2014.5 VAUXHALL MOVANO_B infotainment

74Phone
this phone is outside the vehicle but
still within range of the handsfree
phone system.
During automatic connection, if a call is already in progress, the
conversation will automatically switch
to the vehicle's microphone and
loudspeakers.
If connection fails: ■ Check the phone is switched on,
■ Check the phone battery is not flat,
■ Check if the phone has already been paired.
The Bluetooth function on the mobile
phone and on the handsfree phone
system must be active and the mobile
phone must be configured to accept
the system connection request.Manual connection
R15 BT / CD15 BT, R16 BT /
CD16 BT, CD18 BT - Manual
connection
To change the phone connected to
the handsfree phone system, press
the TEL button and select the Select
Device menu. The device list shows
the phones already paired.
Select the desired phone from the list
and confirm by pressing the OK rotary
knob. A display message confirms
phone connection.
CD30 BT - Manual connection
To change the phone connected to
the handsfree phone system, press
the 0 button and select Bluetooth
connection from the settings menu.
The device list shows the phones
already paired.
Select the desired phone from the
device list, then select Connect the
device and confirm by pressing the
rotary knob. A display message
confirms phone connection.CD35 BT - Manual connection
To change the phone connected to
the handsfree phone system, press
the SETUP / TEXT button and select
Bluetooth connection (or press the
TEL button when no device is
connected). The device list shows the phones already paired.
Select the desired phone from the list
and confirm by turning and pressing
the central rotary knob. A display
message confirms phone connection.
Disconnecting a phone If the mobile phone is switched off, thephone is automatically disconnected
from the handsfree phone system.
During disconnection, if a call is
already in progress, the conversation
will automatically switch to the mobile
phone.
R15 BT / CD15 BT, R16 BT /
CD16 BT, CD18 BT - Disconnecting a phone
To disconnect a phone from the
Infotainment system, press the TEL
button (or the SETUP button) and
select Bluetooth connection . Select

Phone75
the desired device from the device listthen select Disconnect the device by
turning and pressing the OK rotary
knob. A display message confirms phone disconnection.
CD30 BT - Disconnecting a phone
To disconnect a phone from the
handsfree phone system, press the
0 button and select Bluetooth
connection from the settings menu.
Select Disconnect the device and
confirm by pressing the rotary knob.
A display message confirms phone
disconnection.
CD35 BT - Disconnecting a phone
To disconnect a phone from the
Infotainment system, press the
SETUP / TEXT button and select
Bluetooth connection . Select the
desired device from the device list
then select Disconnect the device by
turning and pressing the central rotary knob. A display message
confirms phone disconnection.Defining the priority phone
R15 BT / CD15 BT, R16 BT /
CD16 BT, CD18 BT - Defining the
priority phone
The priority phone is the last
connected phone.
When the ignition is switched on, the
handsfree phone system searches first for the priority paired phone.
Searching continues until a paired
phone is found.
CD30 BT - Defining the priority phone If defined, when the ignition is
switched on, the handsfree phone
system searches first for the priority
paired phone.
To define the priority phone, press the
0 button and select Bluetooth
connection from the settings menu.
The device list shows the phones
already paired.
Select the desired phone from the device list, then select Define priority
(number) and confirm by pressing the
rotary knob.CD35 BT - Defining the priority phone
The priority phone is the last
connected phone.
When the ignition is switched on, the handsfree phone system searches
first for the priority paired phone.
Searching continues until a paired
phone is found.
Bluetooth connection Bluetooth is a radio standard for the
wireless connection of, e.g., a
telephone with other devices.
Information such as a mobile phone
contact list and call lists can be
transferred. The functionality can be
restricted depending on the phone
model.
Prerequisites The following prerequisites must be
met, in order to control a Bluetooth-
enabled mobile phone via the
Infotainment system:
■ The Bluetooth function of the Infotainment system must be
activated.

