2014.5 Citroen C4 PICASSO RHD light

128
Starting-switching off the engine with the "Keyless Entry 
a
nd Starting"   system
F Place  the   gear   selector   lever   at   N for
vehicles   with   an   electronic   gearbox,   P or N
with
  an   automatic   gearbox,   or   neutral   with  
a m

anual
 g
earbox.
F
 
W
ith   the   electronic   key   inside   the   vehicle  
(

it   is   not   necessary   to   put   it   in   the   reader),  
p

ress   the   brake   pedal   for   vehicles   with  
a

n   electronic   or   automatic   gearbox,   or  
f

ully   declutch   for   vehicles   with   a   manual  
g

earbox. For Diesel vehicles
, in
temperatures   below   zero   the  
e

ngine   will   not   start   until   the  
p

reheater   warning   lamp   has  
g

one   off.
If
  this   warning   lamp   comes   on  
a

fter   pressing   "START/STOP",  
y

ou   should   hold   the   brake   or  
c

lutch   pedal   down   until   the  
w

arning   lamp   goes   off   and   do  
n

ot   press   the   START/STOP  
bu

tton
 ag
ain.
Starting the engine
If one of the starting conditions is not met,   a   reminder   message   appears   in t

he   instrument   panel   screen.   In   some
 c

ircumstances,   it   is   necessary   to   turn
 t

he   steering   wheel   slightly   while   pressing
 t

he   "START/STOP"   button   to   assist
 u

nlocking   of   the   steering;   a   message
 w

arns   you   when   this   is   needed.
F
b
r
iefly press the "
START/STOP"
button.
 T
he   steering   column   unlocks  
a

nd   the   engine   starts   more   or  
l

ess   instantly   (see   the   advice   for  
D

iesel
 v
ersions).
The   presence   of   the   "Keyless   Entry   and  
S

tarting"   system   electronic   key   in   the  
r

ecognition   zone   is   essential.
For
  safety   reasons,   do   not   leave   this  
z

one   with   the   vehicle   running. If
  the   electronic   key   is   not   detected   in  
t

he   zone,   a   message   is   displayed.   Move  
t

he   electronic   key   into   the   zone   so   that  
t

he   engine   can   be   started.
Driving

151
Stop & Start
The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). 
T he   engine   restarts   automatically   -   START   mode   -   as   soon   as   you   want   to   move   off.   The   restart   takes   place   instantly,   quickly   and   silently.
Operation
Going into engine STOP
mode
The "ECO" warning   lamp   comes   on   in   the  i
nstrument   panel   and   the   engine   goes   into  
s

tandby
 a
utomatically:
-
 
w
ith a manual gearbox,   at   speeds   below  
1

2   mph   (20   km/h),   or   vehicle   stationary  
(

with   e-THP   130   and   165   petrol   versions  
a

nd   BlueHDi   100,   115   and   120   versions),  
w

hen   you   place   the   gear   lever   in   neutral,  
a

nd   you   release   the   clutch   pedal,
-
 
w
ith an electronic gearbox,   at   speeds  
b

elow   5   mph   (8   km/h),   when   you   press   the  
b

rake   pedal   or   place   the   gear   selector   lever  
i

n position N ,
-
 
w
ith an automatic gearbox, with the
vehicle stationary, when you press the
brake
  pedal   or   place   the   gear   selector   lever  
i

n position N . Never
  refuel   with   the   engine   in   STOP  
m

ode;   you   must   switch   off   the   ignition  
w

ith   the   START/STOP   button.
For
  your   comfort,   during   parking  
m

anoeuvres,   STOP   mode   is   not  
a

vailable   for   a   few   seconds   after  
c

oming   out   of   reverse   gear.
STOP
  mode   does   not   affect   the  
f

unctionality of the vehicle, such as for
example,
  braking,   power   steering...
Special cases: STOP mode not
available
STOP mode is not invoked when:
-  t he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   using  
t

he   START/STOP   button,
-
 
t
he   electric   parking   brake   is   applied   or  
be

ing
 a
pplied,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, the "ECO"
 

warning   lamp  
f

lashes   for   a   few   seconds   then   goes  
o

f f.
This operation is perfectly normal.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust
 
emissions
 
as
 
well
  as   the   noise   level   when   stationary.
If
 
your
 
vehicle
 
is
 
fitted
 
with
 
the
 
system,
 
a
 
time
 c
ounter
 
calculates
 
the
 
sum
 
of
 
the
 
periods
 
in
 
S

TOP
 
mode
 
during
 
a
 
journey.
 
