2014.5 VAUXHALL CORSA height

Vehicle care185
4. Set the jack to the necessaryheight. Position it directly below
the jacking point in a manner that
prevents it from slipping.
Variant 1:Variant 2:
Attach jack handle and with the
jack correctly aligned rotate handle until wheel is clear of theground.
5. Unscrew the wheel bolts.
6. Change the wheel.
7. Screw in the wheel bolts.
8. Lower vehicle.
9. Install the wheel wrench ensuring that it locates securely and tighten
each bolt in a crosswise
sequence. Tightening torque is
110 Nm.
10. Align the valve hole in the wheel cover with the tyre valve before
installing.
Install wheel bolt caps.
11. Stow the replaced wheel 3 177,
the vehicle tools 3 170 and the
key adapter 3 53.
12. Check the tyre pressure of the installed tyre and also the wheelbolt torque as soon as possible.
Have the defective tyre renewed or
repaired.
Spare wheel
Some vehicles are equipped with a
tyre repair kit instead of a spare
wheel.

214Technical data
Kerb weight, van, basic model with all optional equipmentCorsaEngineManual transmissionManual
transmission
automatedAutomatic
transmissionwithout/with air conditioning or electronic climate
control
[kg]A10XEP–/1230––A12XEL–/1245 16)––A12XER–/124516)–/124516)–A13DTC–/132016)––A13DTR–/135016)––16)
In conjunction with 17 inch wheels, weight decreased by 15 kg.Vehicle dimensions5-door vehicle3-door vehicleVXRVanLength [mm]3999399940403999Width without exterior mirrors [mm]1737171317131713Width with two exterior mirrors [mm]1944194419241944Height (without antenna) [mm]1488148814881488Length of load compartment floor [mm]7037037031257Length of load compartment with folded rear seats [mm]134813481348–

Technical data215
5-door vehicle3-door vehicleVXRVanLoad compartment width [mm]944944944944Load compartment height [mm]538538538538Wheelbase [mm]2511251125112511Turning circle diameter [m]10.210.210.210.2