2014 Acura MDX wheel

67
\bNSTRUMENT PANEL \bND\bCAT\fRS
Briefly appear with each engine start. Red and amber indicators a\Nre most critical. Blue
and green indicators are used for general information. See your Owner’s \fanual for
more information.
If an indicator remains on, there may be a problem; see your dealer.
Charging system
Low brake fluid, Brake system
Low oil pressure
Vehicle Stability Assist (VSA®)
\falfunction indicator lamp(check engine light)
Tire Pressure \fonitoring System
(TP\fS) (blinks)
Collision \fitigation Braking
SystemT\f(C\fBST\f)*
Super \bandling
AllWheel Drive (S\bAWD)*
SRS(Supplemental Restraint System)
ABS (Antilock Brake System)Blind Spot Information (BSI)*
Brake system (hydraulic)
Electric Power Steering
Keyless Access System
PASSENGER AIRBAG \fFF
(next to display)
VSA \fFF
BSI* off
Immobilizer (blinks):
Use other vehicle key and see dealer
Exterior lights on
Turn signals/hazards onCRUISE
CONTROLCRUISE CONTROL on
CRUISE
MAINCRUISE \fAIN on
\bigh beams on
*if equipped
Action is needed by driver.
Parking brake on:
Release\fessage indicator:
See M\bD
Low tire pressure (stays on):
Add air
Seat belt reminder:
Fasten seat belt(s)Low fuel:
Refill
C\fBS* off
FCW* off
Lane Keeping Assist System* onAdaptive Cruise Control* on
Lane Departure Warning (LDW)*
Forward Collision Warning
(FCW)*
Malfunction \bndicatorsCondition \bndicators
\fn/\fff \bndicators
14 MDX ATG_RP1_Corre\Acted Pages_ATG Facin\Ag \b/5/2013 11\f53 \AAM Page \b

9
8MULTI-INFORMATION DISPLAY (MID)Consists of several displays that provide you with useful information.
Selector
wheelTRIP
button
Main
Displays
Lower
Displays
Accessing the MID
Average/
instant fuel economy
Vehicle
settings*
Outside temperature, Odometer Outside temperature,
Trip A Outside temperature,
Trip B
Main
display
(blank)
Range Tire pressure
monitoring system
Elapsed time Oil life
Average speed Compass or
turn-by-turn directions
SH-AWD/IDS display
(if equipped)
*You can also change Vehicle Settings using the SETTINGS button on the center panel (see page 52).
Main DisplaysLower Displays
To scroll through the different
displays:
• R
oll

the selector wheel for the
main displays.
• Press TRIP for the lower displays.
14 MDX ATG_ATG Facing 3/29/2013 12:34 PM Page 8

11
10
Default Lock Setting
The doors are preset to lock
when your vehicle reaches
about 10 mph.Default Unlock Setting
All doors are set to unlock when
the driver’s door is opened.
How It WorksAUTO DOOR LOCKSProgram how and when the vehicle doors automatically lock and unlock.
1. Turn on the vehicle. Make sure
the shift lever is in Park (P).
2. Adjust the seat, outside mirrors, and steering wheel to your
preferred positions.
4. Press the memory buttoncorresponding to the remote
(1 or 2) you are using within
5 seconds. You will hear two
beeps.
Notes:
• Once set, stored positions can be recalled by pressing one of thememory buttons (1 or 2) on the door.
• Lumbar position cannot be stored.
DRIVING POSITION MEMORY SYSTEM (DPMS)Store driver’s seat, outside mirror, and steering wheel positions into memory for each
corresponding keyless remote (1 or 2).Programming the DPMS
3. Press SET. You will hear a beep.
1. Press SETTINGS. Use theinterface dial to make and
enter selections.
2. Select Vehicle Settings.
3. Select Auto Door Lock or Auto Door Unlock.
4. Select from the options.
5. Press BACK to exit the menu.
Note: The driver’s and front passenger’s door can be opened by pulling the inner
front door handle, regardless of the setting. Changing the setting to “All Doors”
is useful for unlocking the rear doors and the power tailgate when a front door
handle is pulled.* You can also change these settings using the
multi-information display (see page 8).
Changing Settings
Follow the steps below to change your door settings. Make sure you are using the
key
you want to change settings for (Driver 1 or Driver 2) and the vehicle is on.*
14 MDX ATG_ATG Facing 3/29/2013 12:35 PM Page 10