It
 
resets
 
itself
 
to
 
z

ero
 
every
 
time
 
the
 
ignition
 
is
 
switched
 
on
 
with
 
t

he
 
START/STOP
 
button.
4
driving

176
Lane departure warning system
System which, using a camera which recognises   solid   or   broken   lines,   detects   the  
i

nvoluntary   crossing   of   longitudinal   traffic   lane  
m

arkings   on   the   ground.
To
  provide   safe   driving,   the   camera   analyses  
t

he   image   then,   if   the   driver's   attention   drops,  
t

riggers   a   warning   if   the   vehicle   drifts   over  
a

  lane   marking   (speed   higher   than   50   mph  
(

80 km/h)).
This
  system   is   particularly   useful   on   motor ways  
a

nd   main   roads. Activation
  and   deactivation   of   the   function   is  
d

one   in   the   "
Driving assistance "   menu   of   the  
t

ouch   screen   tablet.
Activation / deactivation
The driver is alerted by vibration of the seat belt (
at   the   level   of   the   reel).
No
  warning   is   transmitted   while   the   direction  
i

ndicator   is   active   and   for   approximately  
2

0 seconds   after   the   direction   indicator   is  
s

witched   off.
Detection - alert
The lane departure warning system cannot,   in   any   circumstances,   replace  
t

he   need   for   vigilance   and   responsibility  
o

n   the   part   of   the   driver. F

Press this button, the indicator lamp c
omes   on.   The   function   is   activated
The detection may be impeded:
-  i f   the   markings   on   the   ground   are  
w

orn,
-
 
i
f   there   is   little   contrast   between   the  
m

arkings   on   the   ground   and   the  
r

oad   sur face,
-
 
i
f   the   windscreen   is   dirty,
-
 i

n
 c
ertain
 se
vere
 w
eather
 c
onditions:
 f

og,   heavy   rain,   snow,   bright   sunlight
 o

r   direct   exposure   to   the   sun   (low
 s

un,   leaving   a   tunnel,   ...)   and   shade.
In
  the   event   of   a   fault,   the   symbol  
f

or   the   button   changes   to   alert  
m

ode   and   the   warning   lamp   flashes  
f

or   a   few   moments   then   goes   off.
Operating fault
Contact a CITROËN dealer or a qualified w
orkshop.
The
 
status
 
of
 
the
 
system
 
remains
 
in
 
the
 
m

emory
 
when
 
the
 
ignition
 
is
 
switched
 
off.
It
 
is
 
necessary
 
to
 
observe
 
the
 
driving
 
r

egulations
 
and
 
to
 
take
 
a
 
break
 
every
 
t

wo
 
hours. F
 
P

ress
 
this
 
button
 
again,
 
the
 
i

ndicator
 
lamp
 
goes
 
off.
 
