2014.5 Citroen C4 PICASSO RHD remove seats

10
Limit the causes of excess consumption
Spread loads throughout the vehicle; place the heaviest items in the bottom   of   the   boot,   as   close   as   possible   to   the   rear   seats.
Limit
  the   loads   carried   in   the   vehicle   and   reduce   wind   resistance   (roof  
b

ars,   roof   rack,   bicycle   carrier,   trailer...).   Use   a   roof   box   in   preference.
Remove
  roof   bars   and   roof   racks   after   use.
At
  the   end   of   winter,   remove   snow   tyres   and   refit   your   summer   tyres.
Observe the recommendations on
maintenance
Check the tyre pressures regularly, when cold, referring to the label in the   door   aperture,   driver's   side.
Carry
  out   this   check   in   particular:
-
 
b
efore   a   long   journey,
-
 
a
t   each   change   of   season,
-
 
a
fter   a   long   period   out   of   use.
Don't
  forget   the   spare   wheel   and   the   tyres   on   any   trailer   or   caravan.
Have
  your   vehicle   serviced   regularly   (engine   oil,   oil   filter,   air   filter,  
p

assenger   compartment   filter...)   and   observe   the   schedule   of  
o

perations   recommended   in   the   manufacturer's   service   schedule.
With
  a   BlueHDi   Diesel   engine,   if   the   SCR   system   is   faulty   your   vehicle  
b

ecomes   polluting;   go   to   a   CITROËN   dealer   or   a   qualified   workshop  
w

ithout   delay   to   have   the   emissions   of   nitrous   oxides   brought   back   to  
t

he   legal   level.
When
  refuelling,   do   not   continue   after   the   third   cut-off   of   the   nozzle   to  
a

void   any   over flow.
At
  the   wheel   of   your   new   vehicle,   it   is   only   after   the   first   1   800   miles  
(

3 000   kilometres)   that   you   will   see   the   fuel   consumption   settle   down  
t

o a   consistent   average.
Eco-driving

83
F Pull the strap B  and   guide   the   seat  r
earwards.
The
  backrest   reclines   and   the   seat   base   pivots  
s

li g ht l y.
"Comfort" position
Returning the seat to the initial
position
F Pull the strap B   and   guide   the   seat  fo
rwards.
Super vise any movements of seats
when made by children. To
  remove   it:
- m ove   the   head   restraint   to   the   high   position,
-
 
p
ress   lug   A   pulling   the   head   restraint  
u

pwards   at   the   same   time.
The
  rear   head   restraints   can   be   removed   and  
h

ave   two   positions:
-  
h
igh,   position   for   use,
-  
l
ow,   storage   position.
To   raise   a   head   restraint,   pull   it   upwards.
To   lower   it,   press   lug   A   then   the   head   restraint.
Rear head restraints
Never drive with the head restraints r
emoved;   they   must   be   in   place   and  
c

orrectly
 adj
usted.
To
 
refit
 
it:
-
 
e

ngage
 
the
 
rods
 
of
 
the
 
head
 
restraint
 
in
 
the
 
o

penings
 
keeping
 
then
 
in
 
line
 
with
 
the
 
seat
 
b

ack.
Comfort head restraints
Depending on version, the sides can be folded t o   obtain   a   more   comfortable   position.
3
Comfort

87
Third row seats
Concertina boards
Folding the concertina boardsF Remove  the   luggage   net   (see   the   "Boot  f
ittings" se ction).
F
 
R
eturn   the   second-row   continuity   panels   to  
t

heir   initial   position   and   lock   them.
F
 
F
old   the   concertina   boards   and   position  
t

hem
 v
ertically.
F

P
ull on the strap F   located   behind   the   seat  
b

ackrest.   The   backrest   pivots   rear wards,  
p

ulling   the   seat   base   with   it.   The   seat   locks  
i

n   the   open   position.
Each of the two floor panels can
support
 
a
 
load
 
of
 
100
 
kg. Pull
 
on
 
the
 
control,
 
the
 
3
 
sections
 
of
 
the
 
board
 
w

ill
 
fold
 
like
 
a
 
concertina.
When
 
the
 
third-row
 
seats
 
are
 
upright,
 
these
 
c

oncertina
 
boards
 
can
 
be
 
left
 
either:
-
 
f

lat
 
behind
 
the
 
seats,
-
 
i

n
 
the
 
vertical
 
position,
thereby
 
leaving
 
a
 
storage
 
area
 
available.
Repositioning
the seats
Two rigid concertina boards, which cannot b
e   separated   from   the   vehicle,   cover   the  
2