76Phone
■ The Bluetooth function of theBluetooth-enabled mobile phone
must be activated (see mobile
phone operating instructions).
■ Dependent upon the mobile phone,
it may be required to set the deviceto "visible" (see mobile phone
operating instructions).
■ The mobile phone must be paired and connected to the Infotainment
system.
Activating Bluetooth function of
the Infotainment system To enable the Infotainment system torecognise and operate a Bluetooth-
enabled mobile phone, the Bluetooth
function must first be activated.
Deactivate the function if not
required.
R15 BT / CD15 BT, R16 BT /
CD16 BT, CD18 BT - Activating
Bluetooth
Press the TEL button and select
Bluetooth by turning and pressing the
OK rotary knob.Select ON or OFF and confirm by
pressing the knob.
CD35 BT - Activating Bluetooth Press the SETUP / TEXT button and
select Phone settings by turning and
pressing the central rotary knob.
Select Bluetooth activated or
Bluetooth deactivated and confirm by
pressing the knob.
Pairing a mobile phone to the handsfree phone system
In order to use your handsfree phone system, a connection must be set up
between the mobile phone and the system via Bluetooth, i.e. the mobile
phone must be paired to the vehicle
before using it. For this purpose, the
mobile phone must support
Bluetooth. Refer to the operating
instructions for your mobile phone.
To set up a Bluetooth connection, the handsfree phone system must be
switched on and Bluetooth must be
activated on the mobile phone.Notice
If another phone is automatically
connected during a new pairing
procedure, it will automatically be
disconnected, to allow the new
pairing procedure to continue.
Pairing enables the handsfree phone
system to recognise and store a
mobile phone in the device list. A
maximum of 5 mobile phones can be
paired and stored in the device list,
but only one can be connected at a
time.
When pairing is completed, a
message with the name of the paired
phone is shown on the Infotainment
system display screen and the phone is automatically connected to the
handsfree phone system. The mobile phone can then be operated via the
Infotainment system controls.
Notice
When a Bluetooth connection is active, using the handsfree phone
system will discharge the mobile phone battery more rapidly.

Phone77
R15 BT / CD15 BT, R16 BT /
CD16 BT, CD18 BT - Pairing a mobile
phone
To pair a phone to the handsfree
phone system, press the TEL button
and select Pair device by turning and
pressing the OK rotary knob. The
Ready to Pair screen is displayed.
On the mobile phone, search for
Bluetooth equipment in the vicinity of
the device.
Select My Radio (i.e. the name of the
handsfree phone system) from the list
on the mobile phone, then, on the
mobile phone keypad, enter the
pairing code shown on the
Infotainment system display screen.
If pairing fails, the system returns to
the previous menu and a
corresponding message is displayed. Repeat procedure if necessary.
CD30 BT - Pairing a mobile phone
To pair a phone to the handsfree
phone system, press the 0 button
and select Bluetooth connection from
the settings menu. Select an emptyslot by turning the rotary knob and
press rotary knob (or button ⊲ or ⊳) to
display the next menu.
Select Pair phone by turning and
pressing the rotary knob, then, on the
mobile phone, search for Bluetooth
equipment in the vicinity of the phone.
Select My Radiosat (i.e. the name of
handsfree phone system) from the list
on the mobile phone, and on the
mobile phone keypad enter the
pairing code shown on the
Infotainment system display screen.
If pairing fails, a tone sounds and the
message Connection has failed. is
shown on the display. Repeat
procedure if necessary.
CD35 BT - Pairing a mobile phone
To pair a phone to the handsfree
phone system, press the
SETUP / TEXT button and select
Bluetooth connection from the
settings menu. Select an empty slot
by turning the central rotary knob and press the knob to display the next
menu.Select Pair phone by turning and
pressing the central rotary knob, then,
on the mobile phone, search for
Bluetooth equipment in the vicinity of
the phone.
Select My_Radio (i.e. the name of
handsfree phone system) from the list
on the mobile phone, then on the
mobile phone keypad enter the
pairing code shown on the
Infotainment system display screen.
If pairing fails, the message Pairing
failed is displayed. Repeat procedure
if necessary.
Unpairing a mobile phone from
the handsfree phone system
If the list of paired phones is full, a new
phone can only be paired if an
existing phone is unpaired.
Notice
Unpairing a phone erases all of its
downloaded contacts and its call
history from the handsfree phone
system mobile phonebook.