The
 
f

unction
 
is
 
deactivated
Driving

178
The alert is given by a warning lamp which comes   on   in   the   door   mirror   on   the   side   in  
q

uestion   as   soon   as   a   vehicle   -   car,   lorry,  
b

icycle   -   is   detected   and   the   following  
c

onditions   are   fulfilled:
-
 
a
ll   the   vehicles   must   be   moving   in   the  
s

ame   direction   and   in   adjacent   lanes,
-
 
t
he   speed   of   your   vehicle   is   between   7   and  
87

  mph   (12   and   140   km/h),
-
 
y
ou   overtake   a   vehicle   with   a   speed  
d

ifference   of   less   than   6   mph   (10   km/h),
-
 
a
  vehicle   overtakes   you   with   a   speed  
d

ifference   of   less   than   15   mph   (25   km/h),
-
 
t
he   traffic   must   be   flowing   normally,
-
 
i
n   the   case   of   an   overtaking   manoeuvre,  
i

f   this   is   prolonged   and   the   vehicle   being  
ov

ertaken   remains   in   the   blind   spot,
-
 
y
ou   are   driving   on   a   straight   or   slightly  
c

urved   road,
-
 
y
our   vehicle   is   not   pulling   a   trailer,  
a

 caravan... No
  alert   will   be   given   in   the   following   situations:
-
 
i
n   the   presence   of   non-moving   objects  
(

parked   vehicles,   barriers,   street   lamps,  
r

oad
 s
igns...),
-
 
w
ith   vehicles   moving   in   the   opposite  
d

irection,
-
 
d
riving   on   a   sinuous   road   or   a   sharp  
c

o r n e r,-
 
w
hen   overtaking   (or   being   overtaken   by)   a  
v

ery   long   vehicle   (lorry,   coach...)   which   is  
a

t   the   same   time   detected   at   the   rear   in   the  
b

lind   spot   angle   and   present   in   the   driver's  
f

or ward   field   of   vision,
-
 
i
n   very   heavy   traffic:   vehicles   detected   in  
f

ront   and   behind   are   confused   with   a   lorry  
o

r   a   stationary   object,
-
 
w
hen   overtaking   quickly.
driving

183
360 Vision
This system provides a view in the instrument panel   of   the   near   surroundings   of   your   vehicle,  
u

sing   cameras   mounted   at   the   front   and   rear   of  
y

our   vehicle   and   under   the   door   mirrors.
Depending
  on   the   angle   of   view   chosen   (front  
v

iew,   rear   view   or   360°   panoramic   view),  
3

60 Vision   provides   special   visual   assistance  
i

n   particular   driving   conditions   such   as   when  
e

ntering   a   blind   crossing   or   manoeuvring   in  
a

reas   of   reduced   visibility.
Once
  activated,   this   function   operates   up   to  
9 m

ph   (15   km/h).   Above   18   mph   (30   km/h),   the  
f

unction   is   deactivated   automatically. This
  system   is   a   visual   aid   which   in   no  
c

ircumstances   can   replace   the   need   for  
v

igilance   on   the   part   of   the   driver.
The   images   provided   by   the   cameras  
m

ay   be   deformed   by   the   relief.   The  
p

resence   of   areas   in   shade,   in   sunny  
c

onditions,   or   of   low   ambient   light   may  
d

arken   the   image   and   reduce   contrast.
Forward vision
The camera located in the front bumper is a
ctivated   and   views   of   the   areas   located   at  
f

ront   left   and   front   right   appear   simultaneously  
i

n   the   instrument   panel.
Rear vision
The camera located in the tailgate is activated and   the   view   of   the   area   behind   your   vehicle   is  
d

isplayed   in   the   instrument   panel   and   behaves  
l

ike   a   reversing   camera,   whatever   the   position  
o

f   the   gear   selector   lever.
The
  blue   lines   represent   the   width   of   your  
v

ehicle   (excluding   mirrors):   they   move  
a

ccording   to   the   position   of   the   steering   wheel.
The
  red   line   represents   a   distance   of   30   cm  
f

rom   the   rear   bumper,   and   the   two   green  
l

ines,   1   m   and   2   m   from   the   rear   bumper,  
r

espectively. Rear
  vision   is   displayed   automatically  
w

hen   engaging   reverse,   regardless   of  
t

he   state   of   the   system.
4
Driving

184
Operation
Activating the function
With the engine running:
F Sel ect the " Driving assistance "
  menu   of  
t

he   touch   screen   tablet.
With
  this   menu   displayed,   select   one   of   the  
t

hree   views:
Deactivating the function
F Accelerate   so   as   to   exceed   18   mph  (
30 km/h).
or
F

Sel
ect the " Driving assistance "
  menu   of  
t

he   touch   screen   tablet.
Check
  the   cleanliness   of   the   camera  
l

enses
 r
egularly.
High pressure jet wash
When
  washing   your   vehicle,   direct  
t

he   lance   at   least   30   cm   away   from  
t

he camera.
F

P

ress this button for access to
the " 360 vision "
 sub

-menu. F

P
ress this button for access to
the " 360 vision "
 sub

-menu.
F
 
Sel
ect
 "
Camera
 O
ff".
"Front
 
camera".
"360°
 
camera". "Rear
  camera".
The view selected is displayed in the instrument panel.
360 vision
The cameras located in the front and rear b
umpers   and   under   the   door   mirrors   are a

ctivated   and   a   reconstruction   of   the   view   from
 a

bove  
y
our  
v
ehicle  
i
n  
i
ts  
i
mmediate  
s
urroundings
 i

s   displayed   in   the   instrument   panel.
Opening
  a   door   or   the   tailgate   disturbs  
t

he   360   and   rear   views.
Fitting
  the   very   cold   conditions   screen  
a

ffects   the   image   transmitted   by   the  
f

ront   camera. The
  display   in   the   instrument   panel  
d

isappears   above   9   mph   (15   km/h).
The
  image   transmitted   by   the   camera  
c

