2014.5 Citroen C4 PICASSO RHD boot

124
To r c h
This is a removable lamp, fitted in the side of the   boot,   which   can   be   used   to   illuminate   the  
b

oot   or   as   a   torch.
Operation
This torch operates with ni MH type
rechargeable b atteries.
It
  has   a   battery   life   of   approximately   45   minutes  
a

nd   charges   while   you   are   driving.
Use
F Extract  the   torch   from   its   location   by   pulling  i
t   from   the   front.
F
 
P
ress   the   switch,   located   on   the   back,   to  
s

witch   the   torch   on   or   off.
F
 
U
nfold   the   support,   located   on   the   back,   to  
s

et   down   and   raise   the   torch;   for   example,  
w

hen   changing   a   wheel.
Storing
F Put  the   torch   back   in   place   in   its   location  s
tarting   with   the   rear.
 I

f   you   have   forgotten   to   switch   off   the   torch,  
t

his   switches   it   off   automatically.
If
  the   torch   is   not   engaged   correctly,  
it
  may   not   charge   and   may   not   come   on  
w

hen   the   boot   is   opened.
Observe
 
the
 
polarities
 
when
 
fitting
 
the
 
b

atteries.
Never
 
replace
 
the
 
rechargeable
 
b

atteries
 
with
 
single-use
 
batteries.
Comfort

196
Operation of the rear foglamps is inhibited   with   the   tailgate   open.
Opening
  the   boot   when   these   lamps   are  
o

n   causes   them   and   their   indicator   lamp  
i

n   the   instrument   panel   to   go   off.
They
  do   not   come   back   on  
a

utomatically   when   the   boot   is   closed:  
t

hey   must   be   switched   on   again   using  
t

he   control   stalk. In
  good   or   rainy   weather,   by   both   day  a
nd   night,   the   front   foglamps   and   the  
r

ear   foglamps   are   prohibited.   In   these  
s

ituations,   the   power   of   their   beams  
m

ay   dazzle   other   drivers.   They   should  
o

nly   be   used   in   fog   or   falling   snow.
In
  these   weather   conditions,   you   should  
s

witch   on   the   foglamps   and   dipped  
b

eam   headlamps   manually,   as   the  
s

unshine   sensor   may   detect   sufficient  
l

ight.
Do
  not   forget   to   switch   off   the   front   and  
r

ear   foglamps   when   they   are   no   longer  
n

ecessary.Switching off the lighting
when switching off the ignition
When the ignition is switched off, all of the lamps   switch   off   immediately,   except   for   the d

ipped   beam   headlamps   if   automatic   guide-
me-home
  lighting   is   activated.
Switching on the lighting when
switching on the ignition
To reactivate the lighting control stalk, turn the   ring   A to position "0" 
-   lighting   off,   then t

o   the   position   of   your   choice.
If
  the   lighting   is   switched   on   manually   after
 s

witching   off   the   ignition,   there   is   an   audible
 s

ignal   when   a   front   door   is   opened   to   warn
 t

he   driver   that   they   have   forgotten   to   switch
 o

ff   the   vehicle's   lighting,   with   the   ignition   off.
They
  switch   off   automatically   after   a   period
 w

hich   depends   on   the   state   of   charge   of   the
 b

attery   (entry   to   energy   economy   mode).
Visibility

202
To avoid causing a nuisance to other road users,   the   headlamps   should   be   adjusted  
a

ccording   to   the   load   in   the   vehicle.
0.
 1

  or   2   people   in   the   front   seats.
-.
 I

ntermediate
 s
etting.
1.
 5

  people   +   maximum   authorised   load.
-.
 I

ntermediate
 s
etting.
2.
 D

river   +   maximum   authorised   load.
-.
 I

ntermediate
 s
etting.
3.
 5

  people   +   maximum   load   in   the   boot.
Manual adjustment 
o
f
 h
eadlamps
The initial setting is position "0".
Visibility

224
2nd row centre seat belt
The seat belt for the centre rear seat is built into the roof.
Fastening
F Pull  the   strap   and   insert   the   tongue   A into
the   right   hand   buckle.
F
 
I
nsert   tongue   B   into   the   left   hand   buckle.
F
 
C
heck   that   each   buckle   is   correctly  
f

astened   by   pulling   on   the   belt   webbing.
Unfastening
F Press  the   red   button   in   buckle   B, then
buckle A .
F
 
G
uide   the   seat   belt   as   it   reels   in   and   place  
t

he   tongue   B   and   then   A   on   the   magnet   in  
t

he   roof   anchorage   point.
be

fore any operation of the rear seats,
to
  avoid   damage   to   the   seat   belts  
c

heck   that   there   is   no   slack   in   the   outer  
b

elts   and   secure   their   tongues   on   the  
a

nchorage   points.   The   centre   seat   belt  
m

ust   be   fully   reeled   in.
3rd row seat belts
Fastening
F Detach  the   seat   belt   strap   from   its   retaining  l
oop   located   on   the   side   trim   of   the   boot.
F
 
P
ull   on   the   strap   and   insert   the   tongue   into  
t

he   buckle.
F
 
C
heck   that   the   buckle   is   correctly   fastened  
b

y   pulling   on   the   belt   strap.
Unfastening and stowing
F Press  the   red   button   in   buckle.
F  G uide   the   seat   belt   strap   as   it   reels   in.
F
 
S
ecure   the   strap,   flat   in   the   retaining   loop.
Ensure that the the seat belts are
secured
  when   not   in   use.
Safety