Phone79
Select Emergency followed by Enter/
change number . Enter the
emergency call number (e.g. 112)
using the numerical keyboard 3 71.
Emergency call numbers vary
depending on the country or region.
Dialling the emergency call number
CD30 BT
Open the Phone menu by pressing
button 6 or TEL .
Select Emergency followed by Call to
start dialling the emergency call
number (e.g. 112).
A telephone connection to the
emergency call centre is set up.
Answer when the service personnel
questions you about the emergency.9 Warning
Do not end the call until you are
requested to do so by the
emergency call centre.
Operation
Introduction When a Bluetooth connection has
been set up between your mobile
phone and the handsfree phone
system, certain functions of your
mobile phone can be operated via the
Infotainment system controls.
It is then possible, e.g., to import the
contacts and telephone numbers stored in your mobile phone into the
handsfree phone system.
After connection, the mobile phone
data is transmitted to the handsfree
phone system. This can take some
time, depending on phone model. During this period, operation of the
mobile phone is possible via the
Infotainment system only to a limited extent.
Notice
Not every mobile phone supports
the functions of the handsfree phone
system. Therefore, deviations from
the range of functions described are possible.Phone menu
To display the Phone menu:
■ Press button 6, or
■ Press button TEL.
Volume control
R15 BT / CD15 BT, R16 BT /
CD16 BT, CD18 BT - Volume control
During a call, turn m rotary knob or
press ! or # (on the steering column
controls) to change the call volume.
CD30 BT - Volume control
To preset the volume for calls, voice
recognition or the ringtone, press the
0 button and select Phone settings
from the settings menu, followed by Volume .
Select the desired option (e.g.
Ringing volume ) and adjust the
volume with the m rotary knob (or
button ! or #). Press 0 again to save
changes and exit the menu.
During a call, turn m or press ! or #
to change the call volume.

80Phone
CD35 BT - Volume control
To preset the volume for calls, voice
recognition or the ringtone, press the
SETUP / TEXT button and select
Phone settings from the settings
menu, followed by Volume.
Select the desired option (e.g. Ringing volume ) and adjust the
volume with the central rotary knob.
During a call, turn volume rotary knob
or press ! or # (on the steering
column controls) to change the call volume.
Dialling a telephone number
Several options are available for
dialling telephone numbers, including calling a contact from the mobile
phonebook, from the vehicle
phonebook or from a call log.
Numbers can also be dialled
manually.
Display the Phone menu by pressing
the 6 or TEL button and select the
relevant option from the list.Entering a number manually
R15 BT / CD15 BT, R16 BT /
CD16 BT, CD18 BT - Entering a
number manually
With the Phone menu displayed,
select Dial from the list.
Enter the desired number using the
numerical keyboard ( 3 71 ) and select
7 to start dialling.
To redial the last number, press and
hold the TEL button.
CD30 BT - Entering a number manually
With the Phone menu displayed,
select Dial a number from the list.
Enter the desired number using the
numerical keyboard ( 3 71 ) and select
Call to start dialling.
CD35 BT - Entering a number
manually
With the Phone menu displayed,
select Dial a number from the list.Enter the desired number using the
numerical keyboard ( 3 71) then
select the y icon in the display. Press
the central rotary knob to start
dialling.
Mobile phonebook The mobile phonebook contains
contact lists available only to the
current vehicle user. For reasons of
confidentiality, each downloaded
contacts list can only be viewed when
the corresponding phone is
connected.
R15 BT / CD15 BT, R16 BT /
CD16 BT, CD18 BT - Mobile
phonebook
After pairing the mobile phone to the Infotainment system, the contact list
in the mobile telephone is
downloaded to the handsfree phone
system.
To dial a number from the mobile
phonebook, with the Phone menu
displayed, select Phonebook and
select the desired contact from the alphabetical list. Press the OK rotary
knob to start the dialling process.

