2014.5 Citroen C4 PICASSO RHD warning

135
Special cases
Application of of the parking brake is   confirmed   by   illumination   of   the  
b

rake   indicator   lamp   and   the   P
indicator
  lamp   in   the   control   lever,  
a

ccompanied   by   the   display   of   the  
m

essage   "Parking   brake   applied". The
  complete   release   of   the   parking  
b

rake   is   confirmed   by   the   brake  
i

ndicator   lamp   and   the   P   indicator  
l

amp   in   the   control   lever   going   off,  
a

ccompanied   by   the   display   of   the  
m

essage   "Parking   brake   released".
In
 
some
 
situations,   you   may   need   to   operate  
t

he
 
parking   brake   manually.
Immobilisation of the vehicle
with the engine running
To immobilise the vehicle with the engine r
unning,   briefly   pull   the   control   lever.
Parking the vehicle with the
brake released
In very cold conditions, it is recommended   that   the   parking   brake  
n

ot   be   applied   (risk   of   freezing).
To
  immobilise   your   vehicle,   engage   a  
g

ear   or   fit   a   chock   to   one   of   the   wheels.
Immobilisation of the vehicle with the
parking brake released
F
 
S

witch   off   the   engine.
 I

llumination   of   the   warning   lamps   in   the  
i

nstrument   panel   and   control   lever   confirm  
a

pplication   of   the   parking   brake.
F
 
S

witch   on   the   ignition   again,   without  
s

tarting   the   engine.
F
 
R

elease   the   parking   brake   manually   by  
p

ushing   the   control   lever   while   keeping  
y

our   foot   on   the   brake. F
 
S
witch   off   the   ignition.
4
Driving

136
Emergency braking
In the event of a failure of the main service brake   or   in   an   exceptional   situation   (e.g.   driver  
t

aken   ill,   under   instruction,   etc)   a   continuous  
p

ull   on   the   control   lever   will   brake   the   vehicle.  
B

raking   takes   place   while   the   control   lever   is  
b

eing   pulled.   It   is   interrupted   if   the   control   lever  
i

s
 r
eleased.
The
  ABS   and   DSC   systems   provide   stability   of  
t

he   vehicle   during   emergency   braking.
If
  the   emergency   braking   malfunctions,   the  
m

essage   "Parking   brake   control   faulty"   will   be  
d

isplayed.
If
  a   failure   of   the   ABS   and   DSC   systems  
o

ccurs,   signalled   by   the   illumination   of   one  
o

r   both   warning   lamps   in   the   instrument  
p

anel,   then   stability   of   the   vehicle   is   no   longer  
g

uaranteed.
In
  this   event,   stability   must   be   assured   by   the  
d

river   by   repeating   alternate   "pull-release"  
a

ctions on the control lever until the vehicle is
immobilised. The
  emergency   braking   should   only   be  
u

sed   in   an   exceptional   situation.
Repeat
 
this
 
procedure
 
to
 
reactivate
 
automatic
 
ope

ration.
Reactivation
 
of
 
automatic
 
operation
 
is
 
c

onfirmed
 
by
 
the
 
indicator
 
lamp
 
in
 
the
 
i

nstrument
 
panel
 
going
 
off.
Deactivating automatic
operation
In some situations, such as very cold weather o r   towing   (caravan,   recovery),   it   may   be  
n

ecessary   to   deactivate   automatic   operation   of  
t

he   system.
F
 
S
tart   the   engine.
F
 
A
pply   the   parking   brake   with   the   control  
l

ever,   if   it   is   released.
F
 
T
ake   your   foot   off   the   brake   pedal.
F
 
P
ush   and   hold   the   control   lever   in   the  
r

elease   direction   for   at   least   10   seconds  
a

nd   no   more   than   15   seconds.
F
 
R
elease   the   control   lever.
F
 
P
ress   and   hold   the   brake   pedal.
F
 
P
ull   the   control   lever   in   the   apply   direction  
f

or   2   seconds.
Deactivation
  of   the   automatic   functions
 i

s   confirmed   by   illumination   of   this
 i

ndicator   lamp   in   the   instrument   panel.
F
 
R
elease   the   control   lever   and   the   brake  
ped

al. From
  this   point   the   parking   brake   can   only  b
e   applied   and   released   manually   using   the  
c

ontrol   lever.
Driving

138
SituationsConsequences
Display
 
of
 
the
 
message
 
" Parking brake fault "
  and   of   the  
fo

llowing
 w

arning
 lam

ps: The
  Parking   Brake   is   faulty,   the   manual   and   automatic   functions   may   not   operate.
When stationary ,
  to   immobilise   your   vehicle:
-
 
