2014.5 Citroen C4 PICASSO RHD seats

75
Passenger's seat backrest angle
F Pull  the   control   upwards   to   adjust   the  b
ackrest.
When
  the   backrest   angle   is   correct,   release   the  
c

ontrol.
Table position for the
passenger's seat backrest
This position, associated with the position of the   rear   seats,   allows   you   to   carry   long   objects  
i

nside   the   vehicle.
When the backrest is at the correct angle, release   the   control   lever.   To   ensure   that   the b

ackrest   does   not   suddenly   fold   for wards
 a

nd   hurt   you,   restrain   it   with   your   back   or
 y

our   hand   while   operating   the   control.
Check that there is no object that could inter fere   with   the   movement   of   the   seat,  
b

oth   above   and   below.
F
 
P

lace   the   head   restraint   in   the   low   position,  
r

aise   the   armrest   and   fold   the   fixed   table  
o

nto   the   back   of   the   seat.
F
 
P

ull   the   control   fully   up   and   tip   the   backrest  
fo

rwards.
To
 
return   to   the   normal   position,   guide   the  
b

ackrest   backwards   until   it   locks.
3
Comfort

76
Front seats
Electric adjustments
Forwards-backwards (driver's
seat)
F Push  the   control   for wards   or   rear wards   to  s
lide   the   seat.
Seat backrest angle
F Tilt  the   control   for wards   or   rear wards   to  a
djust   the   angle   of   the   seat   backrest.
Seat cushion height and angle
F operate the rear part of the control upwards   or   downwards   to   obtain   the  
de

sired
 h
eight.
F
o
p
erate the front part of the control
upwards
  or   downwards   to   obtain   the  
de

sired
 a
ngle.
To avoid discharging the battery, carry out these   adjustments   with   the   engine   running.
Before moving the seat backwards, ensure that there is nothing that might prevent the full travel of the seat, so as to avoid the risk of of jamming the   seat   caused   by   the   presence   of   objects   on   the   floor   behind   the   seat   or   rear   passengers.   If   the   seat   jams,   stop   the   movement   immediately.
Comfort

80
Electric leg rest
Manual passenger seat
F Press the front or rear part of the control to unfold   or   fold   away   the   leg   rest.
The
  movement   stops   when   you   release   the  
c

ontrol.
Heated seats control
F Use   the   adjustment   wheel   to   switch   on   and  s
elect   the   level   of   heating   required:
0 :
  Off.
1 :
  Low.
2 :
  Medium.
3 :
  High.
With
  the   engine   running,   the   front   seats   can   be  
h

eated
 s
eparately.
Before
 
operating
 
the
 
leg
 
rest,
 
ensure
 
t

hat
 
nothing
 
could
 
inter fere
 
with
 
its
 
m

ovement.Electric passenger seat
F Push   the   control   for wards   or   backwards   to  u
nfold   or   fold   away   the   leg   rest.
The
  movement   stops   when   you   release   the  
c

ontrol.
Comfort

82
Second-row seats
Forwards-backwards adjustment
F Raise the lever A ,   located   at   the   front   of  t
he   seat   cushion,   and   adjust   the   seat   to   the  
de

sired
 p
osition.
The
 
3
 
seats
 
in
 
the
 
2
nd row are independent of each other and are all the same width. Their backrests can be folded to vary the load space in the boot.
Comfort

83
F Pull the strap B  and   guide   the   seat  r
earwards.
The
  backrest   reclines   and   the   seat   base   pivots  
s

li g ht l y.
"Comfort" position
Returning the seat to the initial
position
F Pull the strap B   and   guide   the   seat  fo
rwards.
Super vise any movements of seats
when made by children. To
  remove   it:
- m ove   the   head   restraint   to   the   high   position,
-
 
p
ress   lug   A   pulling   the   head   restraint  
u

pwards   at   the   same   time.
The
  rear   head   restraints   can   be   removed   and  
h

ave   two   positions:
-  
h
igh,   position   for   use,
-  
l
ow,   storage   position.
To   raise   a   head   restraint,   pull   it   upwards.
To   lower   it,   press   lug   A   then   the   head   restraint.
Rear head restraints
Never drive with the head restraints r
emoved;   they   must   be   in   place   and  
c

orrectly
 adj
usted.
To
 
refit
 
it:
-
 
e

ngage
 
the
 
rods
 
of
 
the
 
head
 
restraint
 
in
 
the
 
o

penings
 
keeping
 
then
 
in
 
line
 
with
 
the
 
seat
 
b

ack.
Comfort head restraints
Depending on version, the sides can be folded t o   obtain   a   more   comfortable   position.
3
Comfort

