhone
Information (see page 439).
(see page 439). Create a phone name/PIN number for a paired phone
Set calls to automatically transfer from your phone to HFL when you enter the vehicle
Set incoming calls to be automatically answered
Clear the system of all paired phones, phonebook entries, speed dials, and pass-keys (see page 437).
(see page 439).
12/08/03 20:58:49 31TK4640_435