an   be   slightly   affected   by   the   presence  
o

f   the   very   cold   conditions   screen.
Driving

193
Exterior lighting controls
Main lighting
The various front and rear lamps of the vehicle a
re   designed   to   adapt   the   driver's   visibility  
p

rogressively   according   to   the   climatic  
c

onditions:
-
 
s
idelamps,   to   be   seen,
-
 
d
ipped   beam   headlamps   to   see   without  
d

azzling
 o
ther
 d
rivers,
-
 
m
ain   beam   headlamps   to   see   clearly   when  
t

he   road   is   clear.
Additional lighting
Other lamps are provided to meet the requirements   of   particular   driving   conditions:
-
 r

ear
 fo
glamps,
-
 
f
ront   foglamps   with   cornering   lighting,
-
 
d
irectional   headlamps   for   improved  
v

isibility
 w
hen
 c
ornering,
-
 
d
aytime   running   lamps   to   be   more   visible  
d

uring   the   day,
-
 
g
uide-me-home   and   welcome   lighting   to  
f

acilitate access to the vehicle,
-
 
p
arking   lamps   as   vehicle   position   markers.
Programming
The setting of some functions can be adjusted:
-  a utomatic   illumination   of   headlamps,
-
 
A
utomatic   headlamps,
-
 
g
uide-me-home   lighting,
-
 
w
elcome   lighting,
-
 
c
ornering   lighting,
-
 d

irectional
 l
ighting.
In
 
some
 
weather
 
conditions
 
(e.g.
 
low
 
t

emperature
 
or
 
humidity),
 
the
 
presence
 
o

f
 
misting
 
on
 
the
 
internal
 
sur face
 
of
 
the
 
g

lass
 
of
 
the
 
headlamps
 
and
 
rear
 
lamps
 
i

s
 
normal;
 
it
 
disappears
 
after
 
the
 
lamps
 
h

ave
 
been
 
on
 
for
 
a
 
few
 
minutes.
Travelling abroad
Halogen headlamps
For   motoring   in   countries   that   drive  
o

n   the   other   side   of   the   road,   it   is  
n

ecessary   to   adapt   the   adjustment   of  
t

he   dipped   beams   so   as   to   not   dazzle  
t

he   drivers   of   approaching   vehicles.  
C

ontact   a   CITROËN   dealer   or   qualified  
w

orkshop.
Xenon headlamps
The
  design   of   the   dipped   beam  
h

eadlamps   allows   you   to   drive   in   a  
c

ountry   that   drives   on   the   other   side  
o

f   the   road,   without   the   need   for   any  
m

odification.
In
 
the
 
event
 
of
 
the
 
failure
 
of
 
one
 
or
 
more
 
b

ulbs,
 
a
 
message
 
advises
 
you
 
to
 
check
 
t

he
 
lamp(s)
 
in
 
question.
System
 
for
 
selection
 
and
 
control
 
of
 
the
 
various
 
front
 
and
 
rear
 
lamps
 
providing
 
the
 
vehicle's
 
lighting.
5
Visibility

194
Displays
Illumination of the corresponding indicator lamp   in   the   instrument   panel   confirms   that   the  
l

ighting   selected   is   on.
The
  rear   sidelamps   and   direction  
i

ndicators   are   located   on   the   tailgate.  
W

hen   they   are   on,   opening   the   tailgate  
a

utomatically   transfers   illumination   to  
t

he   lamps   located   in   the   rear   bumper,  
t

o maintain   the   safety   of   the   vehicle.
Main lighting
Lighting off / daytime running lamps.
A utomatic   illumination   of   headlamps.
Daytime
  running   lamps   /   Dipped  
b

eam   /   Main   beam.
Sidelamps.
Dipped
  headlamps   or   main   beam  
h

eadlamps.
Turn
 
the
 
ring   A   to   place   the   desired   symbol  
a

gainst
 
the   mark.
Selection of main lighting mode
Model without AUTO lighting
Model with AUTO lighting Headlamp dipping
Pull the stalk B towards you to switch the l
ighting   between   dipped   and   main   beam  
h

eadlamps   or   to   activate   automatic   headlamp  
d

ipping.
In
  the   lamps   off   and   sidelamps   modes,  
t

he driver   can   switch   on   the   main   beam  
h

eadlamps   temporarily   ("headlamp   flash")   by  
m

aintaining   a   pull   on   the   stalk.
Visibility