P
ull   and   hold   the   control   lever   for   about   7   to   15   seconds,   until   the   warning   lamp  
c

omes   on   in   the   instrument   panel.
If
  this   procedure   does   not   work,   you   should   make   your   vehicle   safe:
-
 
P
ark   on   a   level   sur face.
-
 
E
ngage   a   gear   with   a   manual   or   electronic   gearbox,   or   place   the   gear   selector   in  
p

osition P   with   an   automatic   gearbox.
-
 
I
f   possible,   fit   a   wheel   chock.
Call
  on   a   CITROËN   dealer   or   a   qualified   workshop.
Display
 
of
 
the
 
message
 
" Parking brake fault "
  and   of   the  
fo

llowing
 w

arning
 lam

ps: -
 
T
he   parking   brake   does   not   have   its   full   per formance   to   securely   hold   the   vehicle  
i

n   all   situations.
You
  should   make   your   vehicle   safe:
-
 
P
ark   on   a   level   sur face.
-
 
E
ngage   a   gear   with   a   manual   or   electronic   gearbox,   or   place   the   gear   selector   in  
p

osition P   with   an   automatic   gearbox.
-
 
I
f   possible,   fit   a   wheel   chock.
Call
  on   a   CITROËN   dealer   or   a   qualified   workshop.
The
  flashing   of   the   P   warning   lamps   on   starting   the   vehicle   indicates   that   the   parking  
b

rake   is   not   correctly   applied.
As
  soon   as   possible,   stop   the   vehicle   and   try   to   completely   release   the   parking   brake,  
u

sing   the   control   lever,   with   your   foot   on   the   brake   pedal.
Display
 
of
 
the
 
message
 
" Battery fault "
  and   the   following  
w

arning
 lam

p: -
 
T
he   state   of   charge   of   the   battery   is   very   low   and   requires   immobilisation   of   the  
v

ehicle   in   a   safe   place:   engage   a   gear   with   a   manual   gearbox   or   fit   a   chock   to  
o

ne   of   the   wheels.
-
 
O
nce   the   battery   is   completely   discharged,   the   controls   do   not   operate:   to  
r

elease   the   parking   brake,   call   on   a   CITROËN   dealer   or   a   qualified   workshop.
Driving

139
Hill start assist
System which keeps your vehicle immobilised temporarily   (approximately   2   seconds)   when  
s

tarting   on   a   gradient,   the   time   it   takes   to  
m

ove   your   foot   from   the   brake   pedal   to   the  
a

ccelerator
 ped
al.
This
  system   only   operates   when:
-
 
t
he   vehicle   is   completely   stationary,   with  
y

our   foot   on   the   brake   pedal,
-
 
c
ertain   conditions   of   slope   are   met,
-
 
w
ith   the   driver’s   door   closed.
The
  hill   start   assist   system   cannot   be  
d

eactivated.
On an ascending slope, with the vehicle
stationar y, the vehicle is held for a
momentarily when you release the brake pedal:
- provided   you   are   in   first   gear   or   neutral   on  a
  manual   gearbox,
-
 
p
rovided   you   are   in   position   A or M on an
electronic
 ge

arbox,
 D
or M   on   an   automatic  
g

earbox.
Operation
On a descending slope, with the vehicle
stationary and reverse gear engaged, the
vehicle is held momentarily when you
release the brake pedal.
Operating fault
If a fault in the system occurs, these warning lamps   come   on,   accompanied   by   an   alert  
m