  third-row   seats,   when   these   are   in   the   folded  
p

osition.
3
Comfort

120
To remove the shelf:
F  u nhook   the   two   cords,
F
 
r
aise   the   shelf   slightly,   then   remove   it.
Rear parcel shelf
There are several options for storing the shelf:
-  e ither   upright   behind   the   front   seats,
-
 
o
r   flat   at   the   base   of   the   boot.The
  hooks   can   be   used   to   secure   shopping  
b

ags.
Hooks
F Remove
  the   boot   carpet   for   access   to   the  s
torage bo xes.
Storage boxes
Depending on the configuration, they are laid out   for   storing:
-
 
w
heel   chocks,
-
 
a
  tyre   repair   kit,
-
 
t
wo   warning   triangles,
-
 ...
Comfort

232
Sit in a normal upright position.
W ear   a   correctly   adjusted   seat   belt.
Do
  not   leave   anything   between   the  
o

ccupants   and   the   airbags   (a   child,   pet,  
o

bject...).   This   could   hamper   the   operation   of  
t

he   airbags   or   injure   the   occupants.
After
  an   accident   or   if   the   vehicle   has   been  
s

tolen   or   broken   into,   have   the   airbag  
s

ystems   checked.
All
  work   on   the   airbag   system   must   be  
c

arried   out   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Even
  if   all   of   the   precautions   mentioned  
a

re   observed,   a   risk   of   injury   or   of   minor  
b

urns   to   the   head,   chest   or   arms   when   an  
a

irbag   is   deployed   cannot   be   ruled   out.   The  
b

ag   inflates   almost   instantly   (within   a   few  
m

illiseconds)   then   deflates   within   the   same  
t

ime   discharging   the   hot   gas   via   openings  
p

rovided   for   this   purpose.Front airbags
Do not drive holding the steering wheel by its spokes   or   resting   your   hands   on   the   centre  
p

art   of   the   wheel.
Passengers
  must   not   place   their   feet   on   the  
das

hboard.
Do
  not   smoke   as   deployment   of   the   airbags  
c

an   cause   burns   or   the   risk   of   injury   from   a  
c

igarette   or   pipe.
Never
 

remove
 
or
 
pierce
 
the
 
steering
 
wheel
 
or
 h

it   it   violently.
Do
  not   fit   or   attach   anything   to   the   steering  
w

heel   or   dashboard,   this   could   cause  
i

njuries   with   deployment   of   the   airbags.
For the airbags to be fully effective, observe the following safety rules: Lateral airbags
Use only approved covers on the seats, compatible   with   the   deployment   the   lateral  
a

irbags.   For   information   on   the   range   of   seat  
c

overs suitable for your vehicle, you can
contact
  a   CITROËN   dealer.
Refer
  to   the   "Accessories"   section.
Do
  not   fix   or   attach   anything   to   the   seat  
b

acks   (clothing...).   This   could   cause   injury  
t

o   the   chest   or   arms   if   the   lateral   airbag   is  
d

eployed.
Do
  not   sit   with   the   upper   part   of   the   body   any  
n

earer   to   the   door   than   necessary.
Curtain airbags
Do not fix or attach anything to the roof. This could   cause   injury   to   the   head   if   the   curtain  
a

irbag   is   deployed.
If
  fitted   on   your   vehicle,   do   not   remove   the  
g

rab   handles   installed   on   the   roof,   they   play  
a

  part   in   securing   the   curtain   airbags.
Safety

241
(a )   Universal   child   seat:   child   seat   which   can   be  i
nstalled   in   all   vehicles   using   the   seat   belt.
( b )
  
G
roup   0:   from   birth   to   10   kg.   Infant   car   seats  
a

nd   "car   cots"   cannot   be   installed   on   the  
f

ront   passenger   seat.   When   installed   in   the  
2nd row, they may prevent use of the other seats.
( c )
  
C

onsult   the   legislation   in   force   in   your  
c

ountry   before   installing   your   child   on  
this
 sea

t.
( d )
  
T

o
  install   a   child   seat   on   a   rear   seat,  
r

ear ward   facing   or   for ward   facing,   move  
t

he   front   seat   for ward,   then   straighten   the  
b

ackrest   to   allow   enough   space   for   the   child  
s

eat   and   the   child's   legs.
( e )
  
T

o
  install   a   child   seat   on   a   rear   seat,  
r

ear ward   facing   or   for ward   facing,   adjust   the  
r

ear   seat   to   the   fully   back   position,   with   the  
b

ackrest   upright. Remove
  and   stow   the   head   restraint  
b

efore   installing   a   child   seat   on   a  
p

assenger   seat.   Refit   the   head   restraint  
o

nce   the   child   seat   has   been   removed.
U
:   
s
eat   suitable   for   the   installation   of   a   child  
s

eat   secured   using   the   seat   belt   and  
u

niversally   approved   rear ward   facing   and/
or   for ward   facing,   with   the   passenger   seat  
a

djusted   to   the   midway   longitudinal   position.
U(R) :   s ame   as   U
,   with   the   passenger's   seat  a
djusted   to   the   low   position   with  
11
  actions   on   the   height   control   lever   and  
i

n   the   midway   longitudinal   position.
6
Safety

243
(a )   Universal   child   seat:   child   seat   which   can   be  i
nstalled   in   all   vehicles   using   the   seat   belt.
( b )
  