84
Flat floor
Folding a seat
From the outside
F P ull   firmly   upwards   on   strap   C,
  as   indicated  
b

y   the   arrow,   to   unlock   the   seat;   keep  
p

ulling   until   the   seat   is   fully   folded.
 P

ush   the   seat   backrest   gently   for wards  
s

o   that   the   backrest   folds   onto   the   seat  
c

ushion.   The   assembly   lowers   onto   the  
f

l o o r. From the boot, when loading for example
You
  can   fold   the   second-row   seats   from   the  
b

oot,   after   first   folding   the   third-row   seats.
F

P
ull on the strap D to release the seat in
question
  then   push   for wards   lightly   on   the  
b

ackrest.
 T

o   avoid   any   damage   to   the   mechanism,  
t

he strap D   unclips   if   too   much   force   is  
a

pplied.   Simply   clip   it   in   place   again   for   the  
s

ystem   to   be   operational   again.
F
 
P

lace
 
the
 
seats
 
in
 
the
 
fully
 
back
 
position.
Each
 
seat
 
can
 
be
 
folded
 
onto
 
the
 
floor
 
to
 
vary
 
t

he
 
the
 
space
 
available
 
in
 
the
 
boot.
Comfort

85
Repositioning a seat
Before operating the rear seats, check that the outer rear seat belts are not
loose,
  to   avoid   damaging   them.   The  
c

entre   belt   must   be   stowed.   Fix   the  
t

ongues   of   the   three   belts   to   their  
anc

horage
 p
oints.
Continuity panels
These continuity panels are not
designed  to   support   a   weight   greater  
t

han   30   kg. Releasing / locking the continuity panels
F
 
B
efore   unfolding   the   continuity   panels,  
c

heck   that   the   seats   in   the   2
nd row are fully
back.
F
 
S

lide
 
the
 
continuity
 
panel
 
latch   upwards   to  
r

elease.
F
 
S

traighten
 
the
 
continuity
 
panel,   then   slide  
t

he
 
latch
 
downwards
 
to
 
lock
 
it.
F
 
I

f
 
necessary,
 
straighten
 
the
 
continuity
 p
anels
 
for
 
the
 
seats
 
in
 
the
 
2
nd row and lock t
hem
 
in
 
place.
F
 
R

aise
 
the
 
backrest
 
and
 
push
  it   rear wards  
u

ntil
 
it
 
locks
 
in
 
position. Each
  seat   has   a   continuity   panel   at   the   bottom  o
f   the   backrest,   that   once   unfolded:
-  p rovides   a   continuous   load   sur face   in   the  
b

oot, whatever the position of the seats,
-
 
a
voids   objects   sliding   under   the   seats   in  
t

he   2
nd row.
3
Comfort

86
Access to the third row
seats
Access to the third-row seats is via the outer second-row sea ts.
F

P
ull the lever E .
  The   seat   unlocks   and  
t

he   seat   cushion   comes   up   against   the  
b

ackrest.
F
 
H
old   the   lever   E   in   the   raised   position,  
p

ushing   for wards.   The   whole   seat   slides  
t

owards   the   front   seat.
Space
  becomes   free   behind   the   seat,   the   third-
row
  passengers   can   get   to   their   seats.
Leaving the vehicle from
the third-row seats Repositioning a seat, from
the outside, with the door
open
In the event of a failure of this system (
lever E ),
  the   passengers   in   the   third  
r

ow can also leave the vehicle after first
folding
  the   backrests   of   the   second-row  
s

eats   using   the   strap   D.
Do
  not   allow   children   to   operate   the  
sea

ts
 w
ithout
 s
upervision.
F

L

ift the lever E
.
 
The
 
seat
 
unlocks
 
and
 
t

he
 
seat
 
cushion
 
comes
 
up
 
against
 
the
 
b

ackrest.
F
 
P

ush
 
the
 
seat
 
backrest,
 
still
 
holding
 
the
 l
ever E
 
in
 
the
 
raised
 
position. If
 
there   are   passengers   seated   in   the   third   row:
F
 
m

anually   return   the   assembly   as   far  
a

s   possible   rear wards;   the   seat   does  
n

ot   return   to   the   fully   back   position,   so  
a

s   to   retain   legroom   for   the   third-row  
p

assengers,
F
 
f

old   the   seat   cushion   until   it   locks.
Ensure   that   there   is   no   object   on   or   under   the  
s

eat
 
that   you   want   to   move.
Before
 
operating
 
the
 
seats,
 
ensure
 
that
 
t

he
 
tables
 
on
 
the
 
back
 
of
 
the
 
first-row
 
s

eats
 
are
 
folded
 
away.
Comfort