essage.   Contact   a   CITROËN   dealer   or  
a

  qualified   workshop   to   have   the   system  
c

hecked.
Do
 
not
 
exit
 
the
 
vehicle
 
while
 
it
 
is
 
being
 
h

eld
 
in
 
the
 
hill
 
start
 
assist
 
phase.
If
 
you
 
need
 
to
 
exit
 
the
 
vehicle
 
with
 
t

he
 
engine
 
running,
 
apply
 
the
 
parking
 
b

rake
 
manually
 
then
 
ensure
 
that
 
the
 
p

arking
 
brake
 
warning
 
lamp
 
(and
 
the
 
w

arning
 lam

p
 P

in the lever of the
electric
 
parking
 
brake)
 
are
 
on
 
fixed
 
(not
 
f

lashing).
4
driving

142
Displays in the instrument panel
N. neutral
R. R everse
M.

(
gear engaged)
Manual mode.
AUTO or A.
 A
utomated   mode. If the engine does not star t:
If N
  flashes   in   the   instrument   panel,  
a

ccompanied   by   an   audible   signal   and  
a

  message,   move   the   selector   lever   to  
p

osition A then to position N
.
Moving off
F Select position N.
F  P ress   the   brake   pedal   down   fully.
F
 
S
tart   the   engine.
N
  appears   in   the   instrument   panel  
sc

reen. F
 S elect   automated   mode   (position   A
) or
manual   mode   (position   M) or reverse
(position R ).
F
 
R
elease   the   parking   brake   by   pulling   the  
c

ontrol   lever,   if   automatic   operation   has  
b

een
 d
eactivated.
F
 
P
rogressively   take   your   foot   off   the   brake  
ped

al.
F
 
I
f   the   parking   brake   is   released,   the   vehicle  
m

oves   off.
 I

f   the   parking   brake   is   applied   and   the  
a

utomatic   mode   is   activated,   accelerate  
p

rogressively.A or AUTO
 

and   1, 1 or R
  is   displayed  
i

n   the   instrument   panel.
If the Foot on brake
warning
  lamp   comes   on  
t

he   instrument   panel,  
a

ccompanied   by   an   audible   signal   and  
a

  message   "Foot   on   brake",   press   the  
b

rake   pedal   firmly. If
  the   brake   does   not   release  
a

utomatically,   check   that   the   front   doors  
a

re   correctly   closed.
Driving

146
+. Control  paddle   for   changing   up,   to   the   right  o
f   the   steering   wheel.
F

P
ull the " +"
  paddle   towards   you   to   change  
u

p.
-.
 C

ontrol   paddle   for   changing   down,   to   the  
l

eft   of   the   steering   wheel.
F

P
ull the " -"
  paddle   towards   you   to   change  
d

own.
Steering mounted control paddles
The steering mounted control paddles cannot   be   used   to   select   neutral   or   to  
s

elect   or   come   out   of   reverse. When
  you   move   the   gear   selector,   the   symbol  
c

orresponding   to   its   position   is   displayed   in   the  
in

strument
 pan
el.
P.
 Pa
rk.
R.
 R
everse.
N.
 N
eutral.
D.
 D
rive   (automatic   for ward   drive).
1 to 6.  
G
ears   engaged   in   manual   operation.
-.
 I
nvalid   value   in   manual   operation.
Displays in the instrument panelMoving off
F With
  your   foot   on   the   brake   pedal,   select  p
osition P or N .
F
 
S
tart   the   engine.
If P
  is   displayed   in   the   instrument   panel,  
a

lthough   the   gear   selector   is   in   another  
p

osition,   place   the   gear   selector   in  
p

osition P   to   be   able   to   start   the   engine.
F
 
W
ith   the   engine   running,   press   the   brake  
ped

al.
F
 
S
elect   automated   mode   (position   D),
manual
  mode   (position   M) or reverse
(position R ).
If
  you   do   not   press   the  
b

rake   pedal   to   come   out   of  
p

osition P,
  this   warning   lamp  
O
ther wise,   there   is   an   audible   signal  
a

ccompanied   by   a   message.
or
  symbol   appears   in   the   instrument  
p

anel,   accompanied   by   the   message  
"