84Phone
Call listsR15 BT / CD15 BT, R16 BT /
CD16 BT, CD18 BT - Call lists
To dial a number from the call history
lists (e.g. dialled numbers, received
calls, missed calls), select the
relevant option, e.g. Recent calls from
the Call list menu. Select the desired
contact and press the OK rotary knob
to start the dialling process.
CD30 BT - Call lists
To dial a number from the call history
lists (e.g. dialled numbers, received
calls, missed calls), select the
relevant option, e.g. Dialled numbers
from the Call history list menu. Select
the desired contact followed by Call
this contact , to start the dialling
process.
The call history lists are updated
automatically. They can also be
updated manually by selecting Call
history list then selecting Update from
the menu.CD35 BT - Call lists
To dial a number from the call history
lists (e.g. dialled numbers, received
calls, missed calls), select the
relevant option, e.g. Dialled calls from
the History menu. Select the desired
contact and press the central rotary
knob to start the dialling process.
Voicemail box R15 BT / CD15 BT, R16 BT /
CD16 BT, CD18 BT - Voicemail box
To listen to mobile phone voicemail
messages via the Infotainment
system, select the Voicemail box
menu.
CD30 BT - Voicemail box
To listen to mobile phone voicemail
messages via the Infotainment
system, your phone's voicemail box
number must first be entered into the
handsfree phone system.
To enter the number, with the Phone
menu displayed, select Voicemail
box from the list, followed by Enter/change number. Enter your phone's
voicemail box number using the
numerical keyboard ( 3 71).
To listen to voicemail, with the
Phone menu displayed, select
Voicemail box from the list, followed
by Call , to start the dialling process.
The voicemail box number varies
depending on the service provider.
CD35 BT - Voicemail box
To listen to mobile phone voicemail
messages via the Infotainment
system, select the Voicemail box
menu.
Receiving calls
R15 BT / CD15 BT, R16 BT /
CD16 BT, CD18 BT - Receiving calls
To accept the call, depending on
vehicle configuration:
■ Briefly press the 7 button (on the
steering column controls)
■ Select the 7 icon in the display (by
turning and pressing the OK rotary
knob)

Phone85
To reject the call, depending on
vehicle configuration:
■ Press and hold the 8 button (on the
steering column controls)
■ Select the } icon in the display (by
turning and pressing the OK rotary
knob)
When receiving a call, the caller
number may be shown on the
Infotainment system display screen. If
the number is stored in the system
memory, the name is displayed
instead. If the number cannot be
displayed, the message Private
number is shown.
CD30 BT - Receiving calls
When receiving a call, various
functions are available, including:
■ Pick up
■ Hold
■ Refuse
When receiving a call, the caller
number may be shown on the
Infotainment system display screen. If the number is stored in the system
memory, the name is displayedinstead. If the number cannot be
displayed, the message Private
number is shown.
The handsfree phone system
ringtone is dependent upon the
phone model and mode (silent,
vibrate, etc.).
Automatic call waiting
For safety reasons, the automatic call waiting function is set by default. It isrecommended that this feature
remains activated.
When an incoming call arrives, a
message alerts the caller to the fact
that you are driving. The call starts
automatically and the length of the
call is shown on the Infotainment
system display screen. Pick up the
call only when it is safe to do so.
To deactivate automatic call waiting,
refer to Activate/deactivate automatic
call waiting in the Phone settings
section.
With automatic call waiting
deactivated, it is possible to reject the
call by selecting Refuse or by
pressing and holding the 8 orMODE/OK button. To place the caller
on hold, select Hold; the caller is
informed they are on hold via an
automatic message.
Temporarily override the automatic
call waiting feature by selecting Pick
up or press the 7 or MODE/OK button
to receive the call.
CD35 BT - Receiving calls
To accept the call, briefly press the 7 button (on the steering column
controls).
To reject the call: ■ Press and hold the 8 button (on the
steering column controls), or
■ Select Refuse in the display (by
turning and pressing the central
rotary knob)
When receiving a call, the caller
number may be shown on the
Infotainment system display screen. If the number is stored in the system
memory, the name is displayed
instead. If the number cannot be
displayed, the message Unknown is
shown.