261
Changing a wheel
The tools are installed in the boot under the fl o o r.
Remove
  the   boot   carpet   for   access   to   them.
Access to the tools
List of tools*
Procedure for changing a faulty wheel for the spare wheel using the tools provided with the vehicle.
*   According   to   equipment.
al
l of these tools are specific to your
vehicle
  and   can   vary   according   to   the   level  
o

f   equipment.   Do   not   use   them   for   other  
p

urposes.
1.
 W

heelbrace.
 F

or   removing   the   wheel   trim   and   removing  
t

he   wheel   bolts.
2.
 C

hocks   for   immobilising   the   vehicle  
(except
  versions   with   manual   gearbox).
3.
 J

ack   with   integral   handle.
 F

or   raising   the   vehicle.
4.
 W

heel   bolt   cover   removal   tool.
 F

or   removing   the   finishers   on   the   heads   of  
t

he   wheel   bolts   on   alloy   wheels.
5.
 S

ocket   for   the   security   bolts   (located   in   the  
g

love   box).
 F

or   adapting   the   wheelbrace   to   the   special  
"s

ecurity"
 b
olts.
7
Practical information

262
Taking out the wheel
F Unscrew  the   central   green   screw.
F  L ift   the   spare   wheel   towards   you   from  
t

he rear.
F
 
R
emove   the   wheel   from   the   boot.as t he spare wheel is narrower than the
wheels on the vehicle, in the event of a
puncture,
  the   punctured   wheel   must   be  
c

arried   in   the   boot.
The
  spare   wheel   is   located   in   the   boot   under  
t

he   floor.
Fo

r access to the spare wheel, refer to the
"Access   to   the   tools"   section.
Access to the spare wheel
Putting the spare wheel back in
place
F Return
  the   wheel   to   its   housing.
F U nscrew the central screw a few turns,
then
  put   it   in   place   in   the   middle   of  
t

he wheel.
F
 
F
ully  
t
ighten  
t
he  
c
entral  
s
crew  
t
o  
s
ecure  
t
he  
w

heel   correctly. F
 R eturn   the   box   to   its   position   in   the   middle  o
f   the   wheel.
Practical information

263
*  Depending  on   version.   The   complete   tooling  i
s   with   the   spare   wheel.
Changing a wheelProcedure for changing a wheel with a punctured tyre by the spare wheel using the tools provided with the vehicle.
S
ome
 
of
 
the
 
tools   are   accessible   from   inside  
t

he
 
boot.
 
The
 
wheel   chocks   2 as well as the
wheelbrace
 
extension   6   are   stowed   under   the  
r

ight
 
hand
 
boot   sill.
The wheelbrace 1
  and   the   towing   eye   7 are
stowed
 
under
 
the   left   hand   boot   sill.
The
 
other
 
tools,   the   jack   3   and   the   tool   for  
r

emoving
 
the
 
wheel   bolt   head   finishers   for   alloy  
w

heels 4 ,
 
are
 
stowed   in   a   box   attached   to   the  
s

pare
 
wheel.
 
The   assembly   is   secured   under  
t

he
 
vehicle
 
in
 
a   carrier.   See   the   "Access   to   the  
s

pare
 
wheel"
 
section).
Access to the vehicle's tools*
2. Wheel   chocks   for   immobilising   the   vehicle  (
except   versions   with   manual   gearbox).
3.
 J

ack   with   integral   handle.
 F

or   raising   the   vehicle.
4.
 W

heel   bolt   head   cover   removal   tool.
 F

or   removing   the   wheel   bolt   head   finishers  
o

n   alloy   wheels.
5.
 S

ocket   for   the   security   bolts   (stowed   in   the  
g

love   box).
 F

or   adapting   the   wheelbrace   to   the   special  
s

ecurity   bolts.
6.
 W

heelbrace
 e
xtension.
 F

or   unscrewing/tightening   the   spare   wheel  
c

arrier   drive.
7.
 T

owing   eye.
Wheel with trim
When removing the wheel ,   detach   the   trim  f
irst   using   the   wheelbrace   1   pulling   at   the   valve  
p

assage   hole.
When refitting the wheel ,
  refit   the   trim  
s

tarting   by   placing   its   notch   facing   the   valve  
a

nd   press   around   its   edge   with   the   palm   of  
y

our hand.
List of tools*
all of these tools are specific to your vehicle
and   can   vary   according   to   equipment.   Do   not  
u

se   them   for   other   purposes.
1.
 W

heelbrace.
 F

or   removing   the   wheel   trim   and   the   wheel  
f

ixing
 bol
ts.
7
Practical information

265
A puncture wheel from the vehicle cannot   be   fitted   under   the   vehicle.   It  
m

ust  
b
e  
c
arried  
i
n  
t
he  
b
oot.  
U
se  
a
 
c
over  
t

o   protect   the   boot.
F
 
P

ress
 
the
 
tongue,
 
slide
 
the
 
box
 
cover
 
to
 
the
 
c

entre
 
a

nd
 
r

emove
 
i

t
 
f

or
 
a

ccess
 
t

o
 
t

he
 
o

ther
 
t

ools
 
( jack
 
and
 
wheel
 
bolt
 
head
 
finisher
 
r

emoval
 
tool
 
for
 
alloy
 
wheels).Putting the spare wheel back in
place
F Stow   the   corresponding   tools   in   the   box  a
nd   close   the   cover.
F
 
P
osition   the   tool   box   on   the   ground.
Stowing the tools
F Return  the   tools   to   the   box   and   stow   the  b
ox   in   the   vehicle's   boot.
F
 
W
ind   in   the   carrier   by   turning   the  
w

heelbrace   clockwise:   once   the   cable   is  
f

ully   wound   in   you   should   no   longer   feel  
an

y
 r
esistance.
F

S
tow the other tools in the locations
provided
  in   the   boot.
7
Practical information