Place   automatic   gearbox   in   position P",
flashing
  of   P   in   the   instrument   panel  
a

nd   an   audible   signal.
Driving

149
Before switching off the engine, you can change   to   position   P or N   to   be   in   neutral.  
I

n   either   case,   apply   the   parking   brake   to  
i

mmobilise   the   vehicle,   unless   it   is   programmed  
i

n   automatic   mode.
If the lever is not in position P ,
  on   opening   the  
d

river's   door   or   approximately   45   seconds   after  
s

witching   off   the   ignition   there   is   an   audible  
s

ignal   and   a   message   appears:
F
 
m
ove   the   gear   selector   to   position   P;  
t

he audible   signal   stops   and   the   message  
d

isappears.
Operating fault
Whenever parking, you must apply the parking brake   to   immobilise   the   vehicle,   if   automatic  
o

peration   has   been   deactivated.
Parking the vehicle
In all circumstances, ensure that the gear   selector   is   in   position   P before
leaving
  your   vehicle. In the event of a fault with the
gearbox,
  the   service   warning   lamp  
c

omes   on   in   the   instrument   panel,  
a

ccompanied   by   a   message   and   an  
a

udible
 s
ignal.
In   this   case   the   gearbox   goes   into   back-up  
m

ode   and   stays   in   3
rd gear. You may then feel a
 
noticeable
 
jolt
 
when   going   from   P to R   and  
f

rom N to R .
 
This
 
jolt
 
does   not   present   any   risk  
t

o
 
the
 
gearbox.
Do
 
not
 
exceed
 
60
 
mph   (100   km/h)   while   also  
o

bserving
 
legal
 
speed   limits.
Have
 
it
 
checked
 
by
 
a
  CITROËN   dealer   or   a  
q

ualified
 w

orkshop.
In the event of a battery failure, use the
chock
 
to
 
immobilise
 
the
 
vehicle.
4
Driving

151
Stop & Start
The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). 
T he   engine   restarts   automatically   -   START   mode   -   as   soon   as   you   want   to   move   off.   The   restart   takes   place   instantly,   quickly   and   silently.
Operation
Going into engine STOP
mode
The "ECO" warning   lamp   comes   on   in   the  i
nstrument   panel   and   the   engine   goes   into  
s

tandby
 a
utomatically:
-
 
w
ith a manual gearbox,   at   speeds   below  
1

2   mph   (20   km/h),   or   vehicle   stationary  
(

with   e-THP   130   and   165   petrol   versions  
a

nd   BlueHDi   100,   115   and   120   versions),  
w

hen   you   place   the   gear   lever   in   neutral,  
a

nd   you   release   the   clutch   pedal,
-
 
w
ith an electronic gearbox,   at   speeds  
b

elow   5   mph   (8   km/h),   when   you   press   the  
b

rake   pedal   or   place   the   gear   selector   lever  
i

n position N ,
-
 
w
ith an automatic gearbox, with the
vehicle stationary, when you press the
brake
  pedal   or   place   the   gear   selector   lever  
i

n position N . Never
  refuel   with   the   engine   in   STOP  
m

ode;   you   must   switch   off   the   ignition  
w

ith   the   START/STOP   button.
For
  your   comfort,   during   parking  
m

anoeuvres,   STOP   mode   is   not  
a

vailable   for   a   few   seconds   after  
c

oming   out   of   reverse   gear.
STOP
  mode   does   not   affect   the  
f

unctionality of the vehicle, such as for
example,
  braking,   power   steering...
Special cases: STOP mode not
available
STOP mode is not invoked when:
-  t he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   using  
t

he   START/STOP   button,
-
 
t
he   electric   parking   brake   is   applied   or  
be

ing
 a
pplied,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, the "ECO"
 

warning   lamp  
f

lashes   for   a   few   seconds   then   goes  
o

f f.
This operation is perfectly normal.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust
 
emissions
 
as
 
well
  as   the   noise   level   when   stationary.
If
 
your
 
vehicle
 
is
 
fitted
 
with
 
the
 
system,
 
a
 
time
 c
ounter
 
calculates
 
the
 
sum
 
of
 
the
 
periods
 
in
 
S

TOP
 
mode
 
during
 
a
 
journey.
 
It
 
resets
 
itself
 
to
 
z

ero
 
every
 
time
 
the
 
ignition
 
is
 
switched
 
on
 
with
 
t

he
 
START/STOP
 
button.
4
driving