121. Visually inspect the tires for damage.
2. Inflate the tire(s) to therecommended pressures listed on
the label on the driver’s doorjamb.
Roll the selector wheel to the
tire pressure monitor to see
which tires have low pressure.
How It WorksWhat to DoWhen the tire pressure drops significantly below recommended levels:
The low tire pressure indicator
comes on. A message appears in the MID.
TIRE PRESSURE MONITORING SYSTEM (TPMS)Monitors the vehicle’s tire pressures.
13
How It WorksINTEGRATED DYNAMICS SYSTEM (IDS)Choose a driving mode for your preference based on road conditions, vehicle speed,
and handling.
Press IDS to display the current
mode. Press it again to cycle
through the modes.
The selected mode briefly
appears in the MID.Comfort mode
Prioritizes
driving comfort
and eases
steering.Normal mode
Best for
normal,
everyday
driving.
Sport mode
Prioritizes
handling and
steering
response.
14 MDX ATG_ATG Facing 3/29/2013 12:36 PM Page 12

How It WorksHow It Works
17
16ONE-TOUCH TURN SIGNALUse this quick and convenient method to signal a lane change.AUTO HEADLIGHTS WITH WIPER INTEGRATIONFor your convenience, your vehicle’s headlights automatically turn on when the
windshield wipers operate.• Lightly push the turn signal lever upor down for a three-blink sequence.
• For a continuous signal, push the lever up or down until it locks into
place.
Make sure your headlights
are in the AUTO position.
Turn on your windshield wipers.
The headlights also turn on.
When you turn off the
windshield wipers, the headlights
turn off shortly after.
Note: Technology and Advance
packages feature rain-sensing
wipers that operate based on the
amount of detected rainfall. Put
the lever in the AUTO position
only when driving in rainy
weather. Return the lever to the
OFF position when rain stops.
See your Owner’s Manual for
more information.
MULTI-VIEW REAR CAMERAFor added convenience, the area behind your vehicle is displayed to help you navigate
while backing up.
Turn the guideline options on or off.
Wide (default) Normal Top down
1. Press SETTINGS. Use the
interface dial to make and
enter selections.
2. Select Camera Settings.
3. Select one of the options. Fixed Guidelines: Guidelines
appear when you shift into
Reverse. Select On or Off.
Dynamic Guidelines: Guidelines
move as you turn the steering
wheel. Select On or Off.
4. Press BACK to exit the menu.
How It WorksChanging Settings • When you shift into Reverse (R), a real-time image of the area behind your
v ehicle is shown in the upper display, along with helpful parking guidelines.
• The display turns off when you shift out of Reverse.
• Press the interface dial to toggle between views.
14 MDX ATG_ATG Facing 3/29/2013 12:36 PM Page 16