G
roup   0:   from   birth   to   10   kg.   Infant   car   seats  
a

nd   "car   cots"   cannot   be   installed   on   the  
f

ront   passenger   seat   or   in   the   3
rd row. When i
nstalled
 
in
 
the
 
2nd row, they may prevent u
se
 
of
 
the
 
other
 
seats.
( c )
  
C

onsult
 
the
 
legislation   in   force   in   your  
c

ountry
 
before
 
installing   your   child   on  
this
 sea

t.
( d )
  
T

o
 
install
 
a
 
child
 
seat   on   a   rear   seat,  
r

ear ward
 
facing
 
or   for ward   facing,   move  
t

he
 
front
 
seat
 
for ward,   then   straighten   the  
b

ackrest
 
to
 
allow
 
enough   space   for   the   child  
s

eat
 
and
 
the
 
child's   legs.
( e )
  
T

o
 
install
 
a
 
child
 
seat   on   a   rear   seat,  
r

ear ward
 
facing
 
or   for ward   facing,   adjust   the  
r

ear
 
seat
 
to
 
the
 
fully   back   position,   with   the  
b

ackrest
 
upright. Remove
  and   stow   the   head   restraint  
b

efore   installing   a   child   seat   on   a  
p

assenger   seat.   Refit   the   head   restraint  
o

nce   the   child   seat   has   been   removed.
U
:   
s
eat   suitable   for   the   installation   of   a   child  
s

eat   secured   using   the   seat   belt   and  
u

niversally   approved   rear ward   facing   and/
or   for ward   facing,   with   the   passenger   seat  
a

djusted   to   the   midway   longitudinal   position.
U(R) :   s ame   as   U
,   with   the   passenger's   seat  a
djusted   to   the   low   position   with  
11
  actions   on   the   height   control   lever   and  
i

n   the   midway   longitudinal   position.
6
Safety

244
"ISOFIX" mountings
Your vehicle has been approved in accordance with the latest ISoFI X regulations .
The   seats,   represented   below,   are   fitted   with   regulation   ISOFIX   mountings:
-
 
t
wo   rings   A,
  located   between   the   vehicle  
s

eat   back   and   cushion,   indicated   by   a  
m

arking, -
 a

  ring   B,
  located   under   a   cover   on   the   back
 o

f   the   top   of   the   seat   backrest,   referred   to   as
 t

he TOP TETHER
  for   fixing   the   upper   strap.
 I

ts   position   is   indicated   by   a   marking.
Located
  on   the   back   of   the   seat   backrest,   the  
t

op   tether   is   used   to   secure   the   upper   strap   of  
c

hild   seats   that   have   one.   This   device   limits  
f

or ward   tipping   of   the   child   seat,   in   the   event   of  
a

  front   impact.The
  incorrect   installation   of   a   child   seat  
i

n   a   vehicle   compromises   the   child's  
p

rotection   in   the   event   of   an   accident.
Observe
  strictly   the   fitting   instructions  
p

rovided   with   the   child   seat.
For
  information   on   the   possibilities  
f

or   fitting   ISOFIX   child   seats   to   your  
v

ehicle,   refer   to   the   table   of   seating  
p

ositions.
The ISOFIX mountings are three rings for each seat:
This ISOFIX mounting system ensures fast, reliable   and   safe   fitting   of   the   child   seat   in   your  
v

ehicle.
The ISOFIX child seats
  are   fitted   with   two  
l

atches   which   are   secured   easily   on   the   two  
r

ings
 A .
S

ome   also   have   an   upper strap (or top tether)
which
  is   attached   to   ring   B. To
  secure   the   child   seat   to   the   TOP TETHER
:
-  
r
emove   and   stow   the   head   restraint   before  
i

nstalling   the   child   seat   on   this   seat   (refit   it  
a

fter   the   child   seat   has   been   removed),
-  
r
emove   the   TOP TETHER   cover   by   pulling  
a

t   its   cut-out,
-  
p
ass   the   child   seat   strap   behind   the   seat  
b

ackrest,   centred   between   the   holes   for   the  
h

ead   restraint   rods,
-  
s
ecure   the   upper   strap   fixing   to   the   ring   B,
-  
t
ighten   the   upper   strap.
Safety