19
18LANE DEPARTURE WARNING (LDW)Alerts you if your vehicle begins to move out of a detected lane without the turn signal
activated. Available with Technology and Advance Packages.
A camera mounted between the windshield and the rearview mirror determines
if your vehicle begins to move away from the center of a detected lane while
driving between 40 –90 mph.Press LDW to turn the system on or off. A green indicator light appears on the
button when the system is on.LDW may not activate under certain conditions. See your Owner’s Manual for more information.LKAS may not activate under certain conditions. Do not use LKAS when towing a trailer.
See your Owner’s Manual for more information.
LANE KEEPING ASSIST SYSTEM (LKAS)Alerts you if your vehicle begins to move out of a detected lane and assists with
steering operation. Available with Advance Package.
A camera mounted between the windshield and the rearview mirror determines
if your vehicle begins to move away from the center of a detected lane while
driving between 45–90 mph.
1. Press MAIN. LKAS appears in the MID.
2. Press the LKAS button. Lane
outlines appear in the MID.
Dotted lane lines turn solid
when the system operates.
Press MAIN or the LKAS button
to turn the system off.
If you cross a detected lane line without using your turn signal,
a message appears on the MID and a beep sounds.
How It Works
How It Works
Turning the System On or Off
Turning the System On or Off
If you cross a detected lane line without using your turn signal, a message
appears on the MID and a beep sounds.
Additionally, a small amount of steering torque is applied to keep your
vehicle in the center of the lane. Keep your hands on the steering wheel and
steer the vehicle as necessary to remain in the center of the lane.
Steer the vehicle to remain in the center of the lane.
14 MDX ATG_ATG Facing 3/29/2013 12:37 PM Page 18

29
28
• To hear a list of available commands at any time, press and release the Talk button,then say “Voice help.”
• When the Talk button is pressed, all available voice commands are highlighted in yellow. To bypass the system prompts, simply press the Talk button again to say
your command.
• Speak in a clear, natural voice.
• Reduce all background noise.
• Adjust the dashboard and side vents away from the microphone in the ceiling.
• Close the windows and moonroof.VOICE RECOGNITION
Pick-Up button: Answer an incoming call
or display HFL speed dial or call history in
the MID.
Hang-Up/Back button: End or decline a
call, clear HFL information in the MID
screen, or cancel an operation.
Talk button: Give voice commands.
COLOR INFORMATION DISPLAYChoose what to display in the upper screen.
Phone
Press PHONE to display the
Phone screen.Information
Press INFO to display vehicle
information and options.Front Audio
Press FRONT AUDIO to display
the current audio screen.Rear Audio*
Press REAR AUDIO to display
and control rear audio.
*if equipped
Changing the Display
How It WorksVoice Command Tips
Navigation*
Pr

ess NAV to display the map
screen. To keep your eyes on the road and hands on the wheel, use the Talk button to say
voice commands to operate certain vehicle features.
To reduce the potential for driver distraction, certain manual functions may be
inoperable or grayed out while the vehicle is moving. Voice commands are always
available.
14 MDX ATG_ATG Facing 3/29/2013 12:38 PM Page 28

35
34Shows a more detailed view of the next maneuver during route guidance on the
multi-information display. See your Owner’s Manual for instructions on how to
turn this feature on or off.
BLUETOOTH
®HANDSFREELINK
®(HFL)
Make and receive phone calls through your vehicle’s audio system. Visit
www.acura.com/handsfreelinkto check if your phone is compatible.
To reduce the potential for driver distraction, certain manual functions may
be inoperable or grayed out while the vehicle is moving. Voice commands
are always available.
Calculated
route
Distance to go Next guidance
point
Time to go Current vehicle
location
Distance to
next maneuver
Current route Upcoming maneuver
Pick-Up button:
Answer an incoming call or
display speed dial and call history in the MID.
Hang-Up/Back button: End or decline a call,
clear HFL information in the MID, or cancel
an operation.
Selector wheel: Scroll through speed dial
and call history in the MID. Press to make a
selection.
Talk button: Make a call using a stored voice
tag, phonebook name, or phone number.
PHONE button:
Go to the phone
screen.
BACK button:
Cancel an
operation or
return to the
previous screen.
Interface Dial:
Rotate to scroll
through selections
and press to enter
a selection. MENU button:
From the Phone
screen, access
Speed Dial, Call
History,
Phonebook, and
more.
SETTINGS button:
Go to Phone
Settings to pair a
phone and set up
text/e-mail
options.
Map Screen Legend
Using HFL
Turn-by-Turn Directions
14 MDX ATG_ATG Facing 3/29/2013 12:40